The extensional simple shear model of the Chagan fault depression is established.
建立了查干凹陷发育的简单剪切模式。
In this method, an inter floor shear model is adopted for the whole RC structure; and a quadrilinear recovery force model, for the RC inter floor columns.
该方法中钢筋混凝土框架整体结构采用层间剪切模型，柱采用四线性恢复力模型。
The developed laminar shear model box lays a firm foundation for the success of the test and can also be adopted in other tests for seismic geotechnical problems.
试验结果表明，所设计的叠层剪切变形模型箱不仅为本次试验获得成功打下了坚实的基础，还可以应用于其他岩土地震问题的试验研究。
The process include three aspects:(1) From " story shear model", the story lateral stiffness is deduced, and compared with the rectangular column frame structure.
建立异形柱框架结构“剪切层模型”，导出了异形柱框架的抗侧移刚度公式，并和矩形柱框架的抗侧移刚度作了比较；
Based on the 3D analysis result, shear models of ring joint bolt is built and shear parameters between rings needed in 2D analysis with beam-spring model can be obtained by this shear model.
然后，在对三维有限元分析结果研究的基础上，建立了环缝处的纵向螺栓剪切模型，利用该模型可以计算得到错缝拼装衬砌二维梁-弹簧模型中环间剪切弹簧的刚度；
The model was successfully validated and used to simulate time-varying responses of engineered AF under shear and biaxial loading.
模型成功地被证实并使用于模仿在剪切和双轴向负荷下反应程度依时间变化的组织工程纤维环。
One dimensional shear strain rate gradient formation of the second order is proposed based on the non-local continuum model.
根据非局部连续介质模型，提出了一维二阶剪切应变率梯度格式。
A relation model between cutting forces and cutting speed is established for high speed milling condition on the basis of research into the theory of shear distortion and the discrete milling cutter.
本文首先从切削剪切变形和刀具离散化理论出发，推导出高速铣削条件下铣削力和切削速度的关系模型。
The compound of Alkali Surfactant Polymer (ASP) is a kind of viscoelastic fluid, its rheological behavior can be formulated by power law model in simple shear flow within medium shear rate.
就其流变性而言，聚合物溶液和碱—表面活性剂—聚合物（ASP）复合体系均属粘弹性流体，但在中等剪切速率的简单剪切流动条件下，其流变性可用幂律模式描述。
Using spring to model the shear connection between concrete slab and steel girders shows that the connection is comparatively strong and can be treated as full restrained.
用弹簧单元模拟桥面板与钢梁的联结，结果表明该桥混凝土桥面板与钢梁的联结比较紧密，二者的联结可以视为固结。
The experiment and analysis results show that frame model with truss transfer storey has partial bending shear deformation.
试验和分析结果表明：带桁架转换层框架呈局部弯剪型的变形特性。
Model predictions demonstrated that fibers resist shear even when the shearing direction does not coincide with the fiber direction.
模型预测证明纤维能抵抗剪切力甚至当剪切力方向和纤维方向不一致时。
The role of shear strain rate of an environmental flow in typhoon propagation is investigated using a shallow water model.
利用浅水波正压模式研究了环境流场切应变率对台风移动的影响。
Results show that, conventional point dipole model has overrated the magnetic-induced shear modulus of the magnetorheological elastomers.
计算结果表明，传统的点偶极子模型高估了磁流变弹性体的磁致剪切模量；
Based on the experimental results, the calculation formula model of shear capacity of lightweight aggregate concrete beams is put forward.
在试验的基础上提出了集中荷载作用下轻骨料混凝土梁受剪承载力计算公式的模型。
A model is proposed for predicting the effective longitudinal shear modulus of fiber reinforced composite materials.
本文给出一个计算单向纤维增强复合材料纵向剪切模量的模型。
The effect of shear rate on shear stress is included in the revised model.
修正后的计算模型考虑了土壤受剪速度对其剪切应力的影响。
The theoretical model of shear mode micro jet is established and the edge displacement under dynamic driving voltage is analyzed .
本论文建立了剪式微喷的结构理论模型，分析了在动态电压作用下端部的变形；
This paper compared several mechanical models with transverse shear deformation and put forward a kind of layer model assuming that shear stresses vary parabolically through the plate thickness.
比较了考虑横向剪切变形的几种力学模型，提出了一种新的假定剪应力沿板厚呈抛物线分布的分层模型。
The different transformation model can produce different shear strain, so they show different shape memory effect.
采取不同的相变模式产生不同的切变应变，合金获得不同的形状记忆效应。
Shear beam model for interface failure was used for the earthquake occurring analysis in this paper.
将剪切梁层间失效模型用于分析地震的发生。
By introducing a damage variable expressed by the equivalent shear stiffness, a dynamic shearing damage constitutive model of rock is established including three phases.
定义了用等效剪切刚度表示的损伤变量，建立了一个分三阶段表述的岩石动态剪切损伤本构模型。
A hyperbola model, a modified hyperbola model and a exponential model for describing shear property of soft terrain and methods for determining their parameters are presented.
提出了描述松软地面剪切特性的双曲线模型、改进的双曲线模型、纯指数模型和确定它们的参数的方法。
Multi vertical line element model is the most widely used model in the nonlinear analysis of shear wall structures.
多垂直杆元模型是目前最为常用的一种用于剪力墙结构非线性分析的宏观模型。
By means of a new void - containing material model, analysis of shear localization for plastic materials is carried out.
利用新的含微孔材料模型对塑性材料局部剪切失稳进行了分析。
The monotonic shear testing of two-story model reinforced masonry shear wall in different compressive force was performed.
随后进行了两榀两层配筋砌块砌体剪力墙在不同竖向荷载下的单调加载受剪性能试验。
A simplified theoretical solution is also derived for the loading-carrying capacity of the joint, based on the punching shear failure model.
文中还推导了基于冲切面剪应力破坏模型的节点承载力的简化理论解。
The sensitivity of lateral shear interference is quantitatively discussed and the model of average sensitivity is presented, it can explain the theory of lateral shear interference completely.
本文对剪切干涉灵敏度进行定量讨论，首次提出平均灵敏度数学模型，它圆满地解释了剪切干涉特性。
The sensitivity of lateral shear interference is quantitatively discussed and the model of average sensitivity is presented, it can explain the theory of lateral shear interference completely.
本文对剪切干涉灵敏度进行定量讨论，首次提出平均灵敏度数学模型，它圆满地解释了剪切干涉特性。
应用推荐