There are no spring element and damp in the structure and its sensitivity is very high.
结构中没有弹性元件，也没有阻尼，灵敏度和敏感性都很高，可以实现单道单只勘探；
The spring element stiffness is related to pre yield shear modulus of MR fluid and accumulator stiffness.
该弹簧单元与磁流变液屈服前区的初始剪切模量和蓄能器的刚度等有关。
The invention provides for the spring elements (4, 5) to be connected to at least one further elastic element.
根据本发明， 所述弹簧元件（4、5）与至少一个其他弹性元件相连。
Because moving joints are all bearings, we can make use of spring element of software "ANSYS" to take place of all bearings.
由于活动关节都是回转关节—轴承，在ANSYS软件中采用弹簧单元模拟替换。
Considering nonlinear rigidity of spring element, this dissertation use neural network control strategy to control semi-active suspension.
由于空气弹簧的非线性，所以采用神经网络控制调节空气弹簧的刚度，以期使悬架系统达到理想的减振效果。
Plate element is used to simulate tunnel lining, road slab and vertical brace, and spring element simulate the interaction between soil and tunnel.
文中隧道衬砌、路面板和竖向支撑用板单元模拟，土与隧道的共同作用用土弹簧模拟。
Using non-linear 3-D rigid body-spring element method, this paper studied the influence of geo-stress on in-situ shear tests of an undergoing project.
采用三维非线形刚体弹簧元法，对小湾坝肩槽开挖边坡进行应力应变及稳定分析，对计算成果进行评价分析，进而评价了工程加固措施。
According to measuring datas, illustrated position of strain gages on spring element is analysed and the size series of a new spring element are designed.
根据测定结果进行了弹性元件的贴片位置分析和一种新型弹性元件系列尺寸设计。
To achieve this, the device comprises a spring element (190), which moves the delivery element into the distal end position when the container is replaced.
为此，该装置包括弹性元件（190），在更换容器时，该弹性元件（190）导致输送元件运动进入其远侧端部位置。
The relation between load and deformation of the spring element is analysed and the calculating methods of constant angle and maximum axial load are set up.
本文研究了自动调心分离轴承装置的结构和调心原理，分析了弹性元件载荷与变形的关系，给出了分离轴承接触角和极限轴向负荷的确定方法。
For surface crack in pipe, this paper presents the finite element model including line spring element that is used for J integration calculation, as well as numerical examples.
对管道上的表面裂纹采用线弹簧单元，建立了裂纹管道J积分计算的有限元模型，给出了J积分的计算实例。
Two types of nonlinear spring elements were incorporated into the finite element program to simulate tensile and shear tractions, to analyze the thermally induced failure of interfaces.
并在界面上引入承受剪切和拉压的两种非线性弹簧单元，模拟了界面的热致失效问题。
51 environment, the contacting rigidity between slide block and linear guideway was simulated with spring elements, the finite element model of the machine tool was set up, and the static rigid.
51环境中，用弹簧单元来模拟滑块与直线导轨的接触刚度，建立了机床的有限元模型，并对其静刚度进行了分析。
The planet Mercury rules Gemini and the element is air and the favorite season is spring.
属性主宰者双子座，成分是空气，最喜欢的季节是春天。
Normally the element is in the default namespace, so traditional Spring bean definitions do not need prefixing.
通常，元素是在缺省的命名空间，因此传统的Springbean定义并不需要前缀。
Finally, there are some minor syntactical differences that need to be changed; for example, the ref element inside a property element has an id attribute instead of the bean attribute used in Spring.
最后，需要更改一些小的语法差异；例如，一个属性元素内的ref元素有一个id属性，而非spring中使用的bean属性。
The Nonlinear Finite Element Analysis was applied to study the stress and modal of an air spring, which is composed of composites with multiple orthotropic materials.
运用非线性有限元分析技术，对由多层正交各向异性复合材料组成的某型空气弹簧进行了应力和模态分析。
The failure criterion, formula and determination of analytical parameters such as spring modulus of the discrete element model for concrete material were presented.
介绍了适于混凝土材料的离散单元模型的破坏准则、计算方程以及弹簧系数等计算参数的确定方法。
In the third part, the concept of coupling element is derived from the vibration analysis of a four-degree spring-oscillator system, and a whole transfer matrix method is developed on the basis of it.
第三章从一个四自由度弹簧振子的振动分析问题提出耦合单元的概念，建立了多转子系统振动分析的整体传递矩阵法；
Both the general spring coefficient matrix of flexible connector and the mass matrix of discrete element are off-diagonal.
推导出一般情形下柔性连接元的广义弹簧系数矩阵和刚体元的质量矩阵都是非对角的。
Air suspension system is a generic term for the suspensions which make air spring as its elastic element.
空气悬架系统是以空气弹簧作为弹性元件的悬架总称。
The elastic element of air suspension system is air spring. Air spring utilize the compressibility of air to realize its elasticity.
空气悬架系统以空气弹簧为弹性元件，利用气体的可压缩性实现其弹性作用。
Rubber sandwich spring is widely used in the world as an elastic element of secondary suspension on locomotives.
橡胶堆旁承作为机车二系悬挂的弹性元件，已在国内外铁路上得到了广泛的应用。
Finite Element Analysis on air spring should play a more and more important role for the design and manufacture in the future.
本文的分析对空气弹簧的结构设计和优化有一定的参考价值。
This paper introduces the steps of developing parametric finite element analysis by APDL and put a cylinder spring as an example expatiates the realization process in detail.
文章介绍了采用APDL进行参数化有限元分析的实施步骤，并以圆柱弹簧为例，详细阐述了这一过程的实现。
The membrane spring detector is a device used for detecting the dynamic characteristics of elastic element in the car clutch.
膜片簧检测机是用于检测汽车离合器中弹性元件力学特性的装置。
During the finite element calculation of vehicle frame, the simulation of front leaf spring in the complete frame finite element mould must be considered.
在汽车车架有限元计算中，必须考虑前钢板弹簧在整个车架有限元模型中如何模拟。
The finite element model, computation response of driving force and dynamic characteristic are established by taking double mass spring damping system for example.
以双质量弹簧阻尼系统为例建立有限元模型，计算动力响应以及动态特性。
A nonlinear finite element method was applied in the research of the collector head spring system of pantograph.
将非线性有限元理论应用于机车受电弓弓头弹簧系统的研究。
A nonlinear finite element method was applied in the research of the collector head spring system of pantograph.
将非线性有限元理论应用于机车受电弓弓头弹簧系统的研究。
应用推荐