Thermal effect of the crystals seriously affects LD pumped solid state lasers 'performance.
激光晶体这种热效应严重影响着激光二极管抽运全固态激光器的性能。
A coherent combining scheme for two solid state lasers was proposed by using Michelson cavity technique.
提出了采用迈克尔逊干涉复合腔技术进行两路固体激光器相干合成的实验方案。
Beams combination is the only way for development of high power and high beam quality solid state lasers.
光束合成是研制高功率、高光束质量固体激光器的必由途径。
The conception and merit and fabrication method of composite configuration operation material in solid state lasers is introduced.
介绍了固体激光器中复合结构工作物质的概念、优点和制作方法。
The size of composite configuration on per method and the improvement degree of laser activity on solid state lasers are reported in detail.
详细总结了每种方法制作的尺寸大小及应用于固体激光器中激光性能方面的改善程度。
The output parameters such as beam divergence angle in far-field output power of high power solid state lasers are variable due to thermal effect of optical pumping.
由于光泵浦热效应，高功率固体激光器的输出参数如光束远场发散角、输出功率等会发生变化。
His main interests are solid state lasers and their applications, DPSS laser new techniques, nonlinear optics techniques and laser properties research on new crystals.
主要从事固体激光技术及其应用、全固化激光新技术、非线性光学技术以及新材料激光特性的研究。
This article describes the advantages and applications of the diode pumped solid state lasers (DPSSL), especially its future applications to the powerful laser weapons and the laser fusion.
本文介绍了二极管泵浦固体激光器的优点及其应用，特别是它在强激光武器和激光聚变方面的应用前景。
The primary application for the diode laser bar is as a pump light source for use in solid-state lasers for medical and industrial applications.
半导体激光器主要用做医用和工业用固体激光器的光源泵。
Lasers are devices which amplify and produce beams of light which are very distance, directional, and pure in color. They can be solid state, gas, semiconductor, or liquid.
激光器是将光放大，产生光束的设备。它是一种距离远、直线性、单色光，它有固体、气体、半导体、液体。
So the high power solid-state lasers have a broad application prospects in the laser processing.
所以，高功率固体激光器在激光加工中有着很广泛的应用前景。
The other work is the theory study on the relaxation oscillation of solid-state lasers.
另一方面的工作是对固体激光器的弛豫振荡的理论研究。
The principle, application and exploratory development of semiconductor saturable absorption mirrors for passive Q-switching of solid-state lasers and fiber lasers are emphasized.
着重介绍了固体激光器和光纤激光器调q用半导体可饱和吸收镜的原理、研制方法及应用状况。
It has been shown, that the slab geometry solid-state lasers offer the possibility of achieving the kilowatt power level as well as having good beam quality.
分析表明，板条状几何结构固体激光器提供了达到千瓦级功率水平同时又保持良好光束质量的可能性。
Effect of thermal lensing is the main obstacle of getting high power and good beam quality in laser diode (LD)-pumped solid-state lasers.
在高功率激光二极管抽运固体激光器中，热效应已成为获得高输出功率和高光束质量的最大阻碍因素。
Inhomogeneous thermal power density and temperature distribution of inside-pumped solid-state tube lasers have been derived in this paper.
本文导出了内泵浦方式下管状固体激光器的非均匀发热量和温度分布。
The method can be applied to the wide band tuning of solid-state tunable lasers and optical amplifiers.
该方法可应用于固体可调谐激光器及光放大器的宽带调谐。
High power solid-state lasers could output laser which the wavelength in the IR could be transmitted by fiber, and the structure stability is good, the peak power is high.
高功率固体激光器可输出能用光纤传输的近红外波长的光束，且结构稳定性好，峰值功率高。
In this paper, a method for measuring thermally induced losses in highpower end-pumped solid-state lasers has been proposed.
本文提出了一种测量端面泵浦固体激光器热致损耗的方法。
The report emphases on face-pumped solid-state lasers(or slab solid-state lasers), diode laser pumped solid-state lasers and laser material processing.
面泵浦固体激光器（即板条式激光器）、半导体二极管泵浦固体激光器和激光加工是这份报告的重点。
The basic structure and the fundamental principle of semiconductor saturable absorption mirrors (SESAM) that are used for passive mode-locking solid-state lasers are introduced.
介绍了半导体可饱和吸收镜(SESAM)的基本结构及使用半导体可饱和吸收镜被动锁模固态激光器的基本原理。
The use of two-rod or multi-rod connection technology can effectively improve the solid-state lasers output power (energy).
而利用双棒或多棒串接技术能有效地提高固体激光器的输出功率(能量)。
The semiconductor diode array lasers are efficient, compact, all solid-state sources.
半导体二极管阵列激光器是高效、小型、全固态源。
As the best candidate for the high power lasers in next generation, the solid state heat capacity laser (SSHCL) has attracted extensive attention.
固体热容激光器(SSHCL)作为下一代最佳候选高功率激光器，引起人们广泛关注。
In this paper, some new developments of slab geometry solid-state lasers are reported and the comments on their prospects and problems are made.
本文报道了板条状几何结构固体激光器研究的一些新的进展，对板条激光器的前景和存在问题作了评述。
In recent years, much attention has been paid to the designing and operation of all-solid-state Raman lasers based on the stimulated Raman scattering (SRS) of crystals.
近年来，利用晶体材料的受激拉曼散射(SRS)效应建立的全固态拉曼激光器成为引人瞩目的亮点。
Because of the "Green problem", the applications of all-solid-state lasers is limited.
由于“绿光问题”的存在，使得全固态腔内倍频激光器的应用备受限制。
In this paper lamp pumping and diode pumping for solid-state lasers are compared. The different forms of pumping for different sorts of solid-state lasers are analyzed in details.
对固体激光器的灯泵浦和二极管泵浦方式进行了比较，详细分析了不同类型的固体激光器所适用的泵浦方式。
In this paper, misalignment sensitivity of resonators for slab solid-state lasers has been studied. Curves with sensitive change have been given also.
本文研究了板条状固体激光器光腔的失调灵敏度。给出了其相应的变化曲线。
Gentle zones were found in all output power curves of laser-diode (LD) side-pumped solid-state lasers.
在所有激光二极管(LD)侧面抽运的固体激光器的输出功率曲线中都存在一个平缓区域。
应用推荐