Experiment results indicated that the servo controller possesses the characteristics of good speed control performance and anti-load-disturbance ability.
实验结果表明，所设计的伺服驱动控制器具有良好的速度控制能力和抗负载扰动能力。
The results of experiments show that the ac servo system based on fuzzy control has quick response speed, high steady accuracy and good robustness.
实验结果表明基于模糊控制的交流伺服系统具有较快的响应速度、较高的稳态精度和较强的鲁棒性。
Meanwhile, the speed regulation, position detection and feedback, movement coordination of each joint in the servo control system of this manipulator are described in the article.
并就机械手伺服控制系统的速度调节、位置检测与反馈、各关节动作的协调等方面的设计作了说明。
The designed grey feedback linearization control system was implemented in an indirect field-oriented induction servo motor to track speed commands.
设计的灰色反馈线性化控制系统可以实现间接磁场定向感应伺服电机来跟踪速度给定。
The results of experiments show that ac servo system based on fuzzy PID control has quick response speed, high steady accuracy and good robustness.
实验结果表明，基于模糊pid控制的交流伺服系统具有响应速度快、稳态精度高和鲁棒性强等特点。
This paper mainly introduces the IC automatic machine through using Delta B2 series servo, greatly improves the speed and precision of control system.
本文主要介绍了IC自动排片机通过采用台达B2系列伺服，大幅度地提高了系统的速度和控制精度。
The results of experiments show that AC servo system based on integral partition PID control has quick response speed and h.
实验结果表明，基于积分分离PID控制的交流伺服系统具有响应速度快、稳态精度高等特点。
The algorithm also combines correlation matching with the control characteristic of servo system, selects the matching area more reasonably, and thus enables a faster servo control speed.
算法还将相关匹配与伺服系统的控制特性结合起来进行考虑，更加合理地选择匹配区域，从而允许更快的伺服控制速度。
This paper presents a new adaptive fuzzy control scheme and its application to speed servo control for a quadruped robot.
本文提出一种新的模型参考自适应模糊控制器，并应用于步行机器人关节速度伺服控制。
Servo electrical motor impelled camera to move, and PLC carried on speed control and accurate localization.
由伺服电机带动相机移动，由PLC进行速度控制及精确定位。
The combination of speed control and location control of servo driver realized the accurate control of crane's location and steeve's movement.
采用伺服驱动器的速度控制和位置控制相结合的方法实现天车定位和吊臂运动的精确控制。
We need to add the controller in order to enhance the control precision and response speed of DVD focus servo system, and then a new emendation arithmetic was put forward.
为了提高DVD聚焦伺服系统的控制精度和响应速度需要加入控制器，提出了一种新的校正算法。
Servo motor control system Imported from Japan Panasonic, provide accurate displacement and speed control.
进口松下电机伺服控制系统，提供精确位移及速度控制。
This paper describes performance indexes, structure features, design method and experimental investigation of electrohydraulic servo motor with super-low-speed, wide speed control and high precision.
本文介绍了超低速、宽高速、高精度电液伺服马达的性能指标、结构特点、设计方法和试验研究。
It is shown in the experiment that this object function converges rapidly, and could improve both the learning speed and robustness of such speed servo control system.
通过实验研究，表明该方法收敛速度快，学习能力强，并提高了系统的鲁棒性，证实了其在电机速度控制中的有效性。
The fuzzy control is used to ensure the dynamic response speed of the position servo system, and the integral control is used to ensure its steady-state performance.
在系统的动态过程中，利用模糊控制的快速响应能力保证位置随动系统具有较快的动态响应速度；
The dynamic hybrid, using a new type of mixer, servo motor control, speed adjustable, and the noise is very small.
选用动态混合时，采用新型混合器，伺服电机控制，转速可调，而且噪音很小。
The results of experiments show that the robotic visual servo system based on fuzzy control has quick response speed, high steady accuracy and good robustness.
实验结果表明基于模糊控制的机器人视觉伺服系统具有较快的响应速度和较强的鲁棒性。
In the previous studies, Central oscillation, asymmetry of left and right movement and insufficient precise and speed of response are the main problems of electro-hydraulic servo control unit.
在以往的研究过程中，主要发现电液伺服控制单元在零位时存在振动，左右行程不对称，精度和快速性达不到使用要求的问题。
The results of experiments show that AC servo system based on DRNN PID control has quick response speed, high steady accuracy and good robustness.
实验结果表明，基于对角递归神经网络整定的PID控制的交流伺服系统具有响应速度快、稳态精度高和鲁棒性强等特点。
The result of test shows that under different tracking speed, the servo control system using this algorithm all features high control accuracy and excellent dynamic performance.
试验结果表明，基于该算法的伺服控制系统在不同跟踪速度下均具有较高的控制精度和良好的动态性能。
The servo system can accommodate small diameter wire or narrow strip material and can precisely control any combination of direction, speed, or distance required of the application.
这款伺服驱动器可以调节金属丝或窄金属条，也可以精确控制方向，速度或距离的任意组合。
Velocity loop servo system with fuzzy PID controller, correcting PID parameters instantaneously using fuzzy control, improved response speed, control accuracy and robustness of the system.
对伺服系统速度环采用模糊PID控制器，利用模糊控制实时修正PID参数，提高了系统的响应速度、控制精度以及鲁棒性；
The servo control system combines position loop, speed loop, current loop with algorithm of space vector pulse width modulation(SVPWM).
系统采用位置、速度和电流环三环控制，并结合空间矢量脉宽调制（SVPWM）算法。
This paper introduces the connection of speed servo adjusting unit and the throttle, simplifies the control circuit of the manual throttle and offers two practical methods of speed testing.
介绍伺服调速及油门机构的连接，简化手油门控制电路，给出两种实用的测速方法；
Servo control system, high precision, fast speed, improve the efficiency of doing word.
伺服系统控制、精度高、速度快、提高做字效率。
A fuzzy PID control method was presented which controls the pneumatic actuator servo position system using high-speed switching valves.
针对气动系统的非线性，提出一种模糊pid控制算法，使用高速开关阀，对气动执行器进行伺服定位控制。
In this paper, a pneumatic actuator position servo system is described, which controlled by a five-point switch PWM control method using high-speed switching valves.
本文使用一种五点开关pwm控制算法对高速开关阀控气动执行器进行位置伺服控制。
In this paper, a pneumatic actuator position servo system is described, which controlled by a five-point switch PWM control method using high-speed switching valves.
本文使用一种五点开关pwm控制算法对高速开关阀控气动执行器进行位置伺服控制。
应用推荐