Wavelet Transfer (WT) is a powerful technique in signal separation. It is very easy for WT to improve the signal-to-noise (SNR) by separating the random noise and useful signal.
小波变换技术具有很强的信号分离能力容易把随机噪声从信号中分离出来，从而提高信号的信噪比。
The signal to noise ratio (SNR) of tumors, contrast to noise ratio (CNR) and signal intensity ratio (SIR) of tumors and normal liver were calculated and analyzed.
计算不同图像中肿瘤信噪比（SNR）、肿瘤与肝脏对比噪声比（CNR）及信号强度比（SIR）等数据，并进行统计学分析。
It has a signal-to-noise ratio (SNR) of at least 75 dB.
它有一个信号杂讯比(信噪比)的至少有75分贝。
The time frequency difference between grain noise and defect signal provide a possibility for enhancement of signal-to-noise ratio (SNR) in ultrasonic testing.
晶粒噪声和缺陷信号的时频特征的差异，为提高超声检测的信噪比提供了可能。
Speech enhancement tries to extract clean speech signal from original one with noise and improve the SNR of speech signal.
语音增强则从含噪信号中提取干净的语音信号，提高语音信号的信噪比。
However, in respect of a vibration acceleration signal, the signal to noise ratio (SNR) is often so small that the periodic impulse component is submersed in its intense background noises.
通常检测的机械振动加速度信号，由于信噪比太低，即使存在周期性的冲击分量也往往被淹没在强的背景噪声之中。
A method for reducing noise based on high-order spectra was presented by which the signal-to-noise ratio (SNR) could be improved significantly and the flaw characteristic information could stand out.
提出了基于高阶谱的减噪方法，能有效提高回波信号的信噪比，减弱检测噪声对于缺陷散射特征的影响，从而突出缺陷特征信息。
For MPSK signals, the signal-to-noise ratio (SNR) estimation can be directly transformed into the signal module estimation.
对于MPSK信号而言，信噪比的估计可以直接转化成对信号模的估计问题。
Most resent approaches to the problem employ noise estimate or Signal-Noise Ratio (SNR) estimate, and hence their performances depend on the estimation of noise.
目前的处理方法普遍需要估计噪声或者信噪比，从而其性能依赖于噪声估计的好坏。
We introduce a general model for the calculation of the optical signal to noise ratio (SNR) of the optical cross connection (OXC) in optical networks in this paper.
文章给出了计算OXC级联信噪比的一般解析模型，并针对“信号功率均衡”和“总功率均衡”两种方案进行了研究，分析了在这两种特定情况下系统的信噪比特性。
To overcome pulse noise influence to image quality, discrete dyadic wavelet transform (DDWT) is used to reduce the noise influence and improve signal to noise ratio (SNR).
为了克服噪声对超声检测成像质量的影响，利用离散二进制小波变换的分解重构算法来降低脉冲噪声的干扰，提高超声图像的信噪比。
In terms of given manufacture process planning, signal-noise ratio (SNR) was employed to scale quality loss of each process.
针对加工工艺规划，提出采用信噪比衡量各道工序对产品质量损失的影响。
The infrared gas sensor contains an open-path gas chamber, a high SNR (signal to noise ratio) infrared detector, and an electrical modulated MEMS infrared emitter.
红外气体传感器采用开放式气室，选用高信噪比的探测器和电调制的MEMS红外光源。
As compared with that from the electronics system by detecting and filtering direct the signal-to-noise (SNR) of modulation signal from the nonlinear bistable system is higher.
与直接经电子学系统检波、线性滤波后所提取的调制信号相比，前者所获调制信号的信噪比更高。
Comparing with impulse radar, this method can greatly improve the signal to noise ratio (SNR), the convergence speed is quick, and iterative times are less than 10.
与冲激雷达相比，这种方法能显著提高信噪比，并且这个方法的收敛速度快，一般迭代10次以内即达到稳定。
A new digital modulation recognition method based on instantaneous information is proposed for the application under the low signal-to-noise ratio (SNR).
针对数字调制识别在低信噪比下的应用，提出一种新的基于瞬时信息的调制识别算法。
The experiment results show that the new technique outperforms the conventional spectral subtraction methods in spectrogram characteristic, output signal-to-noise ratio (SNR) and aural performance.
实验结果表明，新算法比传统谱相减算法有更优的语谱特性、更高的输出信噪比和更好的听觉性能。
In deep space communications, one of the problems is how to transmit message credibly in low signal-to-noise ratio (SNR) channel environment.
深空通信中面临的问题之一就是如何在低信噪比信道环境下可靠地传递信息。
The experimental results demonstrate that the method can give a better estimation of poles of damped exponential signals even in a lower signal-to-noise ratio (SNR) situation.
通过实验表明，该方法较其它方法简单有效，即使在较低信噪比的情况下，也能对极点作出较好的估计。
The performance of the adaptive binarization thresholding method has been compared with that classical optical correlator in the areas of correlation peak to and SNR (signal to noise ratio).
和传统的联合变换相关器结果比较，自适应阈值法对于输出的相关峰值、信噪比等主要参数都有明显提高。
Comparing with the Linear Minimum Mean Square Error (LMMSE) channel estimation method, the method is simple and need not know the channel correlation and signal-to-noise (SNR).
与已有线性最小均方差(LMMSE)信道估计方法相比，该算法简单并且不需要预先知道信道相关矩阵以及信噪比等信道信息。
It was indicated that this method could significantly improve the signal-to-noise ratio (SNR) and efficiently filter the noise peaks, while the peak position and height remained unchanged.
仿真信号和冬虫夏草的毛细管电泳信号滤噪结果表明，该法在保持峰位与峰高不变的情况下可显著提高信噪比，有效滤除噪声峰。
To improve the Signal-to-noise Ratio(SNR) and detecting probability of small target in infrared image sequences, a novel method of target detection based on spatial-temporal filtering is proposed.
为了提高红外图像序列中弱小目标的信噪比和检测概率，同时考虑检测算法实时性，提出了一种新的基于空时域滤波的小目标检测方法。
By using subspace disturbing analysis to investigate the statistical performance of the CSS, the relationship between the DOA estimation error and the signal to noise ratio (SNR) was presented.
应用子空间扰动分析研究了宽带CSS法的统计性能，得出了宽带CSS法方位估计误差随信噪比变化的关系。
The paper analyses the energy and signal noise ratio (SNR) with grating to measure passive laser wavelength in real time, provides the theoretical basis for measurement and error from the method.
从理论上分析了利用光栅实时测量被动入射激光波长的能量分布及信噪比，给出了计算公式及误差分析。
We theoretically discussed the synchronization sample gate time determination by considering the optimal Signal-to-Noise Ratio (SNR) where the background showed time-uniformity distribution.
本文通过最佳信号噪声比分析，讨论了单分子辐射单光子在具有时间均匀分布背景信号时对同步取样时间的选取。
Based on the analysis of noise characteristics of the power signals, an approach to modeling the signal-to-noise ratio (SNR) is proposed and corresponding theory is demonstrated.
在分析功耗信号的噪声特点以后，提出了一个信噪比(SNR)的建模方法和相应理论的证明。
Synthesis and integration can improve the signal-to-noise ratio (SNR) of output signal, thus increasing the signal detection probability and extending the radar range.
合成与积累可以提高输出信号的信噪比，从而增大信号检测概率，增加雷达的作用距离。
Synthesis and integration can improve the signal-to-noise ratio (SNR) of output signal, thus increasing the signal detection probability and extending the radar range.
合成与积累可以提高输出信号的信噪比，从而增大信号检测概率，增加雷达的作用距离。
应用推荐