Several main factors in the process of overflow size separation for granular materials are studied in this paper and the experimental results are introduced.
本文研究了溢流分级过程中的几个主要因素，并介绍了试验结果。
Coke handling: Quenched coke is tipped from the coke car onto a wharf from which it is transferred by conveyor to coke cutting and size separation, from which it is put out to stock.
焦炭处理： 将淬火后的焦炭从运焦车上卸到一个码头上，再从那儿通过运输带将其运往焦炭破碎机和 筛分 机进行破碎和 筛分 ，之后即可入库。
Respecting separation of concerns, even if initial size of the two concerns is rather unequal.
注重关注点分离，即使两个关注点的初始大小差别很大。
The heap is split into fixed size regions and the separation between the two generations is basically logical.
堆被切分成固定大小的区域，同时两个区域之间的分隔基本上是合理的。
In small development efforts (in terms of team size or deployments), ignorance of the separation of roles can be successful enough.
在小型开发工作中（指的是团队规模或部署规模），即使忽视角色划分也能获得成功。
As noted initially, the capacitance depends on the dielectric properties of the water and the size and separation of the conductive elements forming the water capacitor.
正如最初的电容取决于水电容的介电性能的水，形成的导电分子大小和分离。
The systematic optimization for the MEKC separation of PTC amino acids by using a dynamic scouting optimization method controlled weighted centroid variable size simplex algorithm was established.
采用控制加权可变步长单纯形算法对PTC氨基酸的毛细管胶束电动色谱分离体系进行动态优化。
Be due to a great variety and minute particle size and multivariate shape and great difference in particle's size, which brings difficulty to separation of pollens.
但由于花粉种类繁多、颗粒微小、不同种类花粉形状多变且大小相差很大，这给花粉的分选带来极大困难。
Punching is a kind of pressure process method that punching dies are used in press sheet to put pressure on the plastic deformation or separation, for a certain shape and size of components.
冲压是利用冲压模在压力机上对板料或热料施加压力使其产生塑性变形或分离，以获得具有一定形状和尺寸的零件压力加工方法。
The reliability of the separation of size- and strain-broadening from Fourier coefficients or deconvoluted profile is estimated.
分析了从傅里叶系数或真实线形分离晶粒尺寸和微观应变的可靠性；
After the structure separation completed, the grain size and shape factor increased with the increase of the heating time.
组织分离完成之后，晶粒的尺寸和形状系数随时间逐渐增大。
The results showed that the pore size played a significant role in the column efficiency for protein separation.
实验结果表明，硅胶孔径对蛋白原分离的柱效率有重要影响。
The sorbent 28 is fed by a feeder 32 to a separation device 34, which comminutes and de-agglomerates the sorbent particles 28 to their primary size distribution.
通过进料器32将吸附剂28向分离装置34进料，该装置将吸附剂颗粒28粉碎并解聚至其原始尺寸分布。
Therefore, it would find some uses in adsorptive separation of organic compounds with similar structure but different molecular size.
有吸附，表现出了分子筛效应。 可望应用于结构类似而分子体积大小不同的有机物特别是天然有机物的吸附分离。
Mechanical separation techniques have been used for many years for separating foreign matter in powdered and fluidized products based on size and weight.
在粉状食品和流态状食品中，基于异物形状和尺寸的机械分离技术已经应用许多年了。
For all the specimens, liquid phase separation structures were observed generally by DTEMand a systematic measurement of liquid droplet size distribution was carried out.
用DTEM观察了全部试样的液相分离结构，系统地测量液相小滴的粒度分布。
Suspension particle size distribution in produced water (PSD) can better represent the separation accuracy of treatment facility, and is of index significance.
出水中悬浮颗粒物的粒径分布(PSD)更能代表处理设施的分离精度，因而更具有指标性的意义。
With experimental study, the crush and rift size of every rock and soil layer can be defined with the fault separation of the cantaliver.
通过实验研究，每一层的岩土体的破碎和断裂尺寸可以用悬臂梁的断距来确定。
A powder separation device achieving improved powder-particle collection efficiency with an increase in accessory power and an increase in the size of the device kept to minimum levels.
本发明提供一种能够将辅机动力的增大或装置的大型化等抑制为最小限度而提高捕集效率的粉体分离装置。
The majority of metal-cutting operations involve the separation of small segments or chips from the workpiece to achieve the required shape and size of manufactured parts.
大部分金属切削操作需要从工件上切下碎片或碎屑，来获得所需工件的外形和尺寸。
As to the size of separation zone and intensity of separation vortex, further study is needed.
对分离区大小、分离涡强度的影响还需进一步的实验研究。
The metal and non-metal of comminuted printed circuit board scrap was studied by the method of pneumatic separation, comminuted material were separated according to density and size by wind power.
利用气流分选的方法对粉碎后的废弃印刷线路板中的金属与非金属进行了研究，粉碎后的颗粒在气流作用下按照密度与粒度进行分选。
Membrane pore size in a few nanometers to tens of nanometer range, the main material used for separation of colloidal and molecular weight of more than 500 molecules.
超滤膜的孔径在数个纳米到数十个纳米的范围内，主要被用于分离胶体物质和分子量大于500的大分子。
The research results show that a moderate centrifugal field strength is optimum for the effective separation of particles with a set size fraction in the air-sparged hydrocyclone.
结果指出，若要使某一粒度段的物料在充气水力旋流器内得到有效的分选，其离心力强度应处于适中范围。
If the grain size distribution of suspending liquid at inlet is identical, the change of inlet pressure and underflow port diameter can influence the separation efficiency.
在进料口悬浮液固相颗粒粒级分布相同的情况下，进料口压力和底流口直径的变化同样对分离效率产生影响。
As the particle size was increased, the optimum mixing and emptying time and remains were greatly decreased, and the separation degree of over-mixing was higher.
随着物料粒度的增大，最佳混合时间、卸料时间和留存量均明显减小，过度混合的分离现象也就越严重。
It is found that the transition layer composed of closed-cell with tight and smaller pore-size pores makes the asymmetriC membrane benefit of gas separation.
并发现以紧密而孔径小的闭口空胞组成的过渡层对不对称膜的气体分离有利。
It was shown that average pore size of membrane, which determined the mechanisms of mass transfer through the membrane, was the substantial factor of the membrane separation characteristics.
可以看出，决定透过膜传质机理的平均孔径，是膜分离特性的决定性影响因素。
The relation between the embedding efficiency and particle size and the thermochromism performance of the RTM/EC thermochromic microencapsule and the mechanism of oil phase separation are discussed.
深入探讨了包裹率、粒度与RTM/EC示温微胶囊变色性能之间的关系，并研究了油相相分离的成核机理。
The figure shows the required increase in pipe size in order to obtain proper separation of air from water.
这个图显示为了将气体从水中分离出来，需要增加管道通径。
应用推荐