It is shown that the characteristics of shear stress acting on bolt vary in different zones zone of surrounding rock and are reflected in the axial stress distribution of bolt.
结果表明，在围岩不同区内，锚杆所受剪切力具有不同的特点，而且，锚杆所受剪切的特点在锚杆轴力分布中得到了反映。
In the connection design of steel structure, the shear plate with high-strength bolt connection is extensively used at the flexible joint where the beam is connected to the weak axis of the column.
钢结构节点设计中，梁与柱弱轴方向的柔性连接常采用剪力板高强螺栓连接，螺栓群所承受的荷载有竖向力和偏心力矩。
This article studies the influence of the bolt tightening torque on the fretting damage of LY12CZ aluminium alloy double shear lap bolted joint by experimental and conumerical analysis.
从试验和数值分析两个方面研究了螺栓预紧力矩对LY12CZ铝合金双盖板对接螺纹联接件微动损伤的影响。
In the design of articulation hole bolt, the blur variable and random variable existing at the same time, the blur reliability design method of shear strength and extruding strength are approached.
探讨了在铰制孔用螺栓设计中，模糊变量与随机变量同时存在时，抗剪强度与挤压强度的模糊可靠性设计方法。
This paper analyses and studies the function of shear bolt nails in imbedded heels under pressure. According to the experimental result, a more reasonable calculating method is raised.
对埋入式柱脚中抗剪栓钉的受力性能进行了分析和研究；根据试验结果，提出较为合理的计算方法。
The brake moment is overcome by the resilient pin, and the shear force is not applied to the coupling bolt, which enhances the reliability of the coupling bolt.
制动力矩由定位销克服，联结螺栓不受剪切力作用，加强了联结螺栓的可靠性；
Steel Series: steel with high strength large hexagon head bolts, torsion shear bolt connections made, the steel truss joints of high strength bolts, studs, drill the end of wire.
钢结构系列：钢结构用高强度大六角头螺栓，扭剪型螺栓连接副，钢网架球节点用高强度螺栓，焊钉，钻尾丝等。
The shear resistance of bolted joint can be obviously improved by higher ratio of bolt section to bolted joint area and inclined bolt.
倾斜锚杆加固的节理抗剪强度比垂直锚杆大，提高锚固面积比能显著提高节理抗剪强度。
An analysis of anti-pulling mechanism was discussed on the base of the shear stress-displacement characteristics between grouted bolt-the soil layer.
针对锚杆-土层间的剪应力-位移特点，深入分析了灌浆锚杆抗拔机理。
PBL connector and embedded connector) and traditional bolt connectors are contrasted, and shear connector of composite steel-concrete connector is especially analyzed by FEA method.
通过分析两种新型的连接件内形成的砼抗剪销对抵抗组合梁的纵向剪力的作用，寻求最适宜用于实际工程的连接件；
The distribution curves of the shear stress and axial force along the axial direction of the GFRP bolt were obtained using MATLAB.
利用MATLAB软件编制程序得到GFRP锚杆的剪应力及轴力沿杆体轴向方向的分布曲线。
When the bond is destroyed the shear stress distribution on the bolt side can be expressed by parabolic curve.
的债券被破坏时的剪应力分布的螺栓端可以表示为抛物线。
When the bond between bolt and grout is intact the shear stress distribution of the bolt side is described by exponent curve.
当锚杆与砂浆的粘结未破坏时，以指数曲线来描述锚杆的侧剪应力分布；
Based on the 3D analysis result, shear models of ring joint bolt is built and shear parameters between rings needed in 2D analysis with beam-spring model can be obtained by this shear model.
然后，在对三维有限元分析结果研究的基础上，建立了环缝处的纵向螺栓剪切模型，利用该模型可以计算得到错缝拼装衬砌二维梁-弹簧模型中环间剪切弹簧的刚度；
The connection mode that the end of steel plate shear wall is firstly welded onto a piece of steel plate, then connected by high-strength bolt is reasonable and reliable;
屈服钢板墙约束板端部先焊接厚钢板，再用高强螺栓连接的方式较为合理可靠；
The connection mode that the end of steel plate shear wall is firstly welded onto a piece of steel plate, then connected by high-strength bolt is reasonable and reliable;
屈服钢板墙约束板端部先焊接厚钢板，再用高强螺栓连接的方式较为合理可靠；
应用推荐