The numerical data including the width of solid bed and pressure fit well with those of experiments.
理论预测的固体床宽度和机筒压力与实验结果基本吻合。
Carrier solid bed is used as the main treatment unit to treat effluent of medium-small size tannery supplemented by high efficient coagulant.
采用载体固体床为主要处理单元，辅以高效混凝剂处理中小型制革综合废水。
This article analyzed the chemical and physical properties of biomass materials and their influence for the react process in a solid bed gasifier.
分析了生物质原料的化学和物理性质，指出了原料性质对固定床气化器中反应过程的影响。
The breakup point of solid bed using the results calculated from the penetration model and solid bed strength curves accorded with the actual situation.
研究表明，渗流对固体床强度具有削弱作用，固相破碎发生在固-液界面处。应用渗流模型计算得到的固相破碎点符合实际情况。
These expanded granular sludge bed (EGSB) reactors rely on the bacteria staying in the tank but high-solid waste would push them out.
这些膨胀颗粒污泥床（EGSB）反应容器依靠里面容纳的细菌，不过高固体含量的废弃物会把细菌排出容器。
The structures of the gas solid two phase flow in the suspension bed were measured by a particle dynamic analyzer (PDA) at different apparent velocities for each of the nozzle structures.
用颗粒动态分析仪(PDA)测量了悬浮床内气固两相流动的结构，确定了不同表观气速和不同进气结构条件下的两相流场的特点。
In this paper, a dynamic model of the gas-solid two phase flow in magnetically fluidized bed is established first.
本文首先从理论上建立了磁流化床气固两相流动的动力学模型。
Because of this rapid attainment of equilibrium it is not practical to measure the temperature difference between gas and solid at the bed exit.
由于达到平衡很快，故测定床层出口处的气体和固体温度差是不实际的。
The variation of gas holdup with gas velocity, column diameter, solid concentration, static bed height and gas distributor was studied in slurry bubble columns with three different diameters.
用三种不同直径的浆态鼓泡塔研究气速、塔径、固相浓度、静止床层高度和气体分布器等对气含率的影响。
Recovering deuterium from uranium deuteride bed by means of the isotopic exchange reaction between the solid and gas phases at room temperature is introduced.
研究了氢气经过流通式氘化铀床，利用气-固相之间的同位素交换反应回收床中的氘。
A biomembrane packed bed reactor with sulfur and limestone as solid filling material for removal of nitrate nitrogen was studied.
研究了装填固体填料硫和石灰石的生物膜反应器对水中硝酸盐氮的去除。
The oil is injected into the bed of fluidized coalite and cracks on contact with hot solid.
该油注于流化焦粉床层中，与热固体接触而裂解。
Our products are: large solid wood beds, solid wood bunk beds, and solid wood bed cluster.
所生产的产品有实木大床、实木双层床、实木子母床等。
The densification of the solid volume concentration in fluidized bed reactor and the kinetic action of forced stirring and upward water flow to the cluster granulation in fluidized bed are discussed.
本文分析讨论了流化床固体体积浓度的致密作用特点，以及流化床中强制搅拌和上升水流对结团造粒过程的动力作用。
The flow property of solid particle in flowing bed is a key factor affecting the efficiency.
固体颗粒在移动床内的流动特性是影响床层使用效率的一个关键性因素。
Theoretical analysis and experimental works have been carried out to study the solid particle attrition phenomena in a spouted-fluidized bed with a draft tube.
本文对导向喷动流化床中固体颗粒的破损进行了理论分析和实验测试。
In this paper, a solid phase material fire experimental bed, which has more slope segments, has been used to simulate upslope forest surface fire.
应用自行研制的“多坡段固相材料火蔓延实验台”，模拟森林地表火的蔓延过程，对变坡度情况下森林地表上坡火行为规律进行了实验研究。
The dissertation studies the characteristics of gas mixing and the gas-solid two phases flow in spouted-fluidization bed with experiment and numerical simulation methods.
本文通过采用实验和数值模拟的方法，研究了喷动流化床内气体混合特性以及床内气固两相的流动特性。
The experimental study of a gas solid flow pattern and gas diffusion characteristics using polystyol particles and glass bead has been carried out in a pressurized spouted fluidized bed.
在一个加压喷动流化床装置上进行了冷态实验，研究加压条件下床中的气固流动状态和气体在各部分的扩散特性。
In the study of heat transfer in CFB, most researchers focus on the heat transfer between the bed and the wall, few people attach importance to the gas-solid interfacial heat transfer.
在循环流化床内的传热研究方面，大多数研究者从事的是床层与换热表面之间的传热研究，而忽略了床中重要的气固两相间的传热。
A practical type of combined distributor used for solid-liquid circulating fluidized bed heat exchanger is introduced.
介绍了一种用于液固循环流化床换热器中的组合式固液分布器。
A vapor - liquid - solid three - phase circulating fluidized bed, which is a new type of evaporation boiling means, has been studied.
提出了一种新型蒸发沸腾传热方式，即汽液固三相循环流化床沸腾传热。
DEM (Discrete Element Method) is used to simulate the gas-solid flow of a two-dimension fluidized bed with L-type wind caps in this paper.
该文采用离散元素法DEM模型对二维L型定向风帽流化床中的气-固流动特性进行模拟。
It was found that the solid circulation rate , fountain height and bed pressure drop were all significantly influenced by the bypassing characteristics of the spouting gas.
发现喷动气的旁路现象对粒子循环速率、中心喷泉高度及床层压降都有显著影响。
Fluidized bed drier enjoys advantages of even solid particle mixing and large heat and mass transfer area of gas and solid phase.
流化床操作具有固体颗粒混合好，气固两相传热传质表面积大等优点。
In this paper, the two -phase flow behaviors of gas-solid circulating fluidized bed have been first studied by analysing experimental data.
本文首先从实验数据分析的角度揭示了气-固循环流化床的两相流动规律。
Flow behavior of liquid and solid phases was simulated in an inversed fluidized bed based on two-fluid two-phase flow model.
基于欧拉·欧拉双流体模型，数值模拟倒置液固流化床内液固两相流动行为。
The fluidized-bed heat exchanger within which the solid particles are kept in a fluidized condition by the fluid medium, so as to achieve a good heat transfer has a broad prospect for its application.
在流化床换热器中，固体颗粒在流化介质作用下保持流化状态，因此有着良好的传热性能，应用前景广阔。
By independently designing and making the separation equipment of the Liquid-solid fluidized bed, an open experimental system has been established.
通过自行设计和制作液固流化床分选设备，建立了初步的试验研究系统。
By independently designing and making the separation equipment of the Liquid-solid fluidized bed, an open experimental system has been established.
通过自行设计和制作液固流化床分选设备，建立了初步的试验研究系统。
应用推荐