This paper which is written on the basis of the hardware-software set up and load regulation, discusses automatic burning control process of burn-oil boiler, using 8031 single chip processor.
本文从硬件、软件设置，负荷调节等方面，论述了采用单片微型计机8031，控制燃油锅炉自动燃烧的控制过程。
In the past few years, the computer chip industry has been in the process of two major transitions, one from 32-bit chips to 64-bit and from single cores to multiple cores.
在过去的几年中，计算机芯片产业处于两个重大转变之中，一个是从32位芯片过渡到64位芯片，另一个是从单核过渡到多核。
Failure analysis is conducted for the single chip packaging process of an advanced high-range MEMS accelerometer with double cantilever beams.
对一种先进的双悬臂梁高量程MEMS加速度计的单芯片封装工艺进行了失效机理分析。
The operation principle of TSC51 Single Chip Micyoco(SCM) experimental device and the compiling process of KEIL C51 were analyzed.
分析了TSC51单片机实验仪的工作原理，阐述了KeilC51编译器编译工作过程。
This paper presented one single chip micro inertial measurement unit based on ordinary bulk micromachining process such as dissolved wafer process.
论文基于普通的体硅工艺设计实现了一个单片集成式硅微惯性测量组合。
The controllable core of the device is AT89C51 single chip microcomputer, and with more technologies, the device simulated the process of auto controlled industrial product line.
该装置以at89c 51单片微型计算机为控制核心，并结合多项技术，模拟工业自动化控制生产线的工作过程。
The loading structure, testing part and force sensors were all integrated on a single chip by bulk silicon technology and bonding process.
利用微机械体硅工艺及键合技术，把系统中的测试机构、加载机构以及力传感器集成在一个单一的芯片上。
The system makes use of MCS-51 single chip to design communication controller and oiling controller. Host computer inspects and controls oiling process through serial communication protocol.
该系统应用了MCS - 51系列的单片机，研制出通讯控制器和加油控制机，主机通过串行通信协议来对加油进行控制和监测。
In this paper, a monitoring system of drilling process by using a McS-51 single chip computer is described, and the working principle, hardware and software are given.
本文介绍了一种用MCS—51单片机实现的钻削过程故障监测系统，给出了系统的工作原理、硬件结构及软件设计思想。
Static sensor calibration process and procedure is introduced. A device for automatic sensor parameter calibration and power-fail protection based on 51 single chip computer was designed.
介绍了传感器静态标定过程及步骤，并设计了一种基于51单片机的传感器参数自动标定及掉电记录保护装置。
Butt welding machine process was introduced. 8031 single chip computer was used in controlling flashing current. Hence the flashing butt welding process automation is so achieved.
本文介绍了对焊机的生产工艺过程，并采用8031单片机对闪光电流控制，从而使闪光对焊工艺实现了自动化。
On the basis of analyzing the control process completely, the thesis designs yaw control system for WTGs using 89c51 single-chip computer as a main control unit.
在详细分析偏航控制系统控制要求的基础上，采用单片机89c51作为主控单元，设计了风电机组的偏航控制系统。
This topic carries on the constant current control to the resistance spot welding process using a system of single chip computer, whose core has used the C8051F005.
本文的研究工作利用单片机控制系统对电阻点焊过程进行恒流控制，其核心采用了集成度英明、助能强的C8051F005单片机。
Introduces a measurement method of instantaneous speed of rotation and dynamic process of speed of electric machine by means of single chip microcomputer and photoelectric transducer.
介绍了一种利用单片机和光电转速传感器来测量电机瞬态转速及电机转速变化过程的方法。
Studied a constant tension control system controlled by a single-chip processor in order to deal with the unsteadiness, which occurs in the supplying process of packaging machine cylinder material.
针对包装机卷筒材料供送过程存在的张力控制不稳定的问题，研究设计一种单片机控制的恒张力控制系统。
Every drive board can drive a diode laser. The function of control unit single chip in the driver board is to control the aging process of 16 laser diodes in current mode or in output power mode.
驱动板的控制单元-单片机实现对16个半导体激光器的老化过程进行监控，从而使激光器工作在上位机所指定的恒流状态或者恒功状态下。
This paper introduces the process of improvement for China-made mechanical looms by the Single-chip microcomputer.
本文介绍了采用单片机对纯机械式结构的国产织机进行改进的过程。
This paper probes into the method of how to use the microcomputer to realize auto-reading, focusing on the process of auto-reading with single chip computer.
本设计探讨了如何利用微机实现自动抄表的方法，着重说明了单片机自动抄录电度表的过程。
Multiplex cycle metering system of petroleum output is designed based on single chip, which includes the designs of hardware and software. Metering principle and process are formulated.
基于单片机设计了采油井石油产量的多路循环计量系统，阐述了该系统的计量原理及工艺过程，给出了计量系统的软、硬件设计。
During the process of actual debugging, the programmable control PLC can be automatically controlled and operated and single chip is flexible and easy to monitor.
在实际调试过程中，可编程控制器plc的程序能正常运行，基本达到自动检测的要求，程序较单片机灵活、方便，容易修改。
Introduce a new system to measure and control the process of gas production, in which single chip computer is used to replace wh - ZB automatic controller to accomplish this task.
介绍一种新的煤气制气过程检测控制系统。该系统采用单片机取代WH-ZB自控机来完成检测控制任务。
According to the characteristics of dark green tea press process, we had developed one kind of based single chip microcomputer control and hydraulic dark green tea press machine.
根据黑茶紧压加工的特点，研制了一种基于单片机控制的液压助力式的黑茶紧压茶机械。
A direct digital control system of SRD was designed using 80c196kb single chip as micro controller, and hardware and software debugging was made in this process.
本文以80c196 K B单片机为控制器，设计了SR电机直接数字控制系统，进行了软硬件的设计和调试。
Taking a specific production process as an example, this paper introduces the design of multi slot and unequal temperature PID controller based on single chip microcomputer.
以一个具体的生产过程为例，介绍以单片机为核心的多段不等温pid控制器的设计。
In this system, two single chip computers communicate with each other through dual port SRAM to realize high speed picture and work for display scan and graphic process respectively.
该系统采用两片单片机分别负责显示扫描和图形变换，两者通过双口sram连接，实现高速图形显示。
The introduction was made to the application of single chip computer in the process of improvement of automation for paper tableware production line.
介绍了在纸餐盒生产线进行自动化改进的过程中，对单片机的应用。
Based on MCS-51 single chip computer, a real time parallel process plan for the typical self tuning control algorithm is presented in the paper.
本文对典型的自校正控制算法提出了一种基于MCS - 51单片机的并行处理方案。
It integrates the experimental sample preparation, biochemical process and result measure on single chip for certain analytic purposes.
它将试验样品的制备、生化反应和结果检测三个步骤集成在单一器件上，能执行特定的分析功能。
This paper introduces the principle of electromotor based on single chip computer 8051PWM, and the realization process of reversible control and non-reversible control.
介绍了基于单片机8051PWM 控制的电动机原理，阐述了8051与直流电动机构成的电机可逆控制和不可逆控制的实现过程。
The output signal of the sensor is the sinusoidal signal with intermediate frequency. To sample and process this signal, a data collection circuit that centers on P89C51RD2 single chip is designed.
传感器输出的检测信号是中频的正弦电压信号，为采集和处理该信号，设计了以P89C51RD2单片机为核心的数据采集器电路。
应用推荐