The extended algorithm is simple, convenient and can solve the problems of position adjustment and shape control of curves and surfaces that exist in engineering.
本文提出的算法简单、易于操作，可方便地解决工程实际中曲面位置调整和形状控制问题。
The results we obtained prove that the power function curve can not only improve the service life of the backup roll but also benefit the profile and shape control of hot rolled strip.
经试验验证，采用幂函数的辊形优化曲线可提高支撑辊使用寿命，并有利于板凸度和板形控制。
Current shape control means applied to temper mill is backward compared with cold-rolled.
目前应用于平整机的板形控制手段较冷轧来说相对落后。
The thermal contour on-line prediction of work rolls is one of the difficult problems in strip shape control.
实现工作辊热辊形的在线预报是板形控制的难题之一。
A geometric spline method for shape control of planar manipulators with hyper degrees of freedom was presented.
本文提出了平面超自由度机器人形状控制的样条曲线方法。
In this paper, we introduce methods of shape control and application of shape control in cold and hot strip mill.
本文介绍国外有关板形控制的方法及在冷、热板轧机上的应用。
The effect and ability of the shape control instrument on the aluminum foil rolling mill in Alcoa (Shanghai) co. Ltd.
分析了美铝(上海)铝业有限公司铝箔轧机板形控制手段的作用和能力。
With piezoelectric actuators as control elements, the basic equations of shape control for adaptive truss was formulated.
以压电作动器为控制元件，建立了自适应桁架形状控制基本方程。
This paper summarized the applications of piezoelectric materials on shape control and vibration control of smart structures.
综述了压电材料在智能结构形状和振动控制中的应用。
The test shows that this technology is simple and easy to operate and is an effective measure for the shape control of the plate.
试验表明，展宽纵轧是简单易行的中板平面形状控制的有效方法。
By the technique of intermediate roll shifting, the HC-mill's gap stiffness and the shape control ability is improved significantly.
HC轧机采用中间辊轴向窜动技术，使轧机的横向刚度显著增加，提高了板形控制能力。
As far as the technique is concerned, theoretical basis and key scientific problem is the theory and mathematic model of shape control.
板形识别与板形控制理论及数学建模则是此项技术的理论基础和关键科学问题。
The reason of the shape defect during aluminium foil rolling is introduced. The principle and method of sheet shape control are explained.
阐述铝箔轧制中板形缺陷产生的原因，板形控制的原理及其方法。
DSR (Dynamic shape Roll) technology is the latest achievements of shape control, in theory it's the ideal shape control technology at present.
动态板形辊(DSR)技术是板形控制的最新成就，是目前比较理想的板形控制技术。
Piezoelectric fiber composite actuators find important application in shape control, vibration control, flutter suppression and buffet control.
压电纤维复合材料驱动器在形状控制、振动控制、颤振抑制与抖振控制等方面有广泛的应用前景。
The industrial trials of the online shape control models which include roll configuration, and bending force preset calculation were carried out.
完成了包括辊型配置和弯辊力自动设定等的板形在线控制工业试验。
Automatic profile and flatness control system is composed of shape control software, hardware and network configuration and measuring instrument.
自动板形控制系统包括板形控制软件、硬件及网络配置和检测仪表。
Crown and flatness are the targets of shape control, also are the foundation of the setting and the adjusting of bending forces in hot strip mills.
凸度和平坦度是板形控制的目标，也是对热连轧机工作辊的弯辊力进行设定和调整的基础。
The article introduced the system of shape control, the establishment of control model, the control and adjustment of shape of HC cold rolling mill.
介绍了HC冷轧机板形控制系统、控制模型的建立及板形的控制和调节。
Analyzing the shape control characteristic of the mill on the base of it, the shape preset control model of the mill is made with some control tactics.
在此基础上，分析轧机板形控制特性，以一定的控制策略，建立起该轧机的板形预设定控制模型。
The load distribution of draft is a key factor in shape control for plate mills where roll bending system or roll shifting system has not been equipped.
对于缺少弯辊等装置的中板轧机，压下负荷分配是一种重要的板形控制手段。
The ability of shape control could be improved by the application of WRS rolls as the downstream stands in the design and renovation of hot strip rolling.
在热带钢连轧机设计及改造中采用WRS辊系作为下游机座可以增强机组的板形调控能力。
Through the research of cross-section shape control methods, scale vector is finally chosen to be applied as the control technique for shape optimization.
通过对截面形状控制方法的研究，选择比例向量法对截面进行优化控制。
Shape set control system is a very important part of the automatic shape control system, and it determines the accuracy of strip head profile and flatness.
板形设定控制系统是整个板形自动控制系统中非常重要的一部分，决定着带钢头部板形的控制精度。
The invention relates to plate shape control of cold-rolling strip steels, in particular to a DSR plate shape control method with asymmetrical control performance.
本发明涉及冷轧带钢的板形控制，尤其涉及具有非对称控制性能的DSR板形控制方法。
In order to realize the automatic shape control of UC mill, the simply constructed shapemeter used in the laboratory wns designed, and the experiment was carried out.
为了实现UC轧机的板形自动控制，研制了实验室用简易板形检测装置，并进行了实测实验。
The on-line and continuous flatness detection of the hot-rolled strip is one of the most important links in the modern strip shape control system on the hot strip mills.
热轧带钢平坦度的在线连续检测是现代热轧带钢连轧机板形控制系统中重要的环节之一。
The experiments are carried out and the results and analysis show that this control system has good performance. It can be used in the combined gauge and shape control system.
理论分析与实验结果表明，这种控制系统具有良好的控制效果，可以用于轧机板厚板形综合调节控制系统中。
In the online strip shape control model during hot rolling, accurate prediction of the comprehensive contour has a direct influence on the accuracy of strip shape control model.
在热轧带钢板形在线控制模型中，综合辊形的计算精度直接影响板形控制模型设定的准确性。
The corresponding shape control model based on the evaluation function is given, and the possible realization ways of the model are discussed for application in different situation.
本文建立了基于效应函数的冷轧机板形控制模型，并根据应用场合的不同，着重探讨了其实现具体应用的可能方式。
应用推荐