Bushings: Furnishes shaft support at three locations for positive shaft alignment and actuator support.
衬套：在三个位置上配置轴支撑，有利于轴校直和执行机构的支撑。
Designed taking into account the operating lever of the fitting and the shaft support, easier to install.
设计上同时考虑操作杆的贴合及传动轴的支撑，更易于安装。
Bushings (4) : Furnishes shaft support at three locations for positive shaft alignment and actuator support.
衬套(4)：在三个位置上配置轴支撑，有利于轴校直和执行机构的支撑。
For many of the mechanical system of linear reciprocating motion of the supporting role, or transmission shaft support and cooperation, and linear bearing.
用于各种有直线往复运动的机械系统中，起支撑或传动的作用，常与轴支撑、直线轴承配合使用。
They are particularly suited to low specific gravity applications where the back-to-back design and center bush provide natural axial balance and additional shaft support.
该类型泵特别适合于低比重介质的工况， 在这种情况下背对背的设计及中间衬套可以产生自然的轴向平衡和附加的轴支撑。
SK Series Shaft support: Vertical-axis precision machining of aluminum activities in support units, follow the standardized design, with interchangeable, low cost, design efficiency and so on.
SK系列轴支撑：立式轴支撑精密加工的铝制活动单元，遵循标准化的设计，具有可互换性，成本低，设计高效等优点。
To gain satisfactory support both the shaft shoulders as well as the housing shoulders must have a certain minimum height.
为了获得令人满意的支持轴肩，以及住房肩膀，必须有一定的最低高度。
During the start and stop of the drive shaft, the swing frame of the soft support will have a very obvious vibration.
在传动轴启动和停转的过程中，软支承的摆架会有非常明显的振动，硬支承的摆架则没有这种现象。
The motor housing encloses the armature and pole pieces, holds the bearings that support the armature shaft, and provides the terminals for connecting the motor to the rest of the staring system.
启动机外壳内装入电枢与磁极，外壳两端的轴承支撑电枢转轴，并将启动机与启动系统支架相连。
The pump comprises mainly of pump body, cover, impeller, shaft, seal ring, intermediate support, sealing and suspension assembly, etc.
泵主要由泵体、泵盖、叶轮、轴、密封环、中间支架、密封和悬架部件等组成。
A special support style of drive shaft is described, which prevents the shaft from transferring rotary moment and being subject to bending moment at the same time.
介绍了一种特殊的传动轴支撑结构型式，它的优点在于避免轴既要传递转矩，又要承担弯矩。
Can be used to increase the size of the core shaft, allowing to play the role of the support spring.
可以使用加大芯轴的尺寸，允许同时起到支承簧圈的作用。
This structure improves the support rigidity of the rocker shaft and the dynamic characteristics of the valve drive system, and reduces the number of components and the number of working man-hours.
这样的结构改善了摇臂轴的支撑刚度以及阀驱动系统的动力性能，并且减少了零件的数量和人工的工时数量。
Bearing shaft through bearing support: turning, is the heaviest part and load easily worn-out parts.
轴承：转轴通过轴承支撑转动，是负荷最重的部分，又是容易磨损的部件。
The mounting shaft has a front-end portion extending through the support base.
在安装轴的前端部分，通过支持基础延伸。
Moreover, the wheel support is fitted with a flange with an upper articulation point connected to the cervical arm and a lower articulation point that is connected to aforementioned shaft.
此外，按摩轮支架装配有具有上铰接点和下铰接点的凸缘，其中上铰接点连接至所述颈臂，下铰接点连接至上述轴。
The invention discloses a bi-axial swivel mechanism in electronic apparatus, wherein a support shaft is received in a socket for relative rotation.
本发明公开了双轴旋转设备及采用其的电子设备。其中，支撑轴承接在插套中用于相对转动。
On the other hand, the fact that the cervical arm is connected to the support shaft by means of a flange serves to facilitate other suitable pivoting actions.
另一方面，颈臂通过凸缘连接至支架轴这一事实有利于其它适当的枢转运动。
Installed from underside of pump support plate to top of pump casing, accurately registered to maintain rigid and permanent alignment with any shaft length.
从泵的支撑板下面向泵外壳顶部安装，准确记录以保持与任何轴长永久对准。
The shortcomings of this method is easy to welding deformation of the chain of boxes, at both ends of the coaxial shaft tolerance and lack of support strength.
此法缺点是焊接后链条箱易变形、两端轴的同轴度超差以及支撑强度不够。
This, combined with its open architecture and standard off-the-shelf products, helps provide improved usability and support over traditional line shaft drive control.
结合其开放式构架和标准原料产品，这样就帮助提供改善了的可用性而且支持传统的动力轴驱动控制。
Based on plastoelasticity mechanics and surrounding rock-supporting principle, the stability of shaft was analyzed, and calculation formula of stress, displacement and support thickness were derived.
根据弹塑性力学及围岩-支护相互作用原理，分析了竖井稳定性，推导了竖井围岩与支护的应力、位移以及支护厚度的计算公式。
An integrative support system of different kinds of gear-shaft parts is devised on the basis of straightening theory and statistics data.
针对现有不同种类的齿轮轴零件，在统计数据的基础上，依据校直理论设计了组合支撑结构。
He illustrates that torque on intermediate support and transmission output shaft is related to the arrangement of intermediate support, and measures to keep them in good condition.
笔者根据汽车传动轴的布置形式，对传动轴的中间支承和变速器输出轴的受力特性给予分析。
According to the invention, the table (1) is mounted to an armrest of the armchair by means of a support (4), said support containing a hollow shaft (5).
根据本发明，通过一支架(4)将书写板(1)安装到扶手椅的扶手上，所述支架包含一中空轴(5)。
According to the invention, the table (1) is mounted to an armrest of the armchair by means of a support (4), said support containing a hollow shaft (5).
根据本发明，通过一支架(4)将书写板(1)安装到扶手椅的扶手上，所述支架包含一中空轴(5)。
应用推荐