In this paper, pressure distribution of gaseous slip flow in parallel plates microchannel was studied.
对平行平板微型槽中气体滑移流动的压强分布特性进行了研究。
The results show that the orthonormal function method is available to study the slip flow characteristics in the triangular microchannel.
计算结果表明：正交函数法适用于三角形微槽内滑移流动特性的分析计算；
Stick-slip flow is a jerky movement of compacted grains with velocity of particles at the walls slightly lower than in the rod like core.
粘附滑移流动是一种密集颗粒的急跳式的运动，在壁面处，颗粒的速度稍低于呈杆状的中心的速度。
Questions about the measurement of pressure distribution on the wing by using thin pressure belts and the effect of slip flow on pressure distribution are discussed.
对用测压带法进行机翼压力分布测量及滑流对压力分布的影响等问题进行了讨论。
Once you get used to it, and to the particular person you're pairing with, you slip into a flow, switching back and forth naturally.
一旦您习惯了这种做法，并且适应了与您结对的特定人员，您就会进入这种流程，很自然地来回互换角色。
And since the flow of communication never ends, you slip into a life of what I have come to call "reactionary workflow."
且既然消息总是源源不断的，你将陷入一种我称之为“反应式的工作流”的生活当中。
The last, through experiments of flume and water tunnel, the liquid slip effect on drag-reduction over super -hydrophobic surface for various flow conditions was researched.
通过水槽和水洞的实验，研究了超疏水性表面在不同流动条件下的减阻特性。
The effects of the temperature jump and the velocity slip on the heat transfer for the slip-flow regime in the cold trap of the freeze dryer are considered.
对真空冷阱中处于滑流区的气体换热，应考虑温度跳跃和速度滑移对换热的影响。
This paper sums the study results on wall slip of polymer melt in shear flow, which leads to the physical meaning of the developed Z-W model.
总结了聚合物熔体在剪切流场壁面滑移研究的成果，提出了Z W模型的物理概念。
Based on the analyses of wall slip mechanism of polymer melt flowing, the effects of wall slip on melt filling flow behavior in micro injection molding were investigated.
分析了微尺度下熔体壁面滑移机理，研究了微注塑成形中壁面滑移对熔体充模流动行为的影响。
Two dimensional numerical simulation is presented for flow and heat transfer in rectangular microchannel with uniform wall temperature in slip regime.
在等壁温边界条件下对矩形微细通道速度滑移区的对流换热进行了二维数值模拟。
Squeeze flow between two parallel disks is considered for small gaps for rigid-plastic material with partial wall slip.
研究了存在壁面滑移时两刚性圆盘间刚塑性介质的挤压流动。
In this paper, the authors analyze the vertical settlement effects of the solid-phase by the slip movements between phases based on the two-phase flow theory and the sediment kinetic theory.
本文基于两相流和泥沙运动力学理论，利用相间滑移考虑固相泥沙的重力沉降效应。
The deforming force of cone-die direct extrusion is solved by a mathematic method based on the simplified flow model of slip line field.
基于滑移线场的简化流动模型，运用数学方法求解出了一种锥形模正挤压变形力的最佳上限解，并将该上限解用通用解析式表达出来。
The paper also discussed the technological basis of the machine, including flow and deformation of the metal, the problem of slip, rolling force and torgue, and conditions affecting roll-bite.
文中着重阐述了新延伸机的工艺理论，即金属变形和流动、滑移问题、轧制力参数以及咬入条件等。
The numerical results comprehensively describe the influence of the slip boundary condition on mass flow rate.
数值分析结果给出了速度滑移边界条件对管道质量流量的影响。
Then, the diagnosis algorithms for solving stick-slip, deadzone, jam, bias faults are discussed in detail based on analyzing the command, feedback and flow signals from the model.
通过对模型中指令、反馈和流量信号的分析，得出了执行器在粘滞-滑动、死区、卡死、恒偏差故障下的诊断算法；
Rainwater infiltration, one of main factors inducing rock slope to slip, changes distribution of seepage flow field in unsaturated zone of slope.
雨水入渗改变了岩质边坡非饱和区渗流场的分布，是引发边坡滑坡的主要因素之一。
The newly-added interface slip model takes this into account improving accuracy and stability of the flow solution.
那崭新-附加的介面转差模型进入改良精确度和流量解决的稳定度的帐户之内轮流这。
When the total cycle pump gear shift operation, the flow of the slip road ratio unchanged.
当总循环泵变速运行时，各个支路的流量分配比例保持不变。
The slip coefficient B is introduced in momentum equation of one dimensional nucleating flow.
本文在一元蒸汽凝结流动量方程中引入了滑移系数B，考虑两相滑移的影响。
Squeeze flow between two parallel disks is considered for rigid-plastic materials with partial wall slip.
两平行刚性圆盘挤压理想刚塑性介质时，通常考虑圆盘与介质的界面之间存在部分滑移。
The expressions for the volume flow rate and thickness of enamel slip film flowing along an inclined plane have been obtained.
根据运动方程，求得釉浆在搪瓷制品的倾斜平面上薄膜流动方程，以及搪瓷釉浆流变特性参数对薄膜流动的影响。
The study indicates that the flow rule has small influence on the stability of the slope without restriction; however, the critical slip surface may be different.
研究结果表明，对于无约束的天然边坡，自重作用下其安全系数受流动法则的影响较小，而滑裂面的位置随流动法则的不同而不同；
To start the flow of oxygen, pull the mask towards you. Place the mask over your nose and mouth, slip the elastic strap over your head, tighten it by pulling the end of the strap.
氧气面罩落下后，请用力向下拉，罩在口鼻处，将带子套在头上，可通过带子调节松紧。
To start the flow of oxygen, pull the mask towards you. Place the mask over your nose and mouth, slip the elastic strap over your head, tighten it by pulling the end of the strap.
氧气面罩落下后，请用力向下拉，罩在口鼻处，将带子套在头上，可通过带子调节松紧。
应用推荐