The behaviour of the vanadium bearing slag in smelting process has been discussed.
讨论了含钒转炉渣在炼钢过程中的行为。
Steel is an alloy of iron and carbon. Coking coal is a source of carbon in the smelting process.
钢是铁与碳的合金，焦煤便是熔炼过程中碳的来源。
The product is block or particles, which can reduce dust pollution during smelting process.
产品为块状或颗粒状，可减少冶炼过程中的粉尘污染。
The oxygen autogenous smelting process of nickeliferous copper concentrate from Jinchuan Nonferrous Corp.
对金川二次铜精矿氧气自热熔炼过程进行热力学分析。
The oxygen autogenous smelting process can be successfully conducted by adoption some suggested measures.
通过采取相应的措施可使熔炼过程顺利进行。
This smelting process is continual and stable, the production cost is reduced and Al recovery is increased.
该方法熔炼过程持续稳定，可降低成本，提高铝的回收率。
Probing into the complexity of BF metal-smelting process is a key factor to realizing the automatic control.
因此，关于复杂性的探析是实现高炉冶炼过程自动控制的关键因素。
The softening point of sinter is a key factor that affects the smelting process of Imperial smelting Furnace (ISF).
烧结块软化点是影响密闭鼓风炉熔炼过程的一个关键因素。
The effects of the main alloying elements on properties of ZLD11 alloy, as well as the smelting process are introduced.
介绍了ZLD11铝合金中元素的性质及作用，ZLD11铝合金的熔炼方法。
The Chatacteristics of Contop Smelting Process for cyclone furnace is discussed and make a comparison with silver furnace.
着重阐述了旋涡炉顶吹炼铜工艺技术特点，并与白银炉工艺指标进行对比。
Teck produces refined silver and gold dore in British Columbia. Precious metals are co-products of the lead smelting process.
泰克在不列颠哥伦比亚省产成品金银金锭。贵金属是铅冶炼工艺的副产品。(中国进出口网)。
The effects of various operating variables on smelting process in blast furnace were discussed using the energy management system .
利用这个系统，讨论了各项操作变量对高炉冶炼过程的影响。
So, the key to promote the application of Mg-Li alloys is to develop a new smelting process and enhance their mechanical properties.
因此，完善镁锂合金的熔铸工艺并进一步提高其力学性能，已成为拓展镁锂合金应用领域的关键。
So, the key way to promote the application of Mg-Li alloys is to develop new smelting process and enhance the mechanical properties.
因此，完善镁锂合金的熔铸工艺并进一步提高其力学性能，已成为拓展镁锂合金应用领域的关键。
Multiphase equilibrium mathematical model for the copper flash smelting process is established based on the Gibbs principle of minimum free energy.
基于吉布斯最小自由能原理，建立了铜闪速熔炼过程的多相平衡数学模型。
The effect of Sb cycling in Sn smelting process has been pointed out, and the advice of comprehensive recovery of antimony has also been put forward.
指出了锑在锡冶炼流程中大量循环对生产的影响，提出了综合回收有价金属锑的初步建议。
This and the lower production of bulk concentrates containing significant amounts of lead led to abandoning more and more the Imperial Smelting process.
因此，并且随着含有大量铅的精矿产量的减少，帝国熔炼工艺越来越少应用。
The traditional sintering blast furnace lead smelting process has been faced with increasing challenges as the demand for environmental protection grows.
传统的烧结-鼓风炉炼铅法面临环保要求日趋严格的挑战。
It also points out that the factors affecting smelting process are un- der the follows, such as, grain size of raw material, burden weighing and mixing etc.
并提出了影响铁合金冶炼过程有原料的粒度，配料称量，混合等重要因素。
The intensification and optimization of the copper smelting process in flash furnace are investigated by using of the "high efficiency reaction core" model.
运用闪速炉反应塔“高效反应区”模型，研究闪速炉操作的优化与强化。
The article, taking NCC software used in copper flash smelting process as the example, introduces its development, definition, function and practical example.
本文以铜闪速冶金NCC软件为例，介绍了其研发过程及定义、功能、应用实例。
The smelting process was strengthened by using high top pressure, high pressure drop, large blowing rate, reduced tuyere section and enhanced blasting velocity.
采取高顶压、高压差、大风量、缩小风口直径、提高风速和鼓风动能等措施进一步强化冶炼；
Measurement of guarding the france and increasing the production in strengthening smelting process of pig iron BF at ferroalloys plant of Xinsteel are expounded.
文章阐述了新钢公司铁合金厂生铁高炉强化冶炼过程中的做法，出现的问题和护炉保产措施。
The result of this study reveals that REE are concentrated in slag mainly during the smelting process, and total content of REE in the copper ingots is very low.
结果发现稀土元素在铜矿冶炼过程主要富集在炼渣中，金属铜中的稀土元素含量很低。
It shows that the main causes of lining wear in ferro - chrome smelting process are the chemical erosion by early slag and the thermal effect at high temperature.
指出在冶炼过程中炉衬遭损坏的主要原因是初渣的化学侵蚀和精炼期的高温热作用。
In order to reduce the reagent cost of the basic lead-smelting process, a series of experiments for the recovery of alkali and silver from the slag was carried out.
为了降低碱性炼铅法的试剂成本，对其碱浮渣的回收利用工艺进行了初步试验研究。
These processes include:oxygen-flame smelting process, the Vanyukov smelting process, smelting in a stationary unit with top blowing and smelting in a tilting furnace.
这些工艺包括氧焰熔炼工艺、瓦纽科夫熔炼工艺、固定式顶吹炉熔炼工艺和可倾炉熔炼工艺。
Combining the mechanism analysis with Fuzzy Clustering technique, an optimization and decision-making model about operating parameters in the ISF smelting process is built.
最后基于机理分析和模糊聚类技术建立了密闭鼓风炉过程操作参数优化决策模型。
Combining the mechanism analysis with Fuzzy Clustering technique, an optimization and decision-making model about operating parameters in the ISF smelting process is built.
最后基于机理分析和模糊聚类技术建立了密闭鼓风炉过程操作参数优化决策模型。
应用推荐