In their research they started to apply the fault simulation system for test in an all-round way and created their own software to analyze the enormous simulation data.
在研究中，他们开始了全面应用故障仿真系统进行试验，并自编软件对大量仿真数据进行统计分析。
In this thesis, we analyze and design the piezoelectric device by finite element simulation.
本论文透过有限元素法对压电元件进行模拟与设计分析。
Put the disturbance moments of typical astronaut's push-off act as the input datas of the control system simulation, and analyze the response of the attitude control system after disturbed.
以典型的航天员推离动作对飞船的扰动力矩作为控制系统仿真的输入参数，分析姿态控制系统受到扰动后的响应。
Micro simulation of the traffic flow is a computerized method to describe and analyze the traffic flow.
交通流微观模拟是采用计算机对交通流进行描述及分析的方法。
At last, the results of computer simulation and experiment are presented, they not also prove the above conclusion, but also offer a new way to analyze resonance for servo drive.
最后给出的计算机仿真和实验结果验证了上述结论，为数控伺服系统的谐振分析提供了一种新的方法。
Process and analyze speech signal by simulation. Give a method on audio record and compression adapting multi-medium web secure communication, then implement by programming.
对语音信号进行处理和仿真分析，提出了适合多媒体网络保密通信的音频获取和压缩方法，并将其编程实现。
To analyze the relation between the time frame for treatment of severe wounded and their mortality by means of computer simulation and statistical methodology.
采用计算机模拟及统计学方法分析重伤员早期治疗时间与死亡率之间的关系。
Detailed analysis and circuit implementation are provided, and a SPICE simulation method is proposed to analyze the equilibrium points and startup margin of the circuit.
文中给出详细的分析和电路实现，并给出了一种电路简并点和启动裕度分析的SPICE仿真方法。
This paper does research on the three dimensional turbulent flow fields of compressible air with highly rotation, using methods of mathematical analyze and CFD simulation.
本文以涡流管内可压缩气体三维强旋转湍流流场为研究对象，采用数学分析和数值模拟方法对涡流管内流场结构进行研究。
At the same time, use VISSIM, the microscopic traffic simulation software, to analyze traffic running condition of those points, and put forward the advices of traffic organization in the arena.
同时，结合宏观预测结果，应用VISSIM微观仿真软件分析关键节点的交通运行状况，提出世博会园区游客步行交通组织建议。
Take a numerical simulation on supersonic speed segment and the whole part of inlet duct in consideration of air induction placement, analyze its property.
并对超声速段与考虑吸气布局的进气道整体进行了数值模拟，分析了性能。
Chemical process flow simulation technique is a powerful tool for chemical engineer to design new unit, to analyze the performance and to improve the operation of the existing unit.
化工过程流程模拟技术是化工工程师设计新装置和分析现有装置性能、改进现有装置操作的有力工具。
Then we compare the throughput of DCF and EDCF with network simulation tool NS-2, and then thoroughly analyze the throughput of EDCF in saturation and slow-moving states.
使用网络模拟工具NS-2对比了DCF和EDCF的吞吐量，并对EDCF在饱和状态下以及站点慢速移动情况下的性能进行了详细的分析和比较。
Using computer simulation technology, this thesis is aimed to build a model of KM385BZL crankshaft and to analyze its dynamic characteristic in normal working condition.
本文旨在利用计算机的仿真技术建立KM385BZL曲轴模型，分析该型曲轴正常工况下的动态特性。
Simulation of the CVT's harmonic measurement distortion, and analyze the sensitivity of the main components parameters use of the steady-state circuit were conducted in the thesis.
本文仿真分析了CVT的谐波丈量畸变原理，并对其稳态电路进行了主要元件参数的灵敏度分析。
The traffic OD simulation is one of the methods through which we can analyze and process the surveyed data to acquire the actual traffic distribution.
公路交通OD模拟是一种通过对调查数据进行分析处理从而获得现状交通分布的方法。
Thus, the vibration simulation calculation procedure has certain directive significance. , to analyze and predict the comfort of the vehicle.
因此，本文所开发车辆振动模拟计算程序，对分析、预测车辆的平顺性是具有一定的指导意义的。
Function simulation are used to analyze the influence on model precision of these methods, and positive analysis of predicting dispute resolution satisfaction is conducted.
通过函数仿真分析了不同的数据预处理方法对神经网络模型精度的影响，并通过建筑项目争端解决满意度预测问题进行了验证。
The paper brought forward a new principle application scheme of fuse based on PSD, especially gave a analyze and research of simulation on the approach of target identify and method of burst control.
提出了一种基于PSD的新原理引信应用方案，重点对目标识别途径、起爆控制方法进行了分析和仿真研究；
Mold experiment and numerical simulation methods are adopted analyze the mechanical properties evolution of rock mass under blasting shock load in this paper.
通过实验室模型试验以及对具体边坡工程的数值模拟相结合的方法分析了在爆炸冲击载荷作用下岩体力学特性的演化过程。
So in this paper, a simulation platform is set up to analyze the CAN protocol and design an application layer protocol based on SAEJ1939 with the knowledge of CAN.
本文即针对以上情况，通过构建协议分析和仿真平台，对CAN协议的各层规范进行分析，并且基于对CAN总线的认识，以混合动力轿车为实现对象，制定了基于SAEJ1939协议的应用层协议。
At present, there are mainly three kinds of methods to analyze the performance of the network: Analytical method, experimental method, and simulation method.
当前对网络性能分析主要有三种方法：分析方法、实验分法、模拟方法。
A cost function is used as the criterion of performance evaluation and simulation is made to analyze the effect of all sorts of network delays on the PID control performance.
使用一种代价函数作为性能评估标准，并通过仿真实验分析了各种网络延时对PID控制性能的影响。
CFD was used to simulate and analyze an actual big fruit cold store, and the reliability of the simulation was certificated with the experiments.
利用CFD技术对一实际大型水果冷藏库流场进行了数值模拟，并通过实验验证了模拟的可靠性。
The process of the Virtual experiment can been controlled interactively by the experimenter. This makes it easier to understand and analyze simulation result of vehicle movement.
虚拟试验结果表明：虚拟试验能较好的虚拟再现实车试验的场景，参与者能交互地控制仿真过程，使人们对车辆运动仿真的分析、理解变得更为容易。
Based on the high matching of the simulation result and design condition data, simulate and analyze the existing distillation system.
在模拟结果与设计工况的数据吻合度较高的基础上，对现有的精馏系统进行模拟分析。
Also studies the Canny operator and its defect, these methods are analyzed carefully trough experiment simulation, and also analyze every operator's effect in the noise.
并对这些算法进行了仿真实验，对输出的结果进行了认真的分析和比较，还实验对比了各算法在噪声情况下表现出来的效果。
Car following model is a basic model in traffic microscopic simulation, using to analyze and describe the way one vehicle (driver) follows another in a single lane of traffic.
车辆跟驰模型是微观交通流模拟的一个基本模型，用来分析和描述在无法超车的同一车道上一辆车(驾驶员)跟随另一辆车的方式。
In this paper, a method of transient numerical simulation to simulate and analyze the nonlinear vibration of rotor bearing system is presented.
文中给出用数值积分瞬态模拟对轴承—转子系统非线性振动进行计算分析的方法。
In this paper, a method of transient numerical simulation to simulate and analyze the nonlinear vibration of rotor bearing system is presented.
文中给出用数值积分瞬态模拟对轴承—转子系统非线性振动进行计算分析的方法。
应用推荐