This system was composed of industrial control computer, PCL-832 servo-type motor control board, servo-type amplifier, servo-type valve and hydraulic motor.
该系统主要由工业控制计算机、PCL—832三轴伺服马达控制板、伺服放大器、伺服阀、液压马达等组成。
The position servo system it USES STD bus module type more CPU structure, mainly for economical nc machine tools.
本位置伺服系统它采用STD总线模块式的多cpu结构，主要面向经济型数控机床。
Mathematical model of adaptive variable structure of control system for DC servo robot was established with nonlinear sliding mode formed with saturation type scalar functions.
采用饱和型标量函数构成非线性滑模建立直流伺服机器人控制系统的自适应变结构数学模型。
A novel piezoelectric type nozzle flapper hydroelectric servo valve was developed and its control method was researched.
提出了一种新型压电晶片型喷嘴挡板式电液伺服阀，并对其控制方法进行了研究。
The stepping motor is extensively used as the executive mechanism in the feed servo system of economical type NC lathe.
在经济型数控车床的进给伺服系统中，广泛地采用步进电机做为执行机构。
The researches of this paper are very important and significative job to improve precision of servo-control system of three axis optical tracking test table even all type of electric simulator tables.
本论文的研究对于提高三轴光学跟踪试验转台以至于所有电动仿真转台的伺服控制系统的精度来说，是一项十分重要和有意义的工作。
Application of dynamic high type control method in the servo system of O-E theodolite is discussed in detail in the dissertation. A method differing from the former is brought forward.
本文深入探讨了动态高型控制方法在光电经纬仪跟踪伺服系统中的实际工程应用，提出了一种不同于前人的动态高型控制方法。
The dynamic hybrid, using a new type of mixer, servo motor control, speed adjustable, and the noise is very small.
选用动态混合时，采用新型混合器，伺服电机控制，转速可调，而且噪音很小。
This paper proposes a new type position controller with neural network structure, gives it 's learning rule, and do the simulation experiment on position servo system of NC machine.
本文提出了一种新型的神经网络结构的位置控制器，给出了该控制器的学习算法，并进行了数控机床位置伺服系统的仿真实验。
Developed a new type of piezoelectric bending actuator used as electrics-to-mechanics converter of a piezoelectric hydroelectric servo-valve.
研制了一种压电弯曲元件型压电驱动器，该驱动器用于电液伺服阀的电-机械转换器。
NC servo spindle features new type step motor applying fine divide method to servo system controlled by single chip micro computer.
采用新型步进电机的数控主轴头，并将细分技术用于单片微机控制的伺服系统。
The structure consists of the electrohydraulic servo and a rotary blade type steering engine device;
其结构由电液伺服器和转叶式舵机装置所组 成；
The new type servo valve can be used in the vibration test bench, the fatigue test bench, and the various hydraulic control systems which need fast response characteristics.
新型伺服阀可以应用于振动试验台、疲劳试验台及需要快速反应的流体控制系统中，可提高系统的快速响应特性。
The principle and design characteristic of a kind of new type ac servo motor which is no need for the external position sensor and has the feature of few slots are studied detailedly.
详细研究了一种新型无需外配位置传感器、少槽交流伺服电动机的原理和设计特点。
A new type of servo brake which provides a increased brake torque by a roller and a wedge structure, whose advantages are its ideal force on brake shoes and even wear, has been developed.
研制了一种利用滚柱并通过楔形结构实现制动增力的新型增力式车轮制动器，该结构可使制动蹄受力合理、磨损均匀，为中、重型汽车采用液压制动提供了有效的途径。
This paper proposed a fuzzy sliding PD-type position controller for vector controlled induction motor servo drive.
针对矢量控制交流感应电机伺服系统，提出并设计一种模糊滑模pd型位置控制器。
This paper presents an analysis and methods of calculation for the static and dynamic characteristics of a low cost moving-coil high pressure type electrohydraulic servo valve.
本文介绍一种成本低的动圈式高压电液伺服阀的静、动态特性的计算与分析。
Servo-drive type feeding, large scale digital transmitted.
伺服驱动，大规模数据传输。
This paper presents a new type of Electronic Servo valve (ESV) which includes the pulse width modulator, electro-mechanical actuator and variable section area valves.
本文介绍了一种新型的电子伺服活门。它由脉冲调制器和机电作动器以及变截面活门组成。
Experiments demonstrate that the proposed detection methodology can be applied to on-line detect robustly and rapidly the abrupt and drift type faults of the servo.
实验表明，该检测方法能快速有效地检测出舵机的小幅值突变和缓变故障。
Based on this principle, a rapid servo nc unit is designed for B2116 heavy duty gantry type planing - milling -grinding machine. This paper introduces its principle and main technical problems.
本文介绍了用于B2116大型龙门刨铣磨床的快速随动数控单元，阐述了其工作原理及主要技术问题。
Utilizing GMM to design new-type actuator, replacing traditional actuator such as the torque motor or the force motor, will enhance the response speed and precision of electro-hydraulic servo valve.
利用GMM设计新型的电—机转换器，取代传统型电—机转换器，如力矩马达或力马达等，可提高整个电液伺服阀的响应速度和控制精度。
Utilizing GMM to design new-type actuator, replacing traditional actuator such as the torque motor or the force motor, will enhance the response speed and precision of electro-hydraulic servo valve.
利用GMM设计新型的电—机转换器，取代传统型电—机转换器，如力矩马达或力马达等，可提高整个电液伺服阀的响应速度和控制精度。
应用推荐