High speed scanning galvanometer, fine marking, stable and reliable.
高速扫描振镜，打标精细、稳定可靠。
This paper proposes a learning control based high-speed scanning mode for an AFM system.
本文针对原子力显微镜系统，提出了一种基于学习控制的快速扫描模式。
Other technical and engineering problems associated with high speed scanning systems are also investigated.
此外，还对转镜在高速旋转时所涉及的其它一些技术问题进行了探讨。
By combining high-speed scanning and high-resolution optics, it has scanning performance of 1000 data points up to 150 Hz.
通过将高速扫描和高分辨率光学相结合，使其拥有扫描1000个数据点，达150赫兹的扫描性能。
The biggest difference in accommodative variance was between a video display with slow-speed scanning and an equivalent laser-scanned display.
调节方差的最大差异出现在处于低速扫描的视频显示器和激光扫描显示器之间。
Rapid Prototyping Desktop System needs not only to achieve enough part precision in high speed scanning but also to reduce the vibration and noise as most as possible.
桌面化快速成形系统不仅需要在高速扫描时保证足够的精度，还需要尽可能地减小振动和噪声。
Of course sheet scanning speed may vary depending on the scanning equipment, if with high-speed scanning speed, that just like the speed of paper money, everyone knows that how fast.
当然答题卡扫描速度的快慢取决于所用的扫描设备了，如果用高速扫描仪扫描的速度，那就像点钞机过钞票的速度一样，大家都知道那有多快。
The Nessus vulnerability scanner provides several important scanning features, such as high-speed discovery, asset profiling, and vulnerability analysis.
Nessus漏洞扫描器提供几个重要的扫描特性，比如高速发现、资产概况和漏洞分析。
The Nessus vulnerability scanner provides several important scanning features, such as high-speed discovery, asset profiling, and vulnerability analysis.
Nessus漏洞扫描器提供几个重要的扫描特性，比如高速探测、资产分析和漏洞分析。
No matter what kind of scanning equipment sheet scanning into images into the computer to read speed is much faster than manual marking.
其实不管用什么扫描设备将答题卡扫描成图片存进电脑再阅卷的速度远比人工阅卷快得多。
An analytical expression for spot moving speed on the former vibrating mirror of the polygonal mirror scanning system objective is derived from geometrical optical principle.
根据几何光学原理，推导出转镜-振镜扫描系统物镜前振镜上光斑移动速度的解析表达式。
Computer memory play, and set various broadcast modes such as time play, double frequency scanning, low speed, stop motion, paragraphs repeat, etc.
电脑记忆播放，设置时间播放，倍速扫描、慢速、逐格、段落重复等多种播放方式。
The line width of nanostructures is influenced by many factors such as tip curvature radius, detained time in the base surface, scanning speed, humidity, surface roughness etc.
尖端曲率半径、针尖在基底表面滞留时间、针尖扫描速度、空气湿度、表面粗糙度等均会影响纳米结构的线宽。
The influence of laser power, scanning speed, powder feed rate, spot diameter and preheating on the temperature of molten pool were revealed in the process of single-pass cladding.
在单道熔覆中通过跟踪测量研究了激光功率、扫描速度、送粉速率、光斑直径和基体预热温度对熔池温度的影响规律。
Formally speaking, if the parameters such as scanning speed, physical properties are given, the calculation result of heat effect of laser on temperature field can be wholly confirmed.
从形式上来看，对于给定扫描速度及材料热物性参数后，激光热作用温度场的计算结果已经是完全确定的事。
The speed matching between big-inertia mirror and fast-steering mirror is very important in staring and scanning system.
在凝视扫描系统中，大惯量反射镜与快速控制反射镜的速度匹配非常重要。
The influence of coating, spot size, power and scanning speed on hardening layer features and wear resistance were studied.
研完了表面状态、斑尺寸、率及扫描速度对硬化层特征及耐磨性的影响。
Furthermore, the scanning speed has an important influence on the size of phase change region and thermally affected region.
激光扫描速度对相变硬化区和热影响区的大小有极大的影响。
Results EBCT had the advantage of high speed in scanning and high resolving power of time without mechanical abrasion due to the using of electron beam.
结果：电子束ct使用电子束的磁偏转代替球管机械运动，既加快扫描速度，又减少机械磨损，有很高的时间分辨率。
The scanning speed of nozzle has a great effect on the pore structure of copper deposits.
喷嘴移动扫描速度对铜电铸层多孔结构有明显的影响。
According to the feature of SLS, the parameters of interest are layer thickness, hatch spacing, laser power, scan speed, work surroundings temperature, interval time and scanning mode.
根据SLS加工工艺的特点，研究的工艺参数包括：层厚、扫描间距、激光功率、扫描速度、环境温度、层与层之间的加工时间间隔和扫描方式。
The effects of different process parameters such as laser power, scanning speed, preheat temperature, powder-bed depth on the sintered quality were studied systematically.
系统研究了激光功率、扫描速度、预热温度、铺粉厚度等工艺参数对成型试样质量的影响。
The imaging spectrometer using diffractive optics has compact construction, small volume and rapid scanning speed, and its practical ground manufacture have been visible.
采用二元光学元件的成像光谱仪结构紧凑，体积小，扫描速度快，已研制出地面实用型产品；
The external factors, including the slope, gloss, roughness, color of the tested surface and the scanning speed, are discussed from the practical point.
并从实际使用角度分析了影响传感器精度的外部因素，其中主要包括被测表面倾斜、表面光泽、粗糙度、颜色以及扫描速度等。
Dual galvanometer scanning is a working of high accuracy, high speed, reliable movement.
双振镜扫描运动是一种精确度高、速度快、运行稳定的工作方式。
The martensitic and undissolved carbide contents continuously increase as the laser scanning speed increases while the residual austenite decreases.
随激光扫描速度增大，试样中的马氏体和未溶碳化物的含量不断增加，残余奥氏体含量则连续下降。
The conventional mechanical scanning radar is gradually replaced by powerful electric scanning phased array radar in the application as an airborne radar due to its limited scanning speed.
传统的机械扫描雷达由于受其扫描速度的限制，在机载雷达的应用中已逐步被功能强大的电扫描相控阵雷达所取代。
While, Uses multi CCD, the scanner to be possible to enhance the scanning width, the scanning speed and the scanning precision, in the similar product this is a prominent superiority.
同时使用多个CCD的扫描仪可以提高扫描的幅面、速度及精度，在同类产品中这是个突出的优势。
Focusing on the problem such as slow scanning speed, complex system design and low light efficiency, a simple method to obtaining optical sectioning in multiple-beam confocal measurement was proposed.
针对共焦测量中单点扫描速度慢、机构复杂、光能利用率低的问题，介绍了一种利用结构光和共焦显微术相结合来实现多光束测量的新方法。
Focusing on the problem such as slow scanning speed, complex system design and low light efficiency, a simple method to obtaining optical sectioning in multiple-beam confocal measurement was proposed.
针对共焦测量中单点扫描速度慢、机构复杂、光能利用率低的问题，介绍了一种利用结构光和共焦显微术相结合来实现多光束测量的新方法。
应用推荐