The influences of the steam parameters on the size of the distributor are also briefly treated.
另外锅炉蒸汽参数对布风板面积大小的影响也作了简要的说明。
Thermodynamic design of boiler feed pump turbines has to deal with steam source switching and changes of steam parameters.
锅炉给水泵汽轮机热力设计中必须进行变参数变汽源的汽源切换计算。
Optimizing the steam parameters of HRSG under subcritical condition can increase the efficiency to F technology combine cycle.
在亚临界范围内，对余热锅炉的蒸汽参数进行了优化；
With expansion of refinery capacity. the higher steam parameters and steam quality are required in operation to reduce the energy consumption.
随着炼油厂规模的扩大，为降低能耗，蒸汽参数越来越高，对蒸汽品质的要求更加严格。
The methods to be presented are: increased dry solids content of black liquor, air preheating, soot blowing arrangement, feedwater preheating, steam parameters and heat recovery after precipitator.
将要介绍的这些方法为：增加黑液固形物含量、空气预热、吹灰系统、给水预热、蒸汽参数和电除尘后的热回收。
The methods to be presented are: increased dry solids content of black liquor, air preheating, soot blowing arrangement, feed water preheating, steam parameters and heat recovery after precipitator.
本文将要介绍的方法为：增加黑液固含量、空气预热、吹灰系统、给水预热、蒸汽参数和电除尘后的热回收。
Therefore, steam injection parameters for Nine-7 Block were analyzed and optimized using orthogonal experiment design.
为此，利用正交试验设计方法对九7区注汽工艺参数进行了敏感性分析和优化。
The dynamic thermal hydraulic model of Once Through Steam Generator (OTSG) is developed, Which characterized by lumped parameters with moving boundary.
采用集中参数处理方法，把直流蒸汽发生器二次侧按流体相变分区，建立了动态热工水力模型。
Project and system situation in Zouxian Power Plant were introduced, and the piping design parameters and the piping material of main steam system and main feed water system were determined.
对邹县发电厂四期工程和系统状况进行了介绍，确定了主蒸汽系统和主给水系统管道的设计参数，选择了管道材料。
This Paper introduces the interface design between 80c196kb and the memory storing configuration function parameters for a steam boiler control system.
本文介绍了某造汽锅炉控制系统中的组态功能参数存储器与80c196 KB接口的设计。
This paper primarily introduces the basic characters, hazards of salmonella, and the mechanism, parameters of feed conditioning for steam sterilization as well as the novel feed conditioners.
着重介绍了沙门氏杆菌的一些基本特性、危害以及结合调质用蒸汽灭菌的机理、参数和国际上最新的调质灭菌设备。
Volumetric expansion coefficient and compressibility of water and steam are important parameters usually applied in the reactor thermal hydraulic, heat transfer and engineering thermodynamics.
水和蒸汽的体膨胀系数和压缩率是反应堆热工水力、传热学和工程热力学中常用的参数之一。
The sensitivity analysis indicates that the parameters impacting the production results from high to low are production time, steam dryness, cyclic steam injection volume, steam injection pressure.
敏感性分析表明，蒸汽参数对开发效果影响的顺序从大到小依次为生产时间、注汽干度、周期注汽量、注汽压力、焖井时间和注汽速度；
The operation condition and technological parameters optimization and adjustment of TC201 air compressor units are introduced. The steam consumption is reduced, the production cost is decreased.
论述了TC 201空气压缩机组性能运行状况和工艺参数优化。使之降低蒸汽消耗，降低生产成本。
The important parameters acquisition and manual adjustment to run parameters of steam boiler are accomplished by the slave computer.
下位机完成注汽锅炉重要参数的采集，对注汽锅炉的运行参数进行手动调节。
Through numerical modelling, this paper studies the process parameters of steam drive such as steam injection rate, production injection ratio, and steam quality.
利用数值模拟方法对蒸汽驱中注汽速度、采注比和蒸汽干度等工艺参数进行了研究。
The boiler super-heater steam temperature control object is generally with characteristic of parameters slow time variable, the great inertia and the larger time lag.
锅炉过热器蒸汽温度受控对象通常具有大惯性、大迟延、参数慢时变等特点。
This scrap mostly expatiate on mian technical parameters for the steam hammer refit to a electro_hydraulic hammer, and refer its benefits on save energy.
介绍了蒸气锤改造成电液锤的主要技术参数及改造后电液锤的节能效果。
The level of oil production using steam injection technique directly depends on the heat efficiency of steam injection, and the heat efficiency can be determined by injection-production parameters.
蒸汽吞吐热力采油的效果取决于由注采参数决定的注入蒸汽的热能利用程度。
The calculation method of some important parameters, such as the heat transfer coefficient, dead time and so on of the closed steam tube rotary dryers was proposed.
提出了密闭型蒸气管回转干燥机传热系数及停留时间等主要工艺参数的计算方法。
The difference expansion of the steam turbine reflects the gap change between the dynamic and static parts of the turbine, which is one of the important parameters to protect its safe operation.
汽轮机差胀反映出汽轮机动静部分的间隙变化，是保护汽轮机安全运行的重要参数之一。
Must be clear about the flow measurement range, on the basis of choice in conformity with the relevant operation parameters of the steam flowmeter, which can bring into full play.
必须明确流量测量范围，在此基础上选择符合相关运行参数的蒸汽计量仪表，使其能充分发挥作用。
The economics of steam turbo units will be affected if major turbine parameters deviate from the designed values, in view of which a set of computational formulas is presented.
针对汽轮机各主要参数偏离设计值会对机组经济性造成影响，提出一套计算方法。
The parameters of steam distillation for extracting onion oil were optimized.
优化了水蒸汽蒸馏提取洋葱油的适宜工艺参数。
In order to achieve maximum recovery rate and the optimum economic results, steam injection parameters must be optimized.
为了获得蒸汽驱油藏最大采收率和最佳经济效果，必须对蒸汽驱注入参数进行优选。
This new method can be used to calculate the changes in the work done by fresh steam while the thermal system and any local parameters vary. Two examples are given to check the algorithm.
这样，应用等效热降的法则，不但可以计算热力系统局部参数及系统变化时单位新蒸汽做功的变化，还可以计算这些局部参数变动所引起的上述其它参数变化量。
The effect of the parameters of steam system on the characteristic of the constituent part and the overall performance of the combined gas steam cycle is studied.
研究了蒸汽系统的参数选择对联合循环部件及总体性能的影响。
Steam injection parameters design is very important, which extremely affects success of steam flooding.
蒸汽驱的注入参数对蒸汽驱驱油效果影响非常大。
Cogenerations economy analysis proved the benefits from the fitting of high parameters boilers and steam turbines.
经济分析证明，采用高参数的锅炉和汽轮机更具优势。
By test the parameters of temperature and pressure, we could analyze the formation of steam cavity in the steam driven blocks, steam cavity distribution in space and time.
通过测试的温度压力数据可以分析蒸汽驱块的蒸汽腔的形成，蒸汽腔空间和时间分布。
应用推荐