The centerpiece of this plan was the group of sixty-story skyscrapers built on steel frames and encased in huge curtain walls of glass.
这个计划的核心在于六十层由玻璃幕墙所包裹的钢框架摩天大楼。
With the rapid development of the economy, the technology of steel frames is widely used in various civil and industrial buildings.
经济的飞速发展,使得钢结构技术越来越多地应用在各种民用建筑和工业建筑中。
Some references are provided for the design of the steel frames considering the secondary stresses.
该结论可为考虑次应力的钢屋架的设计提供参考。
A synthetic discrete method is presented for the analysis of the inelastic stability of space steel frames.
本文采用综合离散化分析方法进行空间钢框架结构的弹塑性稳定计算。
Precise impedance analyzer HP4294A has been used for experiment research on beams, slabs and 3 floors of steel frames.
利用精密阻抗分析仪hp4294 A对梁、板和三层钢框架进行了实验研究。
In this page, two practical methods suitable for design of semi-rigid steel frames under vertical loads are introduced.
本文主要研究了竖向荷载下半刚性连接钢框架的内力计算方法。
Many steel frames suffered from unexpected brittle fracturing of beam-to-column connections in the Northridge earthquake.
美国北领地震中,不少钢框架梁柱连接出现了意想不到的脆性破坏。
The steel frames resist lateral loads applied in the short direction while diagonal bracing stabilizes the building longitudinally.
当斜向支撑确保纵向稳定时,钢框架结构只需抵抗短方向的侧荷载。
The modeling of hybrid structures comprising external steel frames and core concrete tube is simplified for nonlinear seismic analysis.
将高层钢混凝土混合结构分为外部钢框架和内部混凝土核心筒两部分。
The research on effect of joints'behavior on structures was early at steel frames field and can trace back from the early 20th century.
节点性能对钢框架结构影响的研究起步较早,大约可以追溯到20世纪初。
This paper applies nonlinear finite element program BSNFEM to analyze the behaviors of eccentrically braced steel frames under cyclic load.
应用BSNFEM非线性有限元程序对偏心支撑钢框架进行了循环加载分析。
The materials include wood, glass, steel and concrete. Flattened walls contrast with the wood ceilings, and the glass windows with steel frames.
这些材料包括木材、玻璃、钢铁和混凝土。扁平的墙壁与木天花板形成对比,窗户上的玻璃与钢框架形成对比。
The secondary stresses of typical planar steel frames due to the rigidity of panel points are calculated by the finite element analysis program.
应用有限元分析软件,对两种跨度下典型平面钢屋架节点刚性所产生的次应力进行了分析计算。
Since power plant boilers have become massive, their steel frames have become more and more complex, hard to be mastered by conventional calculation.
电站锅炉大型化以后,钢构架也变得更为复杂,普通的计算已难以满足要求。
A vast amount of information data must be input before finite element analysis of steel frames, such as node information, element information and load information.
多高层钢框架在进行有限元计算时,必须首先输入大量的信息数据,包括节点信息、单元信息、荷载信息等。
It is proposed that the minimum structural influencing coefficient value can be 4 for moment-resisting steel frames in Chinese earthquake resistant design of structure.
建议在我国的结构抗震设计中,抗弯钢框架的结构影响系数最小值可取4。
Displacement of stress-resultants computation technique of semi-rigidly connected steel frames inclucing stiffness matrix method, hand calculation method has been proposed.
本文提出了半刚性连接钢框架位移和内力计算的刚度矩阵法,另外还提出了在水平荷载和竖直荷载作用下内力的简化计算方法。
The stiffness matrix of semi-rigid steel frames and the fixed end moment are deduced, based on the connection element method incorporating the effects of joint flexibility.
采用连接单元法,考虑连接柔性的影响,推导出半刚性框架梁柱的刚度矩阵及半刚性梁的固端弯矩。
Existing models of joints 'were based on the semi-rigid beam-column joints of steel frames and had many limitations, so they were not suited to welded hollow spherical joints.
已有节点模型主要是针对钢框架梁柱半刚性节点提出的,具有很大局限性,不适合于焊接空心球节点。
Bachelor of Science degree or above in Mechanical Engineering; Knowledge of engineering design for Belt Conveyor Systems & Components (idler, steel frames & pulleys) preferred.
大学或以上学历,机械专业,最好具有胶带机及其部件(托棍、钢结构、滚筒)的技术设计知识。
Hysteretic behavior of steel beam-column web connections in steel frames under cyclical load is simulated by finite element method involving material, geometry and status nonlinear.
考虑材料、几何和状态三重非线性,对钢框架梁柱腹板连接在循环荷载作用下的滞回性能进行了有限元模拟。
To bring the system reliability-based design theory to use in the design of steel frames, the actual evaluation for the system reliability of steel frames used in engineering is needed.
为了将基于结构体系可靠度的设计理论运用到钢框架结构的设计中,必须对工程中钢框架结构的体系可靠度做出实际的评价。
This paper presents a simplified plastic zone method with consideration of the influences of the plastic zone length on the stiffness matrix for elastic-plastic analysis of steel frames.
对于杆件单元,本文采用了一种变刚度的杆单元模型,建立了考虑塑性铰分布长度影响的构件单元刚度矩阵。
This paper summarizes how to use RRSD to finish aseismatic design for high-rise steel frames under frequently occurred earthquake action and verifies it by spectra analysis and time-history analysis.
总结了高层钢框架结构多遇地震下的合理刚度设计方法,并对该设计方法进行了反应谱和时程的验证分析。
This paper summarizes how to use RRSD to finish aseismatic design for high-rise steel frames under frequently occurred earthquake action and verifies it by spectra analysis and time-history analysis.
总结了高层钢框架结构多遇地震下的合理刚度设计方法,并对该设计方法进行了反应谱和时程的验证分析。
应用推荐