Rapid near net shape casting technology can reduce the period of making model and the cost.
由此产生的近终型制模技术，可以极大的缩短制模周期、降低生产成本。
Rapid near net shape casting technology can reduce the period of making moulds and the cost.
近终型制模技术，可以缩短制模周期、降低生产成本。
Based on the experimental result of bar shape casting, the deformation mechanic of castings was analyzed.
以杆状铸件变形实验结果为依据，分析了铸造变形机制；
ABSTRACT the main defects in net shape casting technology based on rapid prototyping technology are studied systematically in the paper.
本论文对基于快速原型技术的净成形铸造中存在的主要缺陷进行了系统研究。
The solidification process of complex - shape casting is too complex to analyse with experiment or experienced method. This causes it very difficult to design the casting process correctly.
形状复杂的铸件热节多，相互之间又有较大的影响，其凝固过程不易准确掌握，这就为铸造工艺设计带来困难。
To Sulzer is due the casting of them into the generally accepted shape.
以苏尔寿，这是因为铸造他们成为人们普遍接受的形状。
To get a more precise final result before casting the shape, I covered the foam in clay so that I could sculpt the last adjustments.
在铸造形状之前，为了得到更准确的结果，我把泡沫上覆满了粘土，这样我就能做最后的调整了。
Which practically means, that the casting moulds of the upper picture were translated into the architectural shape of the lower picture while undergoing minor changes during this translation process.
这实际意味着，上面图片的铸模被建造成下面图片的建造形式，然而在这一转化过程中有着细微的变化。
The Oscar first takes shape in the casting process.
奥斯卡首先在铸造过程中成形。
Shape memory and supper elasticity properties of the Cu-Al-Ni alloys prepared by ohno continuous casting process were tested after different heat treatment, and the mechanisms were analyzed.
用热型连铸技术制备了铜-铝-镍合金，对经不同热处理后的合金进行了形状记忆和超弹性试验，并分析了相关机理。
An optimization design of the crystallizer internal shape for semi-continuous casting was proposed according to the outside dimension data of the flat ingots.
通过对铝合金扁铸锭外形尺寸实测数据的分析，提出了一种半连续铸造结晶器内腔形状的优化设计方案。
These polysilanes can be formed into desired shape by potting, casting or coating and crosslinked by ultraviolet irradiation in the presence of multifunctional vinylsilanes.
这些聚硅烷可用灌注、浇铸、涂敷等方法制成各种形状，并能在多乙烯基硅烷存在下，以紫外光辐照进行交联。
The results laid a foundation for further optimization of mold's internal shape and casting parameters.
该研究结果为进一步优化薄板坯连铸结晶器内腔形状及工艺参数提供了依据。
If the casting is taken out from the moving die, long distance core pulling is needed according to the shape of the casting, so the mechanism of the sliding block which rotates midway was designed.
根据铸件形状特点，若在动模内取出铸件，需长距离抽芯，故设计了滑块中途自行转动机构。
Inferring from the flaw detection of X-ray, the sword possibly first forged the body by block casting iron, then cast the bronze handle, at last cast together to shape the sword.
从X射线探伤分析的情况推测，它很可能是先用块炼铁锻制刀身，之后再浇铸铜柄，而合铸成型的。
As a new sort of near net shape continuous casting technology, twin roll continuous casting technology is widely attended by domestic and overseas researchers in recent years.
双辊连铸技术是一种新型近终形连铸技术，近年来受到普遍关注。
The shadow regions of building in color aerial image can provide clues about the shape and position of its casting objects.
在彩色航空影像中，建筑物阴影能提供大量关于建筑物形状、位置等相关信息。
The outer surface temperature of the sand casting approximates its center temperature in the solidification period and it is independent of the casting shape.
在砂型中浇注时，凝固期间铸件外表面温度接近的中心温度，与形状无关。
The properties of RE-boronizing layer relative to casting quality, and the suitable temperature is necessary for lightening change of shape.
球墨铸铁表面共渗层的性能与铸造质量有关，同时还要选取适当的共渗温度以减少变形。
Our vacuum tube Wrapper has its own characteristics, Die casting, size and shape is very stable. Solid very conducive to the closure Poles casting.
我们的真空管包封有自己的特点，是成形模浇铸的，外形尺寸非常稳的，很利于固封极柱的浇铸。
Four Kings made of iron still in great shape. Amazing casting techniques for stainless steel - seriously, they used Cr. etc.
北宋铸造的四天王铁像至今仍闪闪发光——伟大的不锈钢啊！
There are about 50 near net shape continuous casting facilities which have been commissioned or under building in the world, including about 6 facilities for stainless steel strip.
目前全世界已建成投产和尚在建设中的薄板坯连铸生产线达50多套，其中生产不锈钢带的约有6套。
The results show that the effect factors of EMBr are slab width, casting speed, the shape of submerged entry nozzle and so on.
结果表明，电磁制动的影响因素有板坯宽度、浇注速度、浸入式水口的形状等。
The shape of the shell casting is complex, there are four deep holes in two sides of the shell.
壳体铸件形状复杂，两侧面带四个深孔。
The cow horn shape water inlet (2) and the crystallization cavity (19) are tightly matched to form a closed casting system.
牛角形水口（2）与结晶腔（19）严密配合形成密闭的浇铸系统。
The near net shape thin strip casting process, a competitive new technology, can simplify procedure, save energy, reduce energy consumption and cost.
近终形薄带连铸是钢铁工业简化工序、节能降耗、降低成本最具有竞争能力的一项重大新工艺技术。
Continuous casting of hollow tube is considered as a profound near net shape technology for pipe production.
空心管坯连铸技术被认为是管材生产更深层次的近终形制造技术。
The die casting-forging processing is suitable for producing automobile parts with complicated shape and high strength as well as other structure components.
铸锻双控成形工艺主要适合生产形状复杂和高强度要求的汽车零部件和其他结构件。
Thin slab concast & conroll combines the near net shape continuous casting and the direct rolling together, thus to shorten the conventional continuous casting & rolling process.
薄板坯连铸连轧将近终形连铸与直接轧制相结合，缩短了传统连铸与轧钢工艺流程。
Thin slab concast & conroll combines the near net shape continuous casting and the direct rolling together, thus to shorten the conventional continuous casting & rolling process.
薄板坯连铸连轧将近终形连铸与直接轧制相结合，缩短了传统连铸与轧钢工艺流程。
应用推荐