This paper presents a digitized DC motor position servo control system based on DSP.
提出一种基于数字信号处理器（DSP）的全数字直流位置伺服控制系统。
In the servo control system, the operation efficiency and the interpolation quality are improved.
该方法提高了上下位机的运行效率，改善了插补质量。
We design the servo control system of the bending joint based on the proportional servo technology.
基于比例伺服技术，设计了弯曲关节的伺服控制系统。
This paper introduces an AC servo control system based on the design of CPLD and analogue controller integration.
交流伺服控制系统的组成本文所设计的交流伺服控制系统是用于数控机床上的进给驱动系统。
Model reference fuzzy control (MRFC) is introduced for a classical thrust vector electrohydraulic servo control system.
针对典型的推力矢量电液位置伺服系统提出参考模型模糊控制控制方法(MRFC)。
High sensitive electromagnetic valve control the flow of water, the servo control system, the operation is extremely simple.
高灵敏电磁阀控制水流，随动控制系统，操作异常简便。
The paper also gives a case of the electro-hydraulic position servo control system to prove the validity of the proposed ILC.
本文还给出了提出的迭代学习控制律在一个电液位置伺服控制系统中的应用实例，来验证算法的有效性。
Recently, position servo control system has been widely used in most fields like NC machine tool, machining center, robot etc.
近年来，位置伺服控制系统已经在精密数控机床、加工中心、机器人等领域得到了广泛的应用。
The servo control system combines position loop, speed loop, current loop with algorithm of space vector pulse width modulation(SVPWM).
系统采用位置、速度和电流环三环控制，并结合空间矢量脉宽调制（SVPWM）算法。
Firstly, we select the proper elements by static design, and the basic frame of the electric hydraulic servo control system is built up.
首先，通过静态设计选择合适的元器件，搭建起液压伺服控制系统的基本框架。
Based on the attributes of different errors, the method for transferring miss distance measurement error in servo control system is given.
在考虑不同误差属性的基础上，给出了脱靶量测量误差在伺服控制系统中的传递方法。
It introduces the recently-developed BKD series of distance-controlled servo control system of variable-section automobile plate spring mill.
介绍了近年研制的BKD系列程控汽车变截面板簧轧机的伺服控制系统。
According to the requirement of test operation and the non-linearity and uncertainty, this paper brought out the pressure servo control system.
给出了针对试验操作要求及钻压伺服系统的非线性、不确定性的钻压伺服控制系统。
The CAT system for electrohydraulic servo control system based on virtual instruments was introduced. The structure of system is based on PC-DAQ.
介绍了虚拟仪器技术并采用虚拟仪器实现了电液伺服控制系统的计算机辅助测试。
The purpose of this paper is researching intelligent two-axis AC servo control system based on CAN BUS in the background of rotary scream printing .
本课题的目的是研究以圆网印花为工程背景的基于CAN总线的智能双轴交流伺服控制系统。
Because of the need of the digital control in the Angle servo control system, it is necessary to improve the traditional Angle servo control system.
随着角位置伺服控制系统中对数字化的需求，必须对传统的角位置伺服控制系统进行改进。
The emphasis is application research of position servo control system in squirming robot based on pneumatic columnar elastic shell actuator in this article.
本文的重点是基于气动橡胶驱动器的蠕动机器人位置伺服控制系统的应用性研究。
Based on the development situations of the pneumatic servo control technique, the main research was also aimed at the PWM and PCM on-off servo control system.
阐述了常规气动伺服控制系统研究的现状，认为以PWM和PCM调制方式为主的开关伺服控制技术仍然是研究的热点。
In this paper, a servo control system is designed based on fuzzy control technology, and then a fuzzy control algorithm with parameter adaptation is presented.
本文提出了一种基于模糊控制技术的伺服控制系统，并设计了尺度变换比例因子自适应调节的模糊控制算法。
Based on engineering practices, this paper studies and designs an advanced and well-functioning AJC hydraulic servo control system for hot rolling mill's coiler.
结合工程实际，研究并设计了一套先进实用的热轧带钢卷取机ajc液压伺服控制系统。
The main content of this thesis is to design an electric hydraulic servo control system which is adapted to the speed regulation of the horizontal screw decanter.
本课题主要是根据卧螺离心机的特点，设计研究适于卧螺离心机调速要求的电液伺服控制系统。
The system uses electro-hydraulic moment servo control system to simulate wave torque and PID algorithm to control. The result of simulation is up to the requirement.
本系统用电液力矩伺服控制系统来模拟海浪力矩，采用PID算法进行控制，其仿真结果符合要求。
It is shown in the experiment that this object function converges rapidly, and could improve both the learning speed and robustness of such speed servo control system.
通过实验研究，表明该方法收敛速度快，学习能力强，并提高了系统的鲁棒性，证实了其在电机速度控制中的有效性。
In the view of the control system, the paper discuss hardware architecture, software architecture, interface architecture, data communication, and servo control system.
文章从系统角度讨论了卷簧机数控系统的硬、软件构成，界面结构，数据通讯及伺服控制。
At present, ac servo control system has widely applied in automation area, for example NC machine, steel rolling equipment, paper making equipment and weave machine etc.
目前，交流伺服控制系统已经广泛应用于数控机床、轧钢设备、造纸设备、纺织设备等自动化领域。
The paper mainly focus on the experimental research on pneumatic on-off valve motor position servo control system with PCM control method and self-adjusting PID algorithm.
文章主要研究的内容为利用PCM控制技术，采用自适应PID控制算法，对开关阀式气动马达位置伺服系统进行实验研究。
Meanwhile, the speed regulation, position detection and feedback, movement coordination of each joint in the servo control system of this manipulator are described in the article.
并就机械手伺服控制系统的速度调节、位置检测与反馈、各关节动作的协调等方面的设计作了说明。
Meanwhile, the speed regulation, position detection and feedback, movement coordination of each joint in the servo control system of this manipulator are described in the article.
并就机械手伺服控制系统的速度调节、位置检测与反馈、各关节动作的协调等方面的设计作了说明。
应用推荐