The features and applicable areas of software PLC based on PC platform and module inserted PLC are presented.
介绍了基于PC平台的软件PLC和插卡式PLC的特点和应用场合。
The working principle and hardware configuration of the system, calibration of SIWAREX u, and PLC software were introduced.
描述了系统工作原理,给出了系统的硬件配置、SIWAREX U校正以及PLC软件设计。
The application of PLC in the control system of platform booms, the hardware and software design method of PLC control system are presented and discussed.
介绍了PLC在舞台吊杆控制系统中的应用,以及PLC控制系统的硬件和软件的设计方法。
Air compressor constant pressure gas supply intelligence control system is by the transducer, pressure sensor, programmable controller (PLC) control unit, software control unit etc.
空气压缩机恒压供气智能控制系统是由变频器、压力传感器、可编程控制器(PLC)控制单元、软件控制单元等组成。
The technology process and the control demands of a waste water pump are presented, and the design of hardware and software based on PLC for the pump station automatic control are described.
介绍了一个污水泵站的控制工艺和控制要求,阐述了泵站自动控制系统中plc的硬件、软件设计。
The new serial communication software between PLC and EPC was designed, which is convenient to set the welding parameters and collect temperature.
通过软件改进设计,实现工控机与PLC串行通信,以方便参数的设定和温度采集;
Application of OMRON CPM1A series PLC in solar water heater automatic control system is mainly introduced, emphasises on the system hardware constitution and the system software design process.
主要介绍了OMRON公司的CPM1A系列在太阳能热水器自动控制系统中的应用,重点阐述了系统的硬件构成及系统软件的设计过程。
The system construction, PLC configuration and software design for chemical feed water treatment are researched and summarized.
着重从化学给水的系统结构到PLC的组态和软件设计等方面做了研究和总结。
This paper presents the method of pipeline cleaning by high pressure water by PLC from hardware and software.
本文从硬件构成和软件分析两方面描述了利用PLC对油管进行高压水射流清洗的实现方法。
This paper discusses the hardware configuration and the PLC software design in the electrical control system of a piston ring profile lathing and milling combined machine tool.
本文对活塞环仿形车、铣组合机床电气控制系统中硬件配置及PLC的软件设计特点进行了探讨。
The authors describe the constituent of hydraulic control system and the design of PLC software for some large roller hearth furnace with PLCs as its control centre for annealing bearing RACES.
叙述了某大型辊底式炉在轴承套圈余热退火过程中,采用可编程控制器(PLC)作为控制核心,自动进行工作的机械液压传动控制系统的组成、PLC软件设计及编制。
In rotation tools set of CNC, to select tool by PLC software can realize tool exchange at random and high speed.
对数控机床中的旋转刀库,采用PLC软件选刀,可实现随机快速换刀。
The hardware configuration of the automatic control system for disc pressure filters by PLC technique and its software designing method are described.
概述了用PLC技术对盘式压滤机自动控制系统硬件的配置及软件的设计方法。
At present, remote PLC Virtual control system based on industry configuration software still has not concrete application in teaching.
目前基于工业组态软件的远程PLC虚拟控制系统在教学上尚无具体的应用。
Furthermore, this paper gives detailed discussions on the control system, hardware configuration and software design, and provides the PLC modular diagram and the program design flow chart.
对系统的控制功能、硬件配置和软件设计进行了讨论,提供了PLC模块配置图,给出了程序设计流程。
The specification of programmable controller, PLC hardware configuration, software design, programmer, operation mode and furnace purging flame detection and it principle are presented concretely.
具体介绍了可编程序控制器性能指标,PLC硬件配置,软件设计,编程器,操作方式以及炉膛吹扫,火焰检测及火检原理等。
The plan of virtual PLC system is brought forward based on configuration software MCGS.
在组态软件MCGS的基础上,作者研究提出了虚拟PLC系统的方案。
The article introduces the electrical control of Z3040 radial drill with PLC and explains the hardware and software design of the system.
文章介绍了用PLC对Z 3040摇臂钻床实行电气控制的方法,并对该系统的硬件组成和软件设计作了阐述。
To guarantee the hoist safety running, several logic judgment and control methods are used in PLC software, besides hardware protection.
在硬件上除采用各种措施使系统能可靠工作外,在软件上也采用多种逻辑判断和控制的方法,以保证起升的安全。
The features of structure and the design of software for programmable logic controller (PLC) are introduced in detail.
着重介绍了可编程控制器(plc)的结构特点和软件设计。
Based on PLC and PLC's Programmed instruction, a practical software method filtering out some complicated disturbance from analog signal is presented.
提出了一种基于PLC及其编程指令从模拟信号中滤除复杂干扰的实用软件方法。
The working process of cut tobacco feeding, the air circuit and software (design) of the control system, the input and output connections of PLC were introduced.
介绍了烟丝喂入的工作过程,对于该系统的气路系统、PLC输入和输出接线以及软件设计进行了论述。
The application of PLC in cut tobacco drying process is presented. The hardware configuration and software design of the system are focused.
介绍PLC控制在烟丝烘干过程中的应用,较详细地叙述了系统的硬件配置和软件设计。
A basis model for managing automobile production line based on PLC is proposed with the introduction of hardware configuration, controlling pattern and application software.
通过对这一管理系统的硬件结构、控制方式、应用软件的介绍,给出基于PLC进行汽车生产线管理的基本模式。
The application of PLC in cut tobacco drying process is presented. The hardware configuration and software design of the system are focused. The operation shows excellent result.
介绍PLC控制在烟丝烘干过程中的应用,较详细地叙述了系统的硬件配置和软件设计。投入运行结果表明效果良好。
The control principle of the vacuum freeze drier with a computer and PLC is introduced, and the composition of the hardware and software are presented.
介绍了用计算机和可编程序控制器(PLC)对真空冷冻干燥机控制的原理,以及硬件和软件的组成。
PLC samples the remanence voltage of generator and measures its period with software to get the signal of fire speed.
PLC采样发电机的剩磁电压,通过软件编程测取剩磁电压的周期,来获得原动机的点火转速信号。
This paper mainly introduces the working principle of IPC based built in PLC and some of the design and developing methods of the key software.
本文主要介绍基于IPC的嵌入式可编程控制器工作原理和一些关键软件的设计与开发。
This paper introduced the application of PLC in the centralized station of providing cold, among which control principle, structure of network and software are discussed.
本文介绍了PLC在地铁集中供冷站监控系统中的应用,主要阐述监控系统的控制原理、网络结构及软件结构。
This paper introduced the application of PLC in the centralized station of providing cold, among which control principle, structure of network and software are discussed.
本文介绍了PLC在地铁集中供冷站监控系统中的应用,主要阐述监控系统的控制原理、网络结构及软件结构。
应用推荐