Centripetal force and tangential force or centrifugal force and tangential force could be used as a strain analysis method.
用向心力和切向力或离心力和切向力进行胁变分析是可行的。
In this master thesis, the stress-strain relationships of thin films were measured by nanoindentation combined with dimensional analysis and finite element method.
本文以纳米压痕法结合量纲分析及有限元方法来测量薄膜材料的应力-应变关系。
According to the analysis of engineering example, the paper discussed the principle of reflected wave method and its application for detecting quality of low strain pile foundation.
通过工程实例分析，论述了反射波法低应变动载检测的原理和在桩基础工程现场检测中的应用。
Using experimental mechanical method of moire analysis, strain field distributions of LY12CZ aluminum alloy welded joints under different conditions were investigated.
采用云纹分析的试验力学方法，研究了不同情况下LY 12 CZ高强铝合金焊接接头应变场的分布特点。
By adopting finite elements method to make the the analysis of stress and strain of axisymmetric rotating shells.
本文用有限元素法对轴对称旋转板、壳进行了应力、应变分析。
The new theory and new method of the electromechanical stress and strain analysis of piezoelectric intelligent beam are studied.
研究了压电智能梁力电耦合应力应变分析的新理论新方法。
The presentation of the method is not only in favor of the adhesive analysis between the contacting faces also offers a new thought for the stress and strain analysis of microgear train.
该计算方法的提出不仅有利于微齿轮接触齿廓间粘附分析，而且对微齿轮应力应变分析提供一种新思路。
The analytical method of stress analysis strain rosette takes much time and Labour in the experimental stress analysis.
在实验应力分析中，用解析法进行应变花的应力分析，既费时又费工。
This paper introduces the method for a strain analysis of the fabric (foliation and lineation) of granite by using the theory of the strain ellipsoid.
本文介绍了利用变形椭球体理论，对花岗岩组构(叶理、线理)进行应变分析的方法。
A new method for calculating amplitudes of the local stress and strain in the strain fatigue analysis of aluminum alloy members is presented in the paper.
提出了一种在铝合金构件应变疲劳分析中，计算局部应力和应变变程的新方法。
The correlation slope of strain and water level in same borehole at the Urumqi station is computed by the regression analysis and the anomaly of slope is identified by the sieve variance method.
利用回归分析求解乌鲁木齐台同一钻孔内应变和水位的相关斜率，并用筛选法方差判定其异常，研究相关斜率和地震的关系。
Five of these anchor slab structures were analyzed by finite element method in plane strain case, and the results of analysis are fairly close to the data obtained from field observations.
本文用有限单元法按平面形变情况分析了五座锚定板挡土结构，发现分析结果与现场实测数据相当接近。
Complex number method for plane stress analysis and plane strain analysis is proposed by means of introducing the concepts of stress complex number and strain complex number in this paper.
通过引入应力复数和应变复数的概念，提出了平面应力分析和平面应变分析的复数方法。
The theory can be used to study the distributed strain, strain rate, porosity and plastic shear displacement in fault band, which presents a new method for quantitative analysis of ductile shear zone.
梯度塑性理论可用于研究韧性断层带内部应变、应变率分布规律、断层带错动位移及带内孔隙度分布规律，为韧性断层带定量分析提供了新的手段。
The DSCM for measuring tiny displacement and strain and the cubic mountain climbing coarse-fine searching method are truly validated by program imitating calculation and experimental analysis.
然后通过计算机程序运算和实验分析对数字散斑相关法测量微小位移和小变形的理论成果和正方体爬山粗细搜索法给出了验证。
The strain, geometric equation and principal strain of the elastic solid are all-sidedly studied by using the method of dyad analysis.
利用并失分析法，对弹性体的应变、几何方程和主应变进行了全面研究。
A new method for strain-based fatigue reliability analysis is constructed by considering interference between the random fatigue strain applied and capacity histories.
应用随机循环应变载荷-强度干涉模型，建立了基于应变的疲劳可靠性分析新方法。
We use mainly the squariance method among sequence samples cluster analysis and the method of optimum partition, and combine the standard of release level of seismology strain energy to divide it.
主要使用了有序样品聚类分析中的离差平方和法、最优分割法，再结合地震学应变能释放水平进行划分。
Based on equilibrium equations and stress strain relationships, an effective theory and computational method for the analysis of RC beams strengthened with FRP plates are presented.
该文基于钢筋混凝土结构设计理论中的截面平衡方程和应力应变关系，为FRP板加固的钢筋混凝土梁的计算提供了行之有效的理论和方法。
Method To link pivot shaft joint strain half dislocation morbidity age and occupation distribution statistical analysis.
方法：对寰枢关节劳损性半脱位发病年龄和职业分布统计分析。
In this paper, two new methods of determining in-situ stresses of rock masses in laboratory, acoustic emission method and analysis of typical points of stress-strain curves are investigated.
本文研究了实验室内测定岩体地应力的两种新方法——声发射法和应力应变曲线特征点分析法。
The grid method of strain analysis is one of the oldest techniques known to experimental stress analysis.
格栅法是实验应力分析中最古老的技术之一。
The result shows that predicting life by elasticity-plasticity finite element analysis is low and the maximal stress-strain cycle can be calculated accurately by the residual stress method.
研究结果表明，弹塑性有限元分析法预测的寿命偏低，由残余应力可以较准确地确定最大应力应变循环。
Secondly, based on the analysis of strain energy of flexible robot, the motion planning method to minimize strain energy of flexible robot is proposed.
通过分析，说明柔性机器人的变形能能很好地反映机器人整体弹性变形情况，因此规划变形能对减小机器人弹性误差有着积极作用。
The fatigue life is obtained by using specimens without crack and by a special analysis based on local stress-strain method in which remembrance characteristics are considered.
采用无裂纹缺陷试件进行疲劳试验得到试件的疲劳寿命，同时利用考虑了记忆特性的局部应力应变法对试件的疲劳寿命进行定量分析。
Using the method of finite element analysis and theory of mechanics of elasticity, strain profiles of soft tissues under different circumstance were calculated and presented in this paper.
本文利用有限元分析的方法，用弹性力学的理论计算得到软组织在不同情况下的应变分布。
Based on a magnetic strain model, the basic equation of finite element method for magnetoelastic bucking analysis is derived in this paper.
基于磁致伸缩模型，推导了用于磁弹性有限元分析的基本公式和理论，该模型有易于理解，推导简便，便于有限元实现的特点。
Moreover, the limiting strain method is used in the theoretical study of the flexural behavior of the beams, and the theoretical analysis shows a good agreement with the experimental results.
利用极限应变法对构件的弯曲性能进行了理论分析，其结果与试验结果吻合良好。
Method : The strain E8 was identified by morphological observation and ITS sequence analysis.
方法 ：采用形态学观察结合ITS序列分析法对E8菌株进行了菌种鉴定；
Method : The strain E8 was identified by morphological observation and ITS sequence analysis.
方法 ：采用形态学观察结合ITS序列分析法对E8菌株进行了菌种鉴定；
应用推荐