Some rules of processing pre-punched hole setting are summarized through the simulated results of two instances and the analysis of stress and strain for sheets.
通过对两个例子模拟结果和板料应力应变的分析，总结出了工艺预冲孔设置的一些规律。
According to above results, the horizontal displacement and strain field caused by the main fault movement have simulated and showed the interactions among boundary faults.
依据上述反演结果，模拟了区域主要断层运动引起的水平位移、应变速率场图像，显示了边界断裂及其之间的相互作用。
The variation of microstructure and mechanical properties of the welding heat-affected zone of 2090 Al-Li alloy were investigated by means of the welding thermal, simulated and strain cycles test.
采用焊接热模拟试验方法研究了在焊接热循环和应力-应变循环同时作用下，2090铝锂合金焊接热影响区显微组织和力学性能的变化特征。
The high strain low cycle fatigue properties of V ti micro alloyed high anti seismic structural steel were studied with simulated earthquake loading.
对微钒钛高抗震性能建筑结构钢进行了模拟地震载荷高应变低周疲劳试验。
This article, we simulated by ANSYS rock the size of the internal stress and strain and change.
本文通过ANSYS模拟围岩内部应力与应变的大小及变化。
OBJECTIVE: to measure strain values of simulated femoral fractures after plate fixation, to provide biomechanical parameters for new plate design.
目的：测量模拟股骨骨折以接骨板固定后各测点的应变值，以期为设计新型接骨板提供力学参数。
The test of the strain release coefficients was simulated, and the energy parameter S was obtained based on the FEM analysis resu.
并对随形状改变比能参量S变化的应变释放系数塑性修正公式进行了推广。
The forging processes of the both kinds of billets were simulated by contrast with FEM and the distributions of their velocity, strain and fibre flown line were gotten.
然后采用有限元方法，对圆柱形和锥台形两种坯料的成形过程进行对比模拟，进一步得到了它们在成形过程中速度场、应变场和金属纤维流线的分布规律。
A plane strain test is then simulated by FEM, and the material's strain rate dependency is determined in a trial-and-error process so that the experimental and the predicted FLD0 correlate.
平面应变测试，然后通过有限元模拟，材料的应变率依赖性确定的试错过程，使实验和预测FLD0关联。
Through constitution of PM space density function, the stress-strain state equation for saturated rocks has been defined and the hysteresis loops of axial stress-radial stress has been simulated.
通过构筑PM空间密度函数，求出饱和岩石的应力—应变状态方程，并模拟了其轴向应变—径向应变滞后回线。
The V-anvil drawing process of large forgings was simulated using FE software, and the stress-strain distributions in the plastically deforming area were compared after different V-anvils drawings.
利用有限元软件模拟了V型砧的锻造拔长过程，并对不同夹角的V型砧压下后锻坯塑性变形区内应力、应变的状态进行比较。
After an actual rolling process of 2050 mill was simulated by using the model, evolution laws of strain field, temperature field and microstructure were analyzed.
运用该模型对2050现场实际轧制过程进行模拟计算，分析了轧制过程轧件变形场、温度场及显微组织的演变规律。
A method is presented, by which the plane strain state on the earth's surface can be obtained with the combination of tidal line strain data and the tidal shear strain can be simulated numerically.
提出了由潮汐线应变的组合观测资料获取地表平面应变状态和对潮汐剪切应变进行数值模拟的方法。
The strain distributions of four kinds of radial forging processes have been simulated by rigid-plastic FEM.
采用三维刚塑性有限元法对四种径向精锻变形道次的变形分布进行了数值模拟计算；
Actual roughing process of low carbon steel SS400 was simulated using the model and 3-d distribution laws of strain field, temperature field and microstructure were obtained.
运用该模型对低碳钢ss400的现场实际轧制情况进行仿真计算，得到轧件三维变形场、温度场及显微组织的分布规律。
Accordingly, we investigated the peak strain of the ALL following single - and 2-level fusion during simulated whiplash.
相应地，我们研究了一个和两个颈椎节段融合后，模拟挥鞭伤过程中前纵韧带的应力峰值。
The tensile stress -strain curves of composites were also simulated.
对存在热残余应力时复合材料的应力—应变曲线进行了模拟；
This paper has simulated the driving force of solidification crack of stainless steels, namely the, stress strain field in the trail of molten weld pool.
对不锈钢凝固裂纹的驱动力即熔池尾部应变场进行了模拟。
The stress, strain, and displacement of component of the cutters have been simulated under different rotate speeds in ANSYS.
采用ANSYS进行了不同转速下高速面铣刀刀体、刀片、刀具附件等刀具构件、装配的应力、应变、位移有限元分析。
The temperature and stress-strain field of steel plate runout table cooling are simulated using thermo-elastoplastic finite element method.
针对钢板冷却发生翘曲变形的问题，利用热弹塑性有限元法对中厚板冷却过程的温度场及应力应变场进行数值模拟。
The settlement of wastes and the stress and strain status of geomembranes on a landfill slope were simulated by centrifugal experiments, and the results were compared with those of FEM calculation.
用离心试验法模拟了填埋体的沉降和边坡土工膜的应力应变状态，并将其与有限元计算结果进行了对比。
The temperature, strain and stress fields in modest hot slide were numerically simulated using sequentially coupled 3-dimensional heat transfer and stress equations and finite element method.
耦合三维传热和热应力方程，采用有限元法对加热炉半热滑轨的传热、应力和应变进行了数值模拟。
The temperature, strain and stress fields in modest hot slide were numerically simulated using sequentially coupled 3-dimensional heat transfer and stress equations and finite element method.
耦合三维传热和热应力方程，采用有限元法对加热炉半热滑轨的传热、应力和应变进行了数值模拟。
应用推荐