The shielded rectangular cross section slab line with cylindrical inner conductors is of great importance to microwave engineering and design.
由多根圆柱内导体和矩形外导体所组成的屏蔽矩形板线是电磁工程中一类重要的传输线。
When the distance between the axis of the inner conductor and the bottom of the trough tends to infinity, the results obtained in this paper go into that of the well-known slab line.
当此槽形线底部与中心圆柱的轴线间的距离趋于无限大时，我们即得到人的所熟知的两平板间具有中心内导体的传输线的结果。
The energy law of yield line theory was applied to the theory of "resistance unit" of flat slab strengthening analysis.
屈服线理论能量法用于无梁板加固分析的“抗力单元”理论、该理论应用于加固分析的可行性。
In this paper the practical theory and calculation formulas of skew slab reinforcement are developed based on Yield-Line theory. They Can be used as reference by designers.
本文在屈服线理论的基础上提出了斜板配筋的实用理论和计算公式，可供设计参考。
The distinguishing features of the paper are selection of oblique strip and loading transmission, negative yielding line in irregular slab with simple supports, point support and shear split of slab.
本文的主要特点为有料向板条的选取及荷载传递、简支不规则板的负弯矩裂缝线以及点支承板条和板的剪切劈裂问题。
According to the vibration regularity of slab caster mold, the software of on line detecting and calculating parameters for the crystal mold vibration is designed and realized.
根据板坯连铸机结晶器的振动规律，设计并实现了结晶器振动参数在线辨识及其计算软件。
At the same time, accurate prediction of time meets the need of slab rolling production line, and slab has better heating quality and fuel consumption is lower.
同时准确的时间预测既保证了轧线对板坯产量的需求，又保证了板坯有较好的加热质量和较低的燃耗。
Based on the simulation, some typical processes were investigated, and some useful Suggestions for the design of thin slab continuous casting and rolling line were proposed.
采用该软件对个别典型的工艺进行分析，为连铸连轧生产线的设计提出了有益的建议。
ON-line measurements of slab width during continuous casting and strip width as well as flatness during rolling are important.
连续铸造中板坯宽度和轧制过程中带钢宽度及平坦度的在线测量非常重要。
Buffer time of tunnel furnace is the key process in thin slab continuous casting and rolling (TSCR) line.
在薄板坯连铸连轧生产线中，加热炉的缓冲能力有时成为制约生产的关键。
CSP technology is one of the mainstream technologies in thin slab production. Manufacturing execution system plays an important role in the operational management for CSP production line.
CSP是薄板带钢生产的主流工艺之一，制造执行系统在CSP生产线的运行管理中起着至关重要的作用。
The distingUishing featUres of the paper are the influences of line loads on models of yield line, the method of selecting strips, and the method of the limit analysis of the slab under line loads.
文章的主要特点为线荷载对屈服模式的影响，条带的选取方法，线荷载作用下板的极限分析方法。
And also the control function of the equipments at the slab yard before rolling and at the finishing line after rolling are held in the hands of the computers.
对轧制线的前工序板坯堆放场和轧制线的后工序精整线也同样由微型机分别承担每台设备的控制功能。
The invention also relates to a heating production line of the slab, leads the logistic line of the slab to be smooth and consecutive and reduces the turnover link during the work of the slabs.
本 发明还涉及板坯加热生产线，使坯料物流线顺畅连续，减少了坯料中间周转环节。
Few polyline rhythm formed concrete slab in the middle of the site by changing a few thin interrupted line shape, increasing the sense of rhythm, streaks of light spill at night seem interesting.
几块折线的混凝土板形成的韵律感在中间的部位被变化的几根细的折线造型打断，增加了节奏感，夜间几缕灯光溢出显得趣味盎然。
Ballastless slab track on bridge of Passenger Dedicated Line is a track of new type with stable track and bed structure high regularity and less maintenance.
客运专线桥上采用板式无碴轨道是一种新型轨道形式，它能提供稳定的道床结构，是一种高平顺、少维护线路。
According to the mechanism of the slab caster, an on line oscillation monitoring system of the slab caster mold has been designed and realized.
根据板坯连铸机的运行机理，设计实现了结晶器振动状态在线监测系统。
With the slab divider mold, be sure to line the bottom of the mold with freezer paper.
使用这些厚隔片的模具，请确保这些隔板的底部都铺上了冷冻纸。
The establishing method for the on -line mathematical model of the steel slab heating and several major control strategies are described emphatically.
重点叙述了钢坯加热在线数学模型的建立方法和几个主要控制策略。
The basic theoretical methods such as Slab method, UBET, Slip Line method, FEM, and FVM have been used in the research of metal plastic forming technology.
研究金属塑性成形规律的理论方法现在有主应力法、上限法、滑移线法、有限元法和有限体积法。
Under the conditions of larger longitudinal and cross-fall of road line, the author describes the calculations about core slab and box beam bridge chock.
阐述了在路线纵、横坡较大条件下空心板及箱梁桥楔块的设置与计算。
The strip products on medium thin slab casting and direct rolling line were analyzed based on the characteristics of the medium thin slab casting and direct rolling line.
本文主要从中薄板坯连铸连轧的特点出发，对中薄板坯连铸连轧的产品品种进行了分析。
The thin slab continuous casting and rolling production line in Tang Steel is compared with the traditional process, the main quality control ways introduced.
对唐钢薄板坯连铸连轧生产线与传统热轧生产线轧制工艺特点进行了对比，介绍了该生产线在带钢轧制中所采取的主要质量控制手段。
The characteristic impedance of unscreened slab-line is obtained, based on the investigation of the properties of the equipotential line in vertical stripline.
本文通过保角变换研究了垂直带状线中等位线的特性，结果表明其中有一根非常近似于圆的等位线。
The several aspects to be considered in the construction of the thin slab continuous casting and rolling line are highlighted in this paper.
文中着重讨论了薄板连铸连轧生产线建设中应研究的有关问题。
Considered within the framework of the ideal line flexibility, this paper derives the analytical expression of the one-way cable-slab structure's internal force calculation in the vertical load.
在理想线弹性范围内，推导了在竖向荷载作用下单向索-板结构内力计算的解析表达式。
The Finishing mill F3 repeatedly occurs accidents of rolling crack and stopping steel plate in debugging production stage of thin slab concasting and conrolling production line in Bengang.
本钢薄板坯连铸连轧生产线在调试生产阶段，精轧机F3多次出现轧裂卡钢停产事故。
In order to realize surface defect monitoring on-line of hot slab, eddy current detection technology and its experiment equipment for hot slab surface defect is introduced in this paper.
为了实现高温铸坯表面缺陷在线检测，介绍了高温连铸坯电涡流探伤技术及相应的试验装置。
The deck is a combination of vertical and horizontal steel beam and concrete slab. This bridge is a key project in the construction of Ha-Da passenger line.
桥面系采用混凝土板与钢纵、横梁全结合体系，该桥为哈大客运专线的重点工程。
The combined long funnel shape H2(High speed & High quality)straight mould was adopted for Bensteel Thin Slab Caster production line.
本钢薄板坯连铸生产线采用了组合式长漏斗形H2（高拉速、高质量）直结晶器。
应用推荐