During the producing process of slab caster, secondary cooling system is a very important factor which influences slab quality.
在板坯铸机的生产过程中，二次冷却制度是影响铸坯质量的重要因素。
Initializing the slab allocator and creating slab caches for VFS, buffer cache, etc.
初始化slab分配器并为VFS、缓冲区高速缓存等创建slab高速缓存。
The "4 + x" toe slab design concept makes toe slab design and foundation excavation easy and economy, so, it is more scientific and reasonable.
采用“4 +X”的趾板设计思想，趾板的设计和基础开挖灵活经济，因此更为科学合理。
Post tensioned prestressed concrete hollow slab(PTPCHS) is one of high strength prestressed concrete hollow slab, and its construction performance is still unknown yet.
后张预应力混凝土空心板是一种高效预应力空心板，目前国内尚未对其结构性能进行系统研究。
Ceramsite concrete sandwich floor slab is a type of composite floor slab, which is made of profiled sheet and ceramsite concrete.
陶粒混凝土夹芯楼板是一种压型钢板与陶粒混凝土的组合楼板，其空腹部分采用聚苯乙烯板填充，是一种新型轻质节能板材。
This paper states several causations of slab crack in precast slab slot and puts forward relevant prevention measurements.
本文论述了预制楼板板缝开裂的几种原因，并针对其原因提出了相应的防治措施。
At the same time, accurate prediction of time meets the need of slab rolling production line, and slab has better heating quality and fuel consumption is lower.
同时准确的时间预测既保证了轧线对板坯产量的需求，又保证了板坯有较好的加热质量和较低的燃耗。
The article expounds the results of the destruction test on reinforced concrete slab under moving wheels and the mechanism of slab destruction.
本文叙述了在移动车轮作用下钢筋混凝土板的破坏试验结果和实际板的破坏机理。
The slab quality was the key to the research of thin slab continuous casting and rolling process.
铸坯质量问题是薄板坯连铸连轧工艺研究的核心问题。
The distinguishing features of the paper are selection of oblique strip and loading transmission, negative yielding line in irregular slab with simple supports, point support and shear split of slab.
本文的主要特点为有料向板条的选取及荷载传递、简支不规则板的负弯矩裂缝线以及点支承板条和板的剪切劈裂问题。
Then, the concrete slab is divided into several layers and the relationships between the nodal forces and displacements of each layer slab are established.
然后将混凝土板分成若干层，建立起每层板节点力与节点位移之间的关系。
According to the mechanism of the slab caster, an on line oscillation monitoring system of the slab caster mold has been designed and realized.
根据板坯连铸机的运行机理，设计实现了结晶器振动状态在线监测系统。
Seepage control in dam, design of freezing resistance for concrete face slab, new caulking water sealing material and surface coat on face slab are mainly presented.
本文重点介绍坝体渗流控制，混凝土面板抗冻设计，及新型嵌缝止水材料，面板表面涂料的研究。
This paper researches the plane stiffness of new composite structure for slab on the lower flange, which is compared with the traditional structure for the slab on the top flange.
本文研究了将楼板置于钢梁下翼缘的新型组合结构平面刚度，并和传统的将楼板置于钢梁上翼缘的结构形式的平面刚度和极限承载力作了比较。
However, the difference is that the continuous composite slab can carry further substantial load even after the shear slip initiation as against the simply supported slab.
但与简支组合板不同的是，连续组合板端部出现滑移后，其极限承载能力明显高于相同跨度简支板极限承载力。
In order to reduce the inclusion quantity in the stainless steel slab, water-modeling experiment of stainless steel slab continuous casting tundish is launched.
为减少不锈钢连铸坯中夹杂物的数量，开展了不锈钢板坯连铸中包水模实验。
This paper discusses some effect of vehicle load on slab and beam and presents the design process of beam and slab on the basis of studying the vehicle queues and the design of concrete beam and slab.
在探讨汽车车队的排队、混凝土楼板设计的基础上，研究汽车荷载对板、梁的影响，并给出梁与板的设计过程。
Producing continuous casting slab without defect is precondition to hot delivery and charging continuous casting slab.
生产无缺陷的连铸坯是连铸坯热送、热装的前提条件。
When the frame beam works under torsional moment, extra bending moment is to be produced in the reinforce slab because the frame beam and the reinforce slab work together.
由于现浇框架梁板共同工作，当梁受扭时，板中必然产生附加弯距，同时板也约束了梁的转动。
When the width is very close to or much greater than the span of slab arch bridge, it is called Super-wide slab arch bridge.
当板拱桥的宽度与跨度接近，甚至其宽度大于跨度，这类板拱桥称为宽体板拱桥。
The deformation not only reflects the flexure behavior of slab at every loading stage, but also affects the stress status on the surface of punching shear cone and the ultimate capacity of the slab.
该变形反映了板在各个受力阶段的抗弯性能，也在很大程度上直接影响着冲切锥面上的应力分布和板的抗冲切能力。
In this paper, the finite element method is used to analyze the behavior of the prestressed V-shape slab Roof structure, especially the effect of temperature change on the stress of slab.
采用有限元法对雁形板屋盖结构的空间受力特性进行了分析计算，并着重考虑了温度变化对板截面应力的影响。
Measured properties are slab position, edge profile, slab width (in multiple points) and slab edge thickness.
测量内容包括：板坯位置、边部轮廓、板坯宽度(多点测量)、板坯边缘厚度。
According to the principle of equivalent rigidity, the slab is analogic to closely spaced beams, and the loads upon the slab can be transformed to equivalent nodes load of beams.
根据刚度等效的原则，将板等代为正交密肋体系，板上荷载转化为等效节点荷载，可利用通用结构分析软件对受复杂荷载作用的板作精确分析。
Presently, calculation method of a reinforced concrete isosceles trapezoid slab is experiential arithmetic with which the isosceles trapezoid slab is simplified into an equivalent rectangled slab.
目前，在均布荷载作用下，计算钢筋混凝土周边固支等腰梯形板通常是用经验算法即是把钢筋混凝土等腰梯形板简化成当量矩形板进行计算。
The mathematical model of slab stayed bridge for dynamic analysis is discussed with a railway slab stayed bridge project as an example.
以某铁路斜拉板桥方案为例，探讨斜拉板桥的动力分析模型。
Using above-mentioned model to solve composite slab, strain of concrete and profiled steel deck, deflection, slide and bearing capacity of composite slab are analyzed.
利用以上模型对组合板进行有限元计算，分析了压型钢板及混凝土的应变、组合板挠度、滑移以及承载力随荷载及跨度的变化规律。
T he relation of the four parameters with initial slab thickness, initial slab width, width reduction and edger roll diameter was obtained and a new mathematical model was accomplished as well.
得出表征立轧时轧件断面特征的四个参量与侧压量、立辊直径、板坯来料厚度及宽度间的关系，并建立了新的数学模型。
Some defects have been found in the slab structure by comparison with normal slab in microstructure through microcosmic test.
通过低倍及微观检验观察，将发生低温开裂的铸坯与正常铸坯进行微观组织对比，找出铸态组织中存在的缺陷。
Some useful conclusions will be gained by comparing the span, section format, slab highness and construction mode of rein-forced concrete continued slab bridge.
通过对钢筋混凝土连续板桥的跨径、截面形式、梁高、施工方式的比较，得出一些有用的结论。
应用推荐