The prospect of selective laser sintering technology is summarized.
最后总结了选择性烧结技术的发展前景。
The porous titanium plates were prepared by loose powder sintering technology.
采用松装烧结技术在不同条件下制备出多孔钛板。
The operating principle of the selective laser sintering technology was introduced.
介绍了选择性激光烧结技术的工作原理。
Finally, the coming study directions of selective laser sintering technology are described.
最后，提出了选择性激光烧结技术进一步研究的方向。
Finally, the coming study directions of selective laser sintering technology are describe...
最后，提出了选择性激光烧结技术进一步研究的方向。
It is very important to make out suitable sintering technology for ultra fine cemented carbides.
因此，针对超细硬质合金特点制定合适的烧结工艺在生产超细硬质合金中是至关重要的。
The effect of sintering technology of mullite on its bending strength was studied systematically.
系统研究了合成莫来石烧结工艺对其抗弯强度的影响。
The recent developments of the plasma activated sintering technology are briefly stated in this paper.
简述了近年来国内外等离子体活化烧结技术的新进展。
As we are using special sintering technology, our segment has superb performance in terms of life and speed.
由于采用特殊烧结工艺，我们的刀头切割效率高，并且产品一致性好。
A new technique for manufacturing hammer for food hammer mill sintering technology is dealt with in this paper.
提出了饲料粉碎机锤片制造的烧结新工艺，并且对其烧结配方、烧结工艺进行了系统的研究。
Ternary boride based cermet cladding material was prepared by in situ reaction and liquid phase sintering technology in vacuum furnace.
在真空烧结炉中通过原位反应液相烧结工艺制备出三元硼化物基金属陶瓷覆层。
Changes in sintering technology result in variation in working conditions for an electrical precipitator at the head of sintering machine.
随着烧结生产工艺的改变，机头电除尘器的工况条件也发生了变化，作为大型钢铁企业，排放达标对环保尤为重要。
The experimental results show that the present lining-ceramic sintering technology can effectively reduce gas bubbles formed during pouring.
结果表明：钢水余热烧结衬瓷技术保证了浇铸时产生较少的气泡，且衬瓷面平整，达到了可以应用的程度。
In this paper, the influence of sintering technology on the microstructure and mechanical properties of the silicon nitride ceramic were studied.
研究了烧结技术对氮化硅陶瓷显微结构和力学性能的影响。
This paper expounds the functions of expert system in the sintering technology, and analyzes the components and implementing methods of expert system.
阐述了专家系统在烧结工艺中的功能，分析了专家系统的组成和实现方法。
Low carbon and thich sinter bed sintering is an important sintering technology, featuring the advantages of high quality, high strength and less fuel consumption.
低碳厚料层烧结是一项重要的烧结技术，具有改善烧结矿质量、提高烧结矿强度、降低燃料消耗等优点。
Low carbon and thich sinter bed sintering is an important sintering technology, featuring the advantages of high quality, high strength and less fuel consumption.
低碳厚料层烧结是一项重要的烧结技术，具有改善烧结矿质量、高烧结矿强度、低燃料消耗等优点。
Some existing problems of forming metal parts by selective laser sintering technology were pointed out. The development prospect of the technology was summarized.
指出了选择性激光烧结技术成型金属零件所存在的一些问题和选择性烧结技术的发展前景。
Spark plasma sintering (SPS) is a type of novel fast sintering technology, which is characterized by high heating rate, short sintering period and high efficiency.
电火花烧结技术是一种新型的快速烧结技术。具有升温速度快、烧结时间短、效率高等特点。
Polymer coated ceramic powder can be used to manufacture mold shell with selective laser sintering technology, and the mold shell is usually used to cast and produce metal part.
利用激光烧结快速成型技术可以烧结覆膜陶瓷材料，形成铸造用型腔壳体并直接应用于铸造，制作金属零件。
At present, its preparing technologies mainly contain powder sintering technology, melt infiltration technology, Aluminum alloy directly oxidizes at high temperature technology.
目前它的制备工艺主要有粉末烧结工艺、熔体浸渗工艺、铝合金高温直接氧化工艺。
The sintering of the tile is suited to the sintering technology with a large adjustment of addition proportion of the breakage sanitary-wares, polished tile, ceramic tile and polished-tiles debris.
依此方案生产透水砖，陶瓷破损料和陶瓷废料的加入量最多可占到75%，在较大范围内调整破损洁具、抛光砖、瓷片和抛光砖磨屑间的加入比例也可以适应烧成工艺。
There are three respects of contrast between high alumina and silica sand in using for induction furnace Lining. They are the sintering technology, the using effect and the synthetic economic results.
本文从烧结工艺、使用效果及综合经济效益三方面就高铝矾土与石英砂在感应电炉炉衬上的应用做了对比。
The influence of cold processing and heat treating (sintering) technology on the microstructure and critical current density of strip materials have been studied.
研究了冷加工工艺及热处理(烧结)工艺对带材微观结构和临界电流密度的影响。
The manufacture technology of sintered steel filter and influence of primary particle shape and size, pressing pressure and sintering temperature on filtering performance are discussed.
较详细地论述了不锈钢粉末冶金过滤器的制造工艺及原始粉末形状、粒度、压制压力和烧结温度对过滤性能的影响。
The technical principle and characteristics of selective laser sintering (SLS) technology are introduced.
介绍了选择性激光烧结(SLS)技术的工艺原理及特点。
The problems in original transporting system of quick lime in sintering production of Shi Steel are introduced as well as the technology and equipment of air-transporting system.
简要介绍了石钢烧结原有生石灰输送系统存在的问题及其气力输送系统的工艺特点和设备。
Pulse electric current sintering is an advanced technology for materials synthesis and processing with potential application. But the sintering mechanism is in dispute.
脉冲大电流快速烧结技术是材料制备新技术之一，具有很大的发展潜力，但烧结机理一直存在争议。
The problems in the sintering cooler waste heat recovering system is analyzed, and the system is reformed using inorganic heat transferring technology. Waste heat recovering ratio is much improved.
对烧结机带冷机余热回收系统存在问题进行了分析，采用无机传热技术对系统进行了改造，大大提高了余热回收效率。
New technology of once sintering sulphide selenide cadmium base red glaze is researched.
研究了一种一次烧成镉硒红釉的新工艺。
应用推荐