This paper presents a kind of training system of tank fire basic exercises based on CAN bus. The overall design, hardware configuration and software functions are discussed in details.
本文介绍了一种基于CAN总线的坦克射击基础练习训练系统，并对系统的总体设计、硬件配置和软件功能进行了具体分析。
And the specific hardware system structure, control slug and the design of drive software and the transmission performance of PCI bus for nuclear spectrometry were also set forth.
并对PCI总线在氡室检测系统中的具体硬件系统结构、控制芯片与驱动软件设计，与PCI总线对核谱转换的传输性能作了阐述。
This paper introduces the control system of elevator based on CAN bus, analyses its hardware and software and provides hardware design and flow chat.
本文介绍基于CAN总线的电梯控制系统，并对总体方案、软硬件设计作了分析，给出了具体设计电路以及软件流程图。
Based on the analysis of principle of Universal Serial Bus, this paper discusses the developing technology of hardware and software about USB testing system.
在分析usb通用串行总线工作原理的基础上，讨论了USB测试系统中有关的硬件和软件开发技术。
This paper proposes a structure of on-board system software based on software bus, for the poor reconfiguration of on-board system software at home and board at present.
针对目前国内外星载系统软件可重构性较差的问题，提出了一种基于软件总线的星载系统软件结构。
The hardware structure and the software function of a ship's engine room simulation and monitoring alarm system based on CAN field bus in the laboratory were described.
从硬件结构和软件功能上描述了采用CAN现场总线技术构成的机舱实验室模拟监视报警系统及其实现的功能。
This article provides the hardware structure of CAN Bus system, the software designing method and the making strategy of CAN application layer protocol in HEV.
给出了混合电动轿车CAN总线系统的硬件结构、软件设计方法，以及混合电动轿车CAN应用层协议的制定策略。
The application of CAN BUS controller in milling machine was described, the design of hardware and software in driving control system was introduced.
介绍了CAN总线控制器在铣刨机系统中的应用，同时介绍了其行走控制系统的硬件、软件设计。
The paper introduces application of STD Bus microcomputer in detection system for temperature of axle by using infrared sensor, and gives the system block diagram of hardware and software.
本文介绍了STD总线在红外轴温检测系统中的应用情况，给出了红外轴温检测系统的硬件组成和软件的设计框图。
A smart information transmission system in residence based on bus technology was designed, and the design of its hardware and software were emphatically analyzed.
设计了基于总线技术的住宅内智能信息传输系统，着重分析了其硬件、软件部分的设计。
The article describes a CAN bus system which has been successfully used in the Fuel Cell Car drive system and analyses its hardware construction and software design.
本文介绍了成功应用于燃料电池轿车动力系统上的CAN总线控制系统，并对CAN总线的硬件结构和软件设计做了详细的分析。
The field bus control system was used in the process of oil refining. This system solution was designed and the application software development to this control system was described.
介绍炼油装置生产过程中现场总线控制系统应用，以及控制系统总体设计、控制系统应用软件开发。
The paper aims at the problems of steering linkage with transition pitman arm of a bus, uses system dynamics software ADAMS to check and find out the problems, and then improves the design.
针对某款客车带有转向中间臂的转向杆系出现的问题，利用系统动力学分析软件ADAMS进行分析，找出问题并进行设计改进。
This article introduces the research of the technique of automatic checkout system of passenger traffic on bus, and the establishment of corresponding software mathematical model.
对客车的旅客运输量自动检测系统技术进行了研究，建立了与之相适应的软件数学模型。
Presents a functional test based universal bus emulation test system, and a detailed introduction of its hardware and software system is presented.
提出了一种基于功能测试的可编程通用总线仿真测试系统，并对其硬件和软件系统的组成原理和功能做了详细的介绍。
The software "the bus line schedule and assessment system" is a practical one, which operates fast, efficiently and easy with a friendly Chinese interface.
《公交车线路营运的调度和评估系统》软件是一个功能强、运算速度快、具有友好中文界面、操作简便、真正能够应用于实际的实用性软件。
CAN bus and its specialties are introduced in this paper. The design included software and hardware for supervisory system of switchgear parameters based on the bus is explained.
本文介绍了一种新型的现场总线—CAN总线，说明了其特点。基于该总线设计了开关柜参数监测系统，包括了软、硬件的设计。
It introduces how to design a PCB board of high speed data transmitting system based on PCI part bus, including the discussing of hardware agreement and software agreement.
文章介绍了如何通过PCI局部总线实现高速的数据传送，即介绍了对PC I接口板的开发介绍，其中包括它的硬件协议和软件协议的讨论。
The paler amply introduces composing and advantages, and currently disadvantages of field- bus control system FCS from hardware, and software and application in the plant.
结合合成氨厂实践情况，从硬件、软件的角度介绍现场总线控制系统FCS的组成、优点及目前存在的不足。
To meet the demands of heat engineering automation control in power plants, a new distributed control system based on field bus is developed by adopting the latest software and hardware techniques.
采用最新的软、硬件技术，充分考虑火电厂热工自动控制应用的需要，开发了基于现场总线的新一代分散控制系统。
This article presents the design of an evaporator system for use with winding plating equipment based on CAN bus, including its hardware structure chip choice and the design of software.
介绍了基于CAN总线的卷绕式镀膜机蒸镀系统的设计方法，阐述了系统设计的硬件及其芯片选用并介绍了软件设计方法。
According to the typical application of the distributed control system in robot, the application layer protocol of CAN bus with corresponding software was presented.
结合分布式控制系统在机器人控制中的典型应用，设计了CAN应用层协议和相应的通信软件。
CAN bus, HMI, together with special communication ports and special debug software are adopted to make whole system digital and intelligent.
采用HMI人机界面、专用通讯接口及调试软件等使整套装置实现数字化、智能化。
The composition, function, use , software design and key technology of MIL-STD-1553B data bus integration test system are described.
阐述了MIL-STD-1553B总线综合测试系统的组成、功能、用途、软件设计和关键技术问题。
The characteristics and structure of braking energy regenerative system of city bus are introduced, and the hardware circuit of the controller and related software are designed.
介绍了公共汽车制动能量再生系统的特点及组成，对控制器的硬件电路及软件进行了设计。
The monitor software based on fieldbus is designed for drilling parameter measurement and it applies the HART and CAN bus to the drilling system.
本论文基于现场总线技术开发了钻井参数测量的监测软件，将HART、CAN现场总线技术应用于钻井测量系统。
It described the temperature patrol measurement system based on 1-wire bus composed of DS18B20 and AT89C2051 and its system hardware structure and software design.
阐述了基于单总线的采用DS18B20和AT 89 C 2051单片机组成的温度巡检系统，及其系统硬件构成、软件设计流程。
This Paper discusses the system design of virtual micro-oscilloscope based on USB bus from hardware and software, emphasizes the design ideas of system and its rules in detail.
该文从硬件系统和软件系统两方面对基于USB总线的微型虚拟示波器系统设计作了详细论述，着重探讨了系统设计思想及相关注意事项。
This Paper discusses the system design of virtual micro-oscilloscope based on USB bus from hardware and software, emphasizes the design ideas of system and its rules in detail.
该文从硬件系统和软件系统两方面对基于USB总线的微型虚拟示波器系统设计作了详细论述，着重探讨了系统设计思想及相关注意事项。
应用推荐