The software design and realization of sub-module for project management system in configuration software is presented in this paper.
介绍了组态软件中项目管理器子模块的软件设计与实现。
Use-case realization sessions should produce a main output artifact; software development processes often suggest a design model composed of interaction and design class diagrams.
用例实现会议应该生成主要的输出工件，软件开发过程常常提出由交互和设计类图组成的设计模型。
Software elements can use UML and use case realization, an approach very similar to MDSD, but applied at the software design level, to create the technical design of the software.
软件元素能够使用UML和用例实现(一种同MDSD非常类似的方法，但是被应用于软件设计层级上)，创建软件的技术设计。
This article introduces solution selection, system design, hardware and software realization of combined automobile navigator.
本文介绍了组合车辆导航仪的方案选择、系统设计和硬软件的实现。
Then the design and realization of the control subsystems of hardware and software were discussed respectively.
接下来从硬件和软件两个方面重点讨论了数字硬盘录像控制子系统的设计和实现。
The paper focuses on the hardware design of vector signal processing module and the software realization of cross'spectral algorithm.
着重介绍了矢量信号处理模块的硬件设计以及互谱算法的软件实现。
The design of CAN bus hardware interface circuit based on SJA1000, the selection of chips, the design of software and the realization of CAN communication are expatiated.
论述了基于SJA1000的CAN总线的硬件接口电路的设计、芯片的选择、软件设计及CAN通信的实现。
This paper presents the realization on serial communication of AT89C52 SCM and PC, including hardware structure and software design.
本文介绍了AT 89 C52单片机与PC机之间串行通讯实现，包括硬件结构及软件设计。
The key techniques of this thesis are hardware design and software porting of wireless handheld unit and the realization of wireless communication.
本文的重点是无线点菜机的硬件设计和软件移植以及无线通信等关键技术的实现。
Based on basic theory of fuzzy control, the realization, design steps and software flowchart of fuzzy control on single-loop digital regulating instrument are introduced in this paper.
结合模糊控制的基本原理具体介绍了模糊控制在单回路数字调节仪表上的实现方法、设计步骤以及软件流程。
The paper introduced the overall design of system, described the system hardware, software and realization method.
介绍了系统的总体设计，论述了系统的硬件、软件及实现方法。
This dissertation studies the design and realization of a PC-based integrated software system for structure health monitoring.
本文主要研究了基于pc机的面向结构健康监测的集成软件系统的设计与实现。
At first, design and realization of programmable scheme logic software platform developed were primarily introduced.
本文首先着重介绍了可编程逻辑软件平台的设计和实现过程。
This paper Makes a deep research in the software and hardware realization of fault location system with radial feeders, stressing on the design of the hardware system and software programming scheme.
本文对基于“递进信息法”的配电网馈线故障定位系统的硬、软件实现进行了较深入的研究，重点设计了硬件系统和软件编程方案。
Working Process, structural principle, sensor selection and the design and realization of the hardware and software regarding the on-line time detecting system for watermark label are introduced.
介绍了水印标记在线实时检测系统的结构原理、工作过程以及传感器的选择、硬件和软件的设计与实现。
It describes the process of the design of the host software and the realization in detail, and introduces the key technology in the system.
本文以软件工程的理论为指导，详细阐述了航行数据记录仪主机软件的设计过程及实现并介绍了其中涉及的关键技术。
The design and realization of SOBFI, a software implemented fault injector is presented in this paper.
本文介绍了软件实现的故障注入工具SOBFI的设计和实现。
An emphasis on the system, the design of protocol and the realization of software of the serial port communication is detailedly discussed.
并对系统串行通讯体系、串口通讯协议的设计、串口通讯软件实现等方面进行了论述。
The software carried on the transmission protocol realization, the instrument remote control and the system software design, so connected the ethernet to made up the embedded network instrument.
软件方面进行了传送协议实现、仪器远程控制和系统软件的设计，接入以太网，组成嵌入式网络仪器。
This thesis introduces the hardware design and the software realization for the intelligent circuit breaker on the central of microprocessor 80c196kc.
本文介绍以80c196 KC单片机为核心的智能型断路器的硬件设计和软件实现。
The paper introduces structure of wireless data transmission system, and expounds realization of hardware design circuit and software of DTU based on C8051F020 microprocessor and CDMA module MG801A.
对无线数据传输系统的构成进行了研究，阐述了基于C8051F 020微处理器和CD MA模块MG801A的数据终端的硬件设计电路和软件接口的实现。
A new extensible multi-function vehicle terminal system is designed, and the software and hardware design and realization method are also introduced.
该文提出一种新型的多功能可扩展车载终端系统的设计方案，介绍了系统的硬件和软件设计以及实现方法。
With the platform of VS. NET, the design of software system and engineering realization methods are studied.
NET为开发平台，研究了软件系统设计与工程实现方法。
The functions and characters of the system, and the equipment configures are described. The realization process of design and hardware and software functions is expounded.
叙述了该系统的功能、特点以及开发该系统应考虑的设备配置等问题，并详细阐述了该系统的设计方案和硬软件功能的实现过程。
This paper also introduces the design and realization of some main interface circuits, finally the software design for the two kinds of output modes are described.
介绍了该装置中几个主要接口电路的设计与具体实现，并讨论了文本和绘图两种输出方式的软件实现方法。
At node design aspect, this pa-per analyzed how to select communication elements and transmission medium in hardware design and discussed control strategy realization in software design.
对节点硬件设计中的通信器件与传输介质选取进行了分析，并探讨了控制策略在软件设计中的实现。
The Paper also describes the wireless intelligence modem hardware and the software design and the realization based on GPS, CDMA and WLAN protocols, as well as related function.
描述基于GPS，CDMA和WLAN的无线智能调制解调器的硬件及软件的设计与实现，以及相关功能。
The Paper also describes the wireless intelligence modem hardware and the software design and the realization based on GPS, CDMA and WLAN protocols, as well as related function.
描述基于GPS，CDMA和WLAN的无线智能调制解调器的硬件及软件的设计与实现，以及相关功能。
应用推荐