In this paper, a DC brushless motor servo-control system based on DSP is designed.
本文设计了一种基于DSP的直流无刷电动机伺服控制系统。
Cutting Power: USES the imported servo-control technology, fast in speed, low in noise but long in service life.
裁剪动力：采用进口伺服控制技术，速度快，噪音小，寿命长。
In this control loop, on account of giving consideration to both the rapidity and precision of position servo-control, we designed a fuzzy controller.
为了兼顾位置伺服控制的快速性和精确性，在本环节设计了一个模糊控制器。
The position accuracy of machine tool is directly affected by the servo-control method which should be properly selected to ensure the high position accuracy of a CNC system.
伺服控制方法是影响机床定位精度的关键因素之一，要保证数控系统的高定位精度，应采用合理的伺服控制方法。
Digital servo-control technology based on DSP and CPLD is used to solve airborne application problems of optical-electronic sensor: isolating vibration of airplane and tracking pilot helm.
采用基于DSP和CPLD的数字化伺服控制技术解决光电传感器的机载应用问题：隔离机体的高频振动并随动于驾驶员头盔。
Parallel multi-roller straightener is an important equipment in the materials straightening industry. But high-precision straightener with hydraulic position servo-control can hardly be made in China.
平行多辊矫直机是材料平整工业中十分重要的设备，但高精度液压位置伺服控制矫直机国内还很少。
We design the servo control system of the bending joint based on the proportional servo technology.
基于比例伺服技术，设计了弯曲关节的伺服控制系统。
Due to the large torque coefficient, small torque ripple and ease of control, permanent magnet synchronous motor (PMSM) system has been widely used in many accurate servo control systems.
永磁同步电动机系统具有力矩系数大、力矩波动小以及控制灵活等优点，在许多精密伺服控制系统中得到广泛应用。
This decoder can be used in the DVD servo control chip and meets the requirement of the expected performance.
该设计应用于DVD伺服控制芯片中，达到了预期的性能要求。
Servo valves are very important for servo control systems.
伺服阀是伺服控制系统中的重要元件。
The article presents the application of servo control in the conveying system of transfer press, particularly describes the operating principle and composition of servo control system.
介绍伺服驱动控制技术在多工位压力机的输送系统上的应用情况，重点介绍伺服控制系统的工作原理及组成。
This paper investigates the method for implementing visual servo control of robotic micromanipulator.
本文介绍了实现微操作机器人视觉伺服控制的方法。
Servo control in optoelectronic tracking system is one of the key technologies to realize the high precision tracking.
光电跟踪系统中的伺服控制技术是实现高精度跟踪的关键技术之一。
Based on the attributes of different errors, the method for transferring miss distance measurement error in servo control system is given.
在考虑不同误差属性的基础上，给出了脱靶量测量误差在伺服控制系统中的传递方法。
And the interpolation arithmetic, curve contrail programming and servo control are done by computer.
而相应的插补运算、曲线轨迹规划、伺服控制算法等都由计算机来完成。
This paper presents a digitized DC motor position servo control system based on DSP.
提出一种基于数字信号处理器（DSP）的全数字直流位置伺服控制系统。
The algorithm also combines correlation matching with the control characteristic of servo system, selects the matching area more reasonably, and thus enables a faster servo control speed.
算法还将相关匹配与伺服系统的控制特性结合起来进行考虑，更加合理地选择匹配区域，从而允许更快的伺服控制速度。
The pedestal drives a cuboid antenna, which can pitch and roll to direct at target accurately, and is driven by servo control.
该分体式天线座通过伺服控制来实现天线的俯仰和横滚运动，从而准确地指向目标。
The bench tests proved that the return ability of the EPS system under rapid steering had been greatly improved by this servo control technique.
台架性能试验验证表明，采用这种伺服控制方式，电动助力转向系统快速回正时的平稳性有所提高。
Servo control systems are widely used within much more industrial applications, mainly based on embedded systems or servo control CARDS.
伺服控制系统广泛应用于各个工业领域，其控制器解决方案主要有嵌入式系统和伺服控制卡两种。
This paper presents a new adaptive fuzzy control scheme and its application to speed servo control for a quadruped robot.
本文提出一种新的模型参考自适应模糊控制器，并应用于步行机器人关节速度伺服控制。
Meanwhile, the speed regulation, position detection and feedback, movement coordination of each joint in the servo control system of this manipulator are described in the article.
并就机械手伺服控制系统的速度调节、位置检测与反馈、各关节动作的协调等方面的设计作了说明。
Robot visual servo control is a fundamental research subject with very important theoretical research sense and industry application prospect.
机器人视觉伺服控制是一个具有重要理论研究意义和广阔工业应用前景的基础性研究课题。
The paper analyzes the principle of components of magneto optical disk driver focusing and tracking servo system, then designs and realizes a DSP based digital servo control system.
分析了磁光盘驱动器聚焦与循轨数字伺服系统各组成部分的原理，并设计和实现了一套基于DSP的数字伺服控制系统。
Recently, position servo control system has been widely used in most fields like NC machine tool, machining center, robot etc.
近年来，位置伺服控制系统已经在精密数控机床、加工中心、机器人等领域得到了广泛的应用。
In this paper, a servo control system is designed based on fuzzy control technology, and then a fuzzy control algorithm with parameter adaptation is presented.
本文提出了一种基于模糊控制技术的伺服控制系统，并设计了尺度变换比例因子自适应调节的模糊控制算法。
The performance of servo control system determines the reliability and stability of VTR (video Tape Recorder), and enables ultimately VTRs to record and replay video signal accurately.
伺服控制系统的优劣决定着录像机的可靠性及稳定性，是录像机得以正确记录和重放视频信号的根本保证。
The performance of servo control system determines the reliability and stability of VTR (video Tape Recorder), and enables ultimately VTRs to record and replay video signal accurately.
伺服控制系统的优劣决定着录像机的可靠性及稳定性，是录像机得以正确记录和重放视频信号的根本保证。
应用推荐