Based on the design of the stepper motor control MCU.
本设计为基于单片机的步进电机的控制。
This update makes the device of driving stepper motor control one stepper motor by 4 way .
经过设计的驱动电路分别对4个步进电机进行控制。
A distributed stepper motor control system based on serial-port extender card is designed.
设计了一种基于串口扩展卡的分布式步进电机控制系统。
TMS320C6713 stepper motor control experimental procedure, the development environment CCS.
TMS320C6713的步进电机控制实验程序，开发环境CCS。
The packaging machine for packaging bags of powder type, the metering system for the stepper motor control.
该包装机用于包装袋装的粉状类，计量系统为步进电机控制。
PLC and the stepper motor control system, suck in, translation, integration, attached, multi-steps transmission.
PLC及步进马达控制系统，吸取、平移、整合、贴附、传输多步骤。
Stepper motor tuning program for stepper motor control and testing. Step angle and automatic computer testing point of view.
说明：步进电机微调程序，用于步进电机控制与检测。测试步进角度和自动计算机角度。
On this basis a two-three beat stepper motor control circuit of the hardware interface, the program flow chart and assembler.
在此基础上提出了双三拍步进电机程序控制的硬件接口电路、程序流程图和汇编程序。
This paper introduces the application of the stepper motor control in tea twisting machine based on the SIMATIC S7-200 series PLC.
介绍了基于西门子S7系列PLC的步进电机控制在茶叶揉捻机中的应用，论述了控制系统的设计方案及其硬件的实现方法。
DANCAD and DANCAM are shareware programs written by Dan Hudgins which provide 2/3dimension drafting and CNC stepper motor control respectively.
DANCAD和DANCAM属于共享软件编写的程序由丹哈金斯提供2/3dimension起草和数控分别步进电机控制。
The operation of the stepper motor control the speed of paper, stepper motor if the device is not in place, the same will lead to abnormal paper speed.
步进电机的运转操控着走纸的速度，步进电机假如装置没有到位，同样会到致使走纸速度反常。
Stepper motor control system has been developed using the software and hardware co-simulation method, can effectively reduce the system development cycle and cost.
步进电机控制系统的开发采用了软硬件协同仿真的方法，可以有效地减少系统开发的周期和成本。
Stepper motor control can be used as a special motor, do not use their accumulated error (accuracy of 100%) the characteristics of a wide range of open-loop control.
步进电机可以作为一种控制用的特种电机，利用其没有积累误差(精度为100%)的特点，广泛应用于各种开环控制。
Very detailed stepper motor control schematics, and complete control procedures, installation can be seen after the PROTEUS simulation results, but my heart out to do, not easy!
详细说明：非常详细步进电机控制原理图，和完整的控制程序，安装PROTEUS后就可以看到仿真的结果，可是我呕心沥血做的，不容易！
In this paper, microcontroller, stepper motor driver chips, character LCD and keypad array, build a set of stepper motor controller and driver as one of the stepping motor control system.
本文应用单片机、步进电机驱动芯片、字符型LCD和键盘阵列，构建了集步进电机控制器和驱动器为一体的步进电机控制系统。
This paper introduces a simple stepper motor control chip LMD18245. By using it, we can design the drive module of stepper motor by ourselves, and thereby decrease the cost of system design.
该文介绍了一种简单的步进电机控制芯片LMD18245，利用它可以自行设计步进电机的驱动模块，从而为系统设计降低成本。
This paper describes the idle speed control stepper motor type composition, Stepper Motor Idle Control Valve on the main structure, Idle Speed Control Stepper Motor Control Principle of the device.
主要介绍步进电机式怠速控制装置的组成，步进电机式怠速控制阀的主要结构及步进电机式怠速控制装置的控制原理。
This paper discuss related technologies about stepper motor control system point of nc control functions of HMI and PLC, and introduces the design ideas of control system and soft and hard structure.
本文讨论利用人机界面和PLC控制步进电机实现数控系统点位控制功能的相关技术，介绍了控制系统方案及软硬件结构的设计思路。
Mainly by the main control box, the electrical control box, show boxes, stepper motor, close to the switch, Switching itinerary, and other related component parts.
系统主要由主控制盒、电机控制盒、显示盒、步进电机、接近开关、行程开关等相关部件组成。
This paper discusses a minimum of parameters to determine the trajectory of a circular interpolation method and the method of frequency control stepper motor.
文中讨论了一种以最少参数确定一条圆弧轨迹的插补方法和步进电机变频调速的方法。
Fan(C&R) Module, Stepper motor, Control panel (device), Sensor, Blower Unit, etc.
冷凝风扇，步进电机，控制面板（器），传感器，鼓风机等。
For example, a stepper motor requires a series of digital pulses as an input to control the motor position and speed.
举例来说，步进电机需要输入一系列数字脉冲信号来控制电机的位置和速度。
Speed and rotation direction of two stepper motor are controlled through procedures designed, and accuracy of the procedures control is detected by the waveform measurements.
通过程序设计对两台步进电机的转速和旋转方向进行控制，并且通过实际测量的波形信号检测了程序的控制精度；
The hardware and software of the system, the method to control the stepper motor as an actuator have been discussed in detail in this paper.
控制系统的硬件、软件和执行机构步进电机的控制方法都在本文中进行了介绍。
This paper devices a kind of control system of the stepper motor based upon CPLD.
本文设计了一种基于CPLD的步进电机控制系统。
To set the proper parameter of register and on-chip ram of TMC428, it can make TMC428 control three stepper motor in the same time, and realize three-axis control system.
通过设置TMC428内部参数寄存器和片内ram的值，可使TMC428能够同时控制三个步进电机，实现三轴控制系统。
And through the stepper motor, pumps, electric films, such as plant growth lights for the implementation of the parameters of control, intelligent control to achieve the objective.
并且通过步进电机，抽水机，电热片，植物生长灯等执行器对参数进行控制，达到智能调控的目的。
The common microcontroller AT89S51 and the driving chip of the stepper motor L298N are used to implemented driving and control of the stepper motor.
采用常见的AT 89s51单片机和步进电机驱动芯片L 298n实现步进电机的控制和驱动。
The common microcontroller AT89S51 and the driving chip of the stepper motor L298N are used to implemented driving and control of the stepper motor.
采用常见的AT 89s51单片机和步进电机驱动芯片L 298n实现步进电机的控制和驱动。
应用推荐