Titanium or aluminium stiffeners are being developed to strengthen those "side-of-body" points.
为了加强那些“身体两侧”的点，他们正在开发钛或铝制强化件。
Web at pressure chord between stiffeners.
加强肋之间压力弦条处的腹板。
There are two pieces of stiffeners and brackets must be replaced.
有两块加强筋和肘板要换新。
Cyclic bending tests of a box girder with longitudinal stiffeners were also carried out.
进行了纵筋加强箱形薄壁梁模型的循环弯曲试验。
How do you shape the different sections, such as, bulb plates, Angle bars, and other stiffeners.
型材怎样加工呢，像球扁钢，角钢和一些加强材？
Whether correct or not this will affect the calculation of the overall stability of bearing stiffeners directly.
计算长度的取值正确与否，将直接影响到支承加劲肋的稳定性验算。
Effects of column stiffeners, bolt arrangement, bolt number, U-steel width and U-steel extended length are studied.
研究了柱加劲肋、螺栓排列、螺栓数目、槽钢宽度和槽钢下伸长度等的影响。
The paper studies nonlinear F. E. analysis of stiffened shells, presenting beam element to simulate the stiffeners.
本文研究了加劲壳的非线性有限元分析方法，提出了一种梁元素来模拟加筋。
Strength analysis on sandwich composite material shell structure reinforced by stiffeners is performed in this paper.
本文主要研究了加筋夹芯复合壳体的结构强度。
The panel can be composed of various shapes of stiffeners. Post-weld initial deflection is considered during the process.
加劲板模型可包含多种加劲肋形状，推导过程中计入焊接残余变形的影响。
An optimization method which combines layout optimization of stiffeners with structural parameters optimization was discussed.
提出了一种将结构加筋布局优化和结构参数优化相结合的优化方法。
There is a product that the forging of rib No. 1 with high stiffeners, multipartitions and complicated shape is difficult to form.
某产品一号肋锻件筋条高、隔框多，形状复杂，工艺成型困难。
Influence of different kinds of loading on the critical buckling loads of different aspect ratio structures with and without stiffeners.
文中详细分析了这些载荷对长宽比不同的加筋板和没有加筋平板屈曲载荷的影响。
To raise the critical stress of the web, we always lay some transverse stiffeners on the web, and also lay some longitudinal stiffeners sometime.
为了提高腹板的临界应力，通常都设有腹板横向加劲肋，有时还在梁中段加设纵向加劲肋。
The flat steel plate wall shall be strengthened by the vertical stiffeners and horizontal webs, and provided with walking platform with handrails.
平板围壁应该使用垂直扶强材和水平桁加强并且提供有扶手的步行平台。
This paper deals with the application of the stiffness derivation method to calculating stress intensity factor of cracked panel with riveted stiffeners.
本文探讨了刚度导数法用于含裂纹铆接加筋板应力强度因子计算的问题。
Effective length of bearing stiffeners of steel girders has been taken as the web depth in the current Code for design of steel structures (GB50017-2003).
现行钢结构设计规范(GB50017- 2003)规定梁的支承加劲肋计算长度取腹板高度。
Examples show that by using the calculating formulas, the problems of arranging web stiffeners in structural members of gabled frames can be easily solved.
算例表明，应用所给出计算式，能较容易地解决门式刚架构件设置腹板加劲肋的问题。
The position of minimum values on the sound transmission loss curve varies with the changes made on plate thickness and the moment of inertia of stiffeners.
板厚或肋骨惯性矩的变化会引起结构传声损失曲线上隔声低谷位置的变化；
It is demonstrated that the structure tailoring method by adding stiffeners is the lightest way to achieve the largest reduction in acoustic radiation power.
通过多个声辐射数值优化计算算例，对比分析了三种结构修改方式的优化结果，比较可以发现加强筋的优化效果最好，重量最轻。
The effects of longitudinal and transverse stiffeners on quasi-static crushing of stiffened square tubes are studied with the nonlinear finite element method.
本文用非线性有限元方法研究了准静态条件下纵向和横向加强筋对加筋方形管压溃破坏的影响。
Basing upon the general buckling theory of bars with thin-walled open sections, the lateral buckling equation of bulkhead stiffeners is derived in this paper.
本文根据开口薄壁杆件稳定性的一般理论导出了舱壁扶强材的侧向稳定性方程序。
In layout optimization of stiffeners, the strain energy density sensitivity of the element was used to determine which elements of stiffeners should be deleted.
在加筋布局优化中，用单元应变能密度灵敏度作为删除单元的准则。
In this thesis, the expression of stress modification coefficients will be given when the intermediate stiffeners are set on the ring-stiffened cylindrical shell.
本文推导了加设中间支骨的环肋圆柱壳应力修正系数公式。
Galley, sanitary spaces, provision spaces, and spaces where required by rules shall be of steel bulkheads with stiffeners or insulation bulkhead at suitable intervals.
厨房，卫生间、供应品间和一些必要规范上要求的处所，应该是设有扶强材的钢质舱壁或者在适当间隔处安装绝缘舱壁。
In the optimal process, available stiffeners were added to the structure as to form the base structure, and the added elements are divided into groups base on the stiffeners.
描述了优化过程，在板结构中增加可能的加强筋形成基础结构，并将单元按加强筋为单位分组。
Then multiple factor analysis of OSC, including the thickness of outer shell, flange plate and web plate of T-shaped members, with or without ribbed stiffeners, is carried out.
采用有限元模型对外套管式节点进行包括外套管厚度、T型件翼缘厚度、T型件腹板厚度以及有无加劲肋的多因素分析，分析总结了这些因素对节点性能的影响。
By using the analysis solution of differential equations based on thin shell theory, the stresses in pressurized long cylinder or piping stiffened with stiffeners were analyzed.
对用加强环加强的受压长圆筒或管道(简称加强圆筒)应用薄壳力矩理论微分方程的解析解求解加强圆筒中的各项应力。
The exact characteristic equations for solving the critical bucking load of stiffened plate compressed and simply supported in direction of the stiffeners are derived in this paper.
对于在受压边简支，纵向加筋的受压加筋板，本文给出了求解临界载荷的特征方程的精确形式。
The exact characteristic equations for solving the critical bucking load of stiffened plate compressed and simply supported in direction of the stiffeners are derived in this paper.
对于在受压边简支，纵向加筋的受压加筋板，本文给出了求解临界载荷的特征方程的精确形式。
应用推荐