Plug the in-vehicle temperature sensor wire harness connector into the instrument panel wire harness.
插车内温度感知器线束接头进仪表板线束接头。
The lead wire and its protective layer of the sensor shall be of one-piece construction, and its connection with variable conveying module shall subject to the Manufacturer's standards.
传感器引线及其保护层应为一体化结构，与变送器模块的连接应采用厂家提供的标准。
The vibrating wire sensor works on its vibrating frequency functioning with the tension on it.
振弦式传感器是基于钢弦频率随钢丝张力变化的原理而工作的。
As a traveling sensor, It has taken the place, in many fields, of non contact differential transformer and precise wire wound potentiometers.
作为一种位移传感器，在许多领域取代了无接触式差动变压器和精密线绕电位器。
To guarantee good quality of butt laser welding with filler wire, a gap width detecting sensor and a wire feeding system has been designed.
本文针对高质量板材对接填丝激光焊的需要，设计了对缝间隙宽度检测的传感器与送丝控制系统。
But the distributed capacitance of connecting wire and the temperature have a bigger effect on the accuracy of this kind sensor, the increase of the sensor's precision was constrained.
但这种传感器的准确性受连接导线分布电容和温度的影响较大，从而制约了电容式油量表测量精度的提高。
In the thesis, wireless sensor network application for hydro-generator condition monitoring, break through the mode of wire centralized monitoring model which is widely used now.
本文将无线传感器网络应用于水轮发电机组状态监测中，突破了目前流行的有线集中监测模式。
The length of lead wire of the temperature sensor shall depend on location of the senor as provided in the corresponding data sheet.
温度传感器引线的长度应根据相应的数据单中提供的传感器安装位置来确定。
A new type magnetic sensor using near-zero magnetostriction cobalt-based amorphous wire was studied in the paper.
本文研究了利用具有近零磁致伸缩系数钴基非晶态合金丝研制的新型磁场传感器。
The basic principle on electrical current measurement by electro-thermal conversion was enunciated and a kind of sensor which was made of electric wire and resistance was introduced.
阐述了采用电热转换方法测量电流的基本原理，介绍了利用电热带和热电阻构成的传感器。
Two-wire operation digital signal is the key in magnetic heading sensor.
在磁航向传感器中，两线制数字信号的传输是极为关键的技术。
The system adopts 1-Wire sensor net and RS485 transmission net technique.
系统采用单总线传感器网络和RS485传输网络的设计思想。
The nonlinear relation between the measured force and the frequency of vibrating wire sensor always severely affects the measured performance.
振弦式传感器被测力与输出频率之间是一种非线性关系，它严重影响了传感器的测量性能。
The wireless data transmission system which is composed of wireless data transmission device nRF24L01 and high-precision 1-Wire bus digital temperature sensor DS18B20, is introduced in this paper.
介绍一种由nRF24L01型无线数据传输器和高精度的单总线数字温度传感器DS18B20组成的无线数据传输系统；详细阐述该系统的硬件和软件设计要点；
Very long thermocouples are okay (even 100m), but if there is measurement stability issues or USB resets, ferrite beads can be added to the thermocouple wire close to the Phidget Temperature Sensor.
可以接受很长的热电偶（100公尺都不成问题），如果测量稳定度的相关问题或USB重设，磁珠（ferrite bead）可以加于热电偶电线靠近PhidgetTemperatureSensor 的部分。
The thermal resistance of the heating part (temperature sensor) is made of metal wire even double wound on the insulating material on the skeleton.
热电阻的受热部分(感温元件)是用金属丝均匀地双绕在绝缘材料制成的骨架上。
This test results show that the method of equidistance subdivision can highly improve the resolution of the image sensor and the measurement accuracy of the wire tiny diameter.
实验结果表明：采用插值细分的方法能够提高图像传感器的分辨力和细丝直径的测量精度。
This means that the sensor needs not even a single wire, nor a battery that would have to be replaced.
这意味着这个传感器甚至可以不需要电池和电线。
You may see a square mud-yellow components attached to your motor wire, that is a sensor that you might have triggered during your run, and it will cut all power to the motor.
在你的电机上可能有一个泥黄色的电路保护零件， 把它焊走了应该能解决问题。
The working principle of sensor based on hot wire is described.
介绍了热线式传感器的工作原理。
When using pulse counting method, the precision of pressure-measuring with vibrating-wire sensor is influenced by the precision of pulse counter, circuit noise, temperature compensation, etc.
应用振弦式传感器并基于脉冲计数法进行压力测量可达测量精度受脉冲计数精度、电路噪声及温度补偿等多重因素影响。
Under special circumstance, it is required that the sensor, protective layer of lead wire and the variable conveyor casing shall be electrically insulated from the ground.
在特殊情况下，要求传感器、引线的保护层与变送器外壳及地保持电气绝缘。
The vibrating-wire monitor sensor is led through conversion into the auto acquisition system, for the first time, to expand the monitoring scope of the auto observation system.
首次将钢弦式监测仪器传感器通过转换引入自动化采集系统，扩大了自动化监测系统的监测范围。
The wiring rod driving motor, the position sensor of the wire winding rod, the shift driving motor, and the position sensor of the stator clamping tool are respectively connected with a controller.
线杆驱动电机、绕线杆位置传感器、转位驱动电机和定子夹具位置传感器均与控制器连接。
In the paper, the electro-mechanical analogy method is briefly introduced by analysis the vibrating wire sensor, and have a correlation analysis about the circuit we used.
本文通过对振弦式传感器的分析介绍了机电类比法，并对使用电路进行了相关的分析。
A novel type of vibrating wire sensor with single coil and raster is described.
介绍一种新型振弦式传感器：智能型单线圈光栅式振弦传感器。
The hot-wire air flow sensor is a kind of sensor that can measure the mass flow of air directly.
热线式流量计是一种可以直接测量空气质量流量的传感器。
Connection heads provide a protected, clean area for mounting a terminal block or transmitter as part of the transition from temperature sensor assembly to lead wire.
连接头为终端嵌块或者发射机提供一个受保护的、洁净的区域，从温度感应器到引线。
These sensors have a separate wire beside the two wires for powering the sensor.
这些传感器在两条供电线路外还有一条单独的线路。
A frequency measuring system which is designed in accordance with the working principle of a vibrating-wire sensor is mainly composed with a portable frequency measuring device and a PC.
根据振弦式传感器工作原理而设计的测频系统主要由手持式测频仪和PC计算机组成。
应用推荐