The single chip computer has characteristics such as small and powerful, being the main means to design various kinds of intelligent instruments and controlling equipment.
单片机具有体积小、功能强大等特点，是设计各种智能化仪器和控制设备的主要手段。
A smart voltmeter based on a single chip computer for high voltage testing is developed.
论文作者研制了一种基于单片机的智能式高压电压表。
A 80c552 single chip computer - based data processing system for water turbine flowmeter is presented.
介绍一种以80c552单片机为核心的水轮机流量计的数据处理系统。
A new tester for the function of TTL digital circuit based on MCS-51 single chip computer is described.
本文介绍了一种以MCS—51单片机为基础的TTL数字电路逻辑功能测试仪。
This paper discusses the working principle of boiler water processing based on a single chip computer system.
叙述了用单片计算机控制锅炉软化水处理设备的工作过程。
A multichannel temperature control system for gas chromatograph realized by a single chip computer is reported.
本文报道了用单片机实现气相色谱仪多通道温度控制。
A method on expansion of multilevel interrupt priority for MCS 51 single chip computer with software is studied.
介绍了一种在不增加任何硬件的情况下用软件扩展MCS -51单片机多中断优先级的方法。
This paper introduces the measurement of fish-Finder's pulse modulating frequency with the 8031 single chip computer.
本文介绍采用8031单片微机实现探鱼仪脉冲载波频率的测量。
The SCR Rectifier Auto-SAW power source and wire feeder with single chip computer control is introduced in this paper.
本文介绍一种SCR整流埋弧自动焊机电源及送丝控制，单片机应用系统。
This paper introduces an automatic programmable vacuum porcelain furnace with a single chip computer as its central part.
本文介绍了以单片机为中心构成的全自动可编程真空牙科烤瓷炉。
This paper presents the laser pulse energy measuring and controlling system using single chip computer in laser machining.
本文介绍了在激光加工中，采用单片机构成激光脉冲能量的测量与控制系统。
The medicinal weighing and counting control system based on micro-single chip computer is presented for medicinal extruder.
提出了一种用于药用旋转式压片机片剂药品称重与计数的单片机控制系统。
The angle measuring system based on PIC single chip computer as controller and precise potentiometer as transducer is stated.
提出了一种基于PIC单片机做控制器、使用精密电位器作为传感器件测量角度的方法。
A single chip computer based multiple channel temperature data logger for both thermal resistor and thermocouple is developed.
开发了一种基于单片机的热电阻、热电偶混用多通道温度巡测装置。
The technology of single chip computer and infrared ray photoelectricity are used to detect the quality of chain in production.
将单片机技术、红外线光电技术应用于链条生产的质量在线检测中。
Using alternating dynamotor PWM frequency conversion governing controlled by single chip computer can realize digitized control.
采用单片机控制交流电机PWM变频调速，可实现全数字化控制。
This paper introduces hardware composition and software design of recording location of signal wave crest with single chip computer.
介绍用单片机记录信号波峰位置方法的硬件组成和软件设计。
With the extensive applications of single chip computer system in various trade, its reliability, security have been an obvious problem.
随着单片机在各个行业的广泛应用，其可靠性、安全性成为一个非常突出的问题。
A single chip computer controlled error compensating system USES digital display of inductosyn to compensate errors of scaled zero position.
介绍一种由单片机控制的误差补偿系统，利用感应同步器数显装置对定尺零位误差进行补偿。
The paper introduces a design to achieve the flyer's control system with a single chip computer and enter into details on the software design technique.
本文介绍了以单片机系统来实现一个飞行器的控制系统，详细说明了其中的软件设计技巧。
The hardware structure, software design and the functions of the flammable gas detector controlled by AT89C52 single chip computer are introduced concretely.
具体介绍了利用AT 89 C 52单片机控制的可燃性气体浓度检测仪的硬件结构、软件设计以及实现的功能。
Hardware circuit includes key control module, display module, plastic module of input signal, single chip computer control module and CPLD main control module.
其中硬件电路包括键控制模块、显示模块、输入信号整形模块以及单片机和CPLD主控模块。
The paper discussed the working principle, hardware circuit design and software design of a protective device, which was composed of 8031 single chip computer.
论述了以8031单片机为核心而构成的防跑车保护装置的工作原理、硬件电路设计及软件设计。
A new processing control mode of the laser microprocessing system is realized with the help of single chip computer, optical microscope and PC monitor software.
在单片机控制器、光学显微镜系统和PC机监控软件的配合下，本激光微加工系统实现了一种新的加工控制方式。
This paper introduces a new kind of DC examination and selective leakage protection system based on DC Current Sensor examination and single chip computer control.
介绍了一种基于直流电流传感器检测和单片机控制的新型直流检测式选择性漏电保护系统，重点阐述了系统应用软件的设计。
In this paper, a monitoring system of drilling process by using a McS-51 single chip computer is described, and the working principle, hardware and software are given.
本文介绍了一种用MCS—51单片机实现的钻削过程故障监测系统，给出了系统的工作原理、硬件结构及软件设计思想。
This paper proposes using 8098 single chip computer as industrial control. The rich software and hardware resource of the single chip computer is used in servo—system.
本文提出用8098单片机作为工业控制机，使其丰富的软件与硬件资源在随动系统中得到利用。
At last the main introduction is the using of LCD in combination with 80c196kc in single chip computer control system, including hardware interface and software design.
最后，主要介绍了液晶显示器在单片机控制系统中与80c 196kc的结合使用，其中包括硬件接口以及软件设计。
The paper introduced the work principle, hardware circuit design and software design of a power factor automated compensator composed mainly of 8031 single chip computer.
介绍一种以8031单片机为核心而构成的功率因数自动补偿控制器的工作原理及硬件电路设计、软件设计。
The paper introduced the work principle, hardware circuit design and software design of a power factor automated compensator composed mainly of 8031 single chip computer.
介绍一种以8031单片机为核心而构成的功率因数自动补偿控制器的工作原理及硬件电路设计、软件设计。
应用推荐