To increase the reality of a virtual camera in sensor simulation, this paper proposes a camera simulation method based on a linear calibration model.
为了提高传感器仿真中虚拟摄像机的仿真真实度，该文在标定算法线形模型的基础上，提出一种基于标定技术的虚拟摄像机仿真方法。
By applying the method to the target identification, the simulation experiment shows that it can identify the target accurately and is an effective and feasible multi-sensor data fusion method.
将该方法用于一个目标识别任务的仿真实验，结果表明应用该方法能确定地识别出目标，是一种有效可行的多传感器数据融合方法。
Simulation shows that this method is easily implemented and can objectively reflect the reliability degree of each sensor without knowing any prior information.
仿真结果表明，该方法实现简单，能够客观地反映各传感器的可靠程度，不需要知道任何先验信息。
Simulation results show that, in the case of multiple sensor faults in the navigation system, this method can effectively detect them and accurately identify their parameters.
仿真结果表明，针对导航系统中多个传感器同时发生故障的情况，此方法能有效检测故障，并能准确识别故障参数。
At last, by using the hybrid simulation system, some algorithms of star map identification and performance of star sensor could be effectively verified by dynamical and statical test in this platform.
最后利用所构建的半物理仿真系统，对星图识别算法和星敏感器性能进行了静态和动态的试验。
Vision simulation concerns technologies such as the computer graph, multimedia, artificial intelligence, man-machine interface, the sensor, parallel calculations.
视景仿真技术是汇集了计算机图形学、多媒体、人工智能、人机接口、传感器、高度并行的实时计算等多项关键技术。
Simulation result shows that the algorithm can effectively deal with real-time sensor scheduling under the circumstance of multiple objects, and it is better than other intelligent algorithms.
仿真结果表明该算法有效地解决了多目标情况下的传感器实时调度问题，并优于一般的智能算法。
Simulation results show that adding a few appropriate super links to a wireless sensor network can significantly reduce the average path length and then improve the energy efficiency.
仿真表明，在无线传感器网络中适当增加少量的超级链路可以减少节点的平均能量消耗，明显减小平均路径长度并改善网络的能量高效性。
It can be shown that the data-centric routing protocol can save energy and prolong the lifetime of large-scaled and dense wireless sensor networks by simulation and mathematical approaches.
通过数学分析和仿真方法得知，在大规模高密度无线传感器网络中以数据为中心的路由协议能更有效地节约能量，延长网络的生命周期。
An algorithm for distribution of sensor resources is given which is optimized by principle of maximum synthesis efficiency. Simulation results of this algorithm are given at last.
最后以综合效能最大为最优准则，提出了传感器分配的算法，并给出仿真结果。
The simulation results demonstrate that EHC can be better applied in heterogeneous sensor networks.
实验结果表明，EHC能够很好的应用于异构传感器网络。
With the help of simulation, the optimally designed resonant cavity type wetness sensor has acquired good high-frequency electromagnetic as well aerodynamic characteristics.
通过仿真，本文优化设计的谐振式湿度测量传感器具有良好的高频电磁性能和气动性能。
Effectiveness of the method in networks training speed, anti-interfering ability and identifying veracity of sensor faults are proved by simulation and model test of conditioning system.
通过仿真和空调系统模型试验证明了该方法在网络训练速度，抗干扰能力及各种传感器故障识别准确率等方面的有效性。
According to the result of simulation and characteristic of monocrystalline silicon SOI structure, a novel high temperature SOI pressure sensor with a rectangle diaphragm was designed.
根据模拟结果并结合单晶硅材料和SOI结构的特点，设计出了矩形应力膜单晶硅soi高温压力传感器芯片。
This paper brings forward a multisensor management application model in wireless sensor network, and proves the validity of this model by primary simulation.
文中提出了一个无线传感器网络中多传感器管理的应用模型，并进行了初步的仿真实验。实验证明了该模型的有效性。
The simulation for CSTR shows that the presented approach can isolate and estimate the multiple sensor faults quickly and accurately and the integrated system has tolerantability to sensor faults.
对连续搅拌釜式反应器（CSTR）的仿真结果表明，该集成故障诊断方法能够对多重传感器故障进行快速准确的分离和估计，并对传感器故障具有容错性。
Simulation results illustrate that this method can immediately and effectively detect, isolate and accommodate sensor failures, no mistake and failure reports were found.
仿真结果表明，所研究的方法能及时、有效的检测到故障传感器，并对其进行隔离和重构，没有发生误报和漏报现象。
Simulation test results show that this method may reduce the uncertainty of individual sensor data and enhance systems, capacities of discernment to targets.
仿真实验结果表明，该方法可以减少单一传感器的不确定性，增加结果的可分离性，从而提高系统对目标的识别能力。
Multidimentional scaling map algorithm is employed to achieve node localization in wireless sensor networks, and quantitative analysis depends on different simulation parameters is provided.
使用多维标度定位算法对无线传感器网络中的节点进行定位，并且根据不同的仿真参数给出定量的分析结果。
The flow field of the drainage cover of the sensor was simulated by using a fluid mechanics simulation software, the feasibility of drainage cover structure design was validated.
运用流体力学仿真软件对传感器排水罩的排水效果进行了流场模拟，验证了排水罩结构设计的可行性。
With the analysis of the Environment Multi-sensor Data Fusion process in, this thesis brings out the simulation testing system structure, and describes function of its every module.
通过对多传感器信息融合处理环境的分析，给出了仿真测试系统的总体结构，对各模块的功能进行了描述。
Electric field of capacitive angular sensor are analyzed by finite element methodology. Sensors with different dimensions are studied by simulation. The result is proved by the experiment.
该文利用有限元法对电容式角位移传感器三维电场进行分析，仿真研究不同结构参数的敏感元件，所得结论与实验结果吻合。
A prototype simulation platform has been constructed with COTS components, on which the above mentioned multi-sensor management hierarchy is simulated and its effectiveness is verified.
采用商用货价产品技术(COTS)构建原型仿真平台，对提出的多传感器管理系统体系结构进行原型仿真，验证了该设计的有效性。
The mechanical property and electricity property of the vacuum micro electronic pressure sensor is studied and relevant computation and simulation are carried out.
研究了真空微电子压力传感器的力学和电学特性、传感器结构及相应的计算与模拟。
The earth simulator is an important ground simulation test and precision calibration equipment for infrared earth sensor which is the key component in the satellite controlling system.
地球模拟器是卫星姿态测量控制关键部件—摆动扫描式红外地球敏感器的一种重要地面模拟试验与精度标定仪器。
Mathematical simulation results show that the improved method can identify and orientate dual sensor soft fault more exactly and quickly than the traditional method.
数学仿真验证了改进方法比传统方法更能够及时准确地识别双余度传感器缓变故障。
The simulation results show the approach can be easily carried out and has the rapid convergence rate, which can estimate the biases of single maneuvering sensor.
仿真结果表明，该方法实现简单，收敛速度快，可以实现单部动基座传感器的偏差估计。
How to use the program PSPICE to simulate nonlinear circuits formed by diffusion resistors in pressure sensor and analyze the simulation results compared with experiment are discussed.
本论文主要讨论怎样利用PSPICE软件模拟压力传感器中由扩散电阻形成的非线性电路。
How to use the program PSPICE to simulate nonlinear circuits formed by diffusion resistors in pressure sensor and analyze the simulation results compared with experiment are discussed.
本论文主要讨论怎样利用PSPICE软件模拟压力传感器中由扩散电阻形成的非线性电路。
应用推荐