Combination of steady state optimization with dynamic state optimization was presented to optimize ethylene epoxidation reactor.
提出了乙烯氧化反应器定态和动态优化相结合的优化策略。
The iterative learning control is studied for the procedure of industrial process steady state optimization in order to improve the dynamic performance of control systems.
针对具有噪声的工业过程稳态优化进程，提出迭代学习控制以期改善控制系统的动态品质。
The development of the discrete state space models for computer control and operation optimization of reheat furnaces is presented in this paper.
本文论述了一个应用于加热炉计算机控制和优化操作的离散状态空间模型的开发。
Optimization controller for linear discrete-time state space model is designed.
设计出线性离散状态空间的最优控制器。
We develop a fringing state space model used in the continuous annealing furnace computer optimization control.
本文开发了一个用于连续退火炉计算机优化控制的离散状态空间模型。
Two stage hierarchical optimization control algorithm is adopted for steady state large sized system with its subsystem performance indices coupling in a certain order.
对于子系统的性能指标按一定顺序耦合的稳态大系统，采用两级递阶优化控制算法。
The energy consumption at stand-by state can be reduced by 21% after the optimization of the switchover condition.
最后对电源状态的转换条件进行了优化，优化处理后待机态的能耗节省了21%。
Optimization algorithms are provided for a class of closed queueing networks with a general performance cost that depends on both the state of the network systems and the service rate of each server.
讨论了一类闭排队网络的优化算法。该闭排队网络具有一般的性能指标函数，它既依赖于网络系统的状态，又依赖于每个服务者的服务率。
In addition, the flight path optimization algorithm based on energy state approximation is summarized.
而且，总结了基于能量状态近似法的飞行轨迹优化算法。
Based on the basic concept of the un-deformed pretension of cable, the optimization model of finished state with multi-objective and multi-constraint is used.
基于不变形预张力的基本概念，建立了斜拉桥成桥状态的多目标、多约束的优化模型，并通过有限元程序求解成桥索力。
In this paper, the dynamic optimization model is established and the train running state of optimum energy consumption is simulated with the help of computer.
本文采用动态最优化模型，借助计算机对列车运行状态进行模拟，求出其以节能为目标的优化运行方式。
This optimization set up sign chart; evaluated other amount character by status probability in the state of stabilization.
该最优化通过建立系统状态标记图，由稳定状态下的状态概率求出其它数量特征。
It analyses the slope stability in the state of natural condition with the residual thrust method and new anti-slide pile optimization method.
采用剩余推力法和新的抗滑桩优化方对该滑坡体天然状态工况进行了稳定分析。
Under the condition of given parameter, the two common driving cycles were simulated with the instantaneous optimization strategy based on SOC (state of charge) balance.
在设定参数条件下，以基于电量平衡的瞬时优化策略对两种常见行驶工况进行了整车仿真。
Furthermore, the precision improvement of state estimation due to incorporation of PMU is analyzed based on the model and particle swarm optimization (PSO) is applied to solve the placement of PMU.
基于此模型，本文还进一步分析了引入pmu后对状态估计精度的影响，从而提出了基于粒子群优化算法(PSO)的PMU配置。
It sets the voltage feedback parameter directly according to the regulation precision for steady state while realizes the multi-variable coordinated optimization control.
既根据稳态调节精度的要求设定电压反馈系数，又实现了多变量协调优化控制。
Studying the structure optimization of the operating unit thermodynamics system with the classic optimization method, using the theory of equivalent enthalpy drop and state equation.
利用等效热降法理论以及热力发电厂热力系统经济性状态方程的理论，采用经典优化方法对运行机组的热力系统进行结构优化。
In this paper, a concept of reasonable finished dead state of cable-stayed Bridges and existing methods of cable tension optimization for cable-stayed Bridges are firstly introduced.
本文首先介绍斜拉桥合理成桥状态的概念和现有的斜拉桥索力优化方法。
The methods to reduce the machine tool thermal deformation are: thermal error modeling and compensation, temperature control, optimization design of thermal state characteristics.
减少机床热变形的方法为：进行热误差建模和补偿，温度控制，热态特性优化设计。
In the paper, two methods of steady state object realization, the aggregative performance method and the multiobjective optimization method, are presented to meet thee.
由于经济指标一般表述为静态目标，本文对“胖系统”预测控制中静态目标的实现提出了综合性能指标法，改进了多目标优化法。
This proposed modeling idea can also be applied to dynamic reactive optimization, optimal power flow and state estimation for a faster calculation.
这种建立模型的思想还可以应用到需要计算海森矩阵的动态无功优化、最优潮流以及状态估计等问题的算法中，以提高其计算速度。
In molding process, process variables directly impact flow state of melt in cavity and final quality of part. Precondition of improving part quality is to get and keep process variables optimization.
成型过程中，工艺参数直接影响到模具内熔体的流动状态和最终制品的质量，获取并保持优化的工艺参数是成型高质量制品的前提。
A method for parameter optimization is presented. The minimum-norm of state feedback matrix and optimal pole assignment also are studied in this paper.
本文提出一种参数最优化的方法，对状态反馈阵最小范数问题和最优极点配置问题进行了探讨。
It also can help us to find the equipment run state and motion rule, to ensure treatment safely and effectively, and supplied theoretical base for the equipment optimization design.
检测了设备的现行运行状态及运动规律，确保治疗安全有效，并对设备优化设计提供更加科学、严谨的理论依据。
The process includes the technique such as operation condition identification, optimization in operation region of adjustable parameters and state of restriction.
设计方案通过在线工况识别、区间优化和约束条件运算等技术完成了整个优化算法。
Geometry optimization is possible also for state average RASSCF energies.
几何优化也有可能为国家的平均RASSCF能量。
Geometry optimization is possible also for state average RASSCF energies.
几何优化也有可能为国家的平均RASSCF能量。
应用推荐