For the control system to work, sensor sampling and control must be performed at periodic intervals.
为了保持控制系统的正常工作，传感器的采样与控制必须按照一定的周期间隔。
LOTHAR (Land Optronic thermal Aiming Resource) is a multi sensor system specifically designed for Fire Control Systems equipped with the "Tilde" thermal camera (ir cooled).
Lothar系统是一种多传感器系统，专为配备“蒂尔德”热成像仪(红外制冷)的火控系统设计。
The fire control system combined the sensor data, generated accurate targeting coordinates, and simulated a target shootdown with a virtual ground-based interceptor.
火控系统与传感器数据结合，生成精确的目标坐标，然后模拟出路基拦截器击落目标的过程。
The control of driving motor module and ultrasonic sensor module are realized in the system.
实现了对机器人驱动电机、超声传感等任务模块的系统控制。
GOCE, with its sensor, system of supporting instrumentation and control elements, actually forms a single composite gravity-measuring device.
GOCE及其传感器、仪表支持系统和控制元件，实际上构成了一个单一的综合重力测量装置。
VR system is composed of inspect and test module, feedback module, sensor module, control module, 3d module and modeling module.
VR系统由检测模块、反馈模块、传感器模块、控制模块、3d模块和建模模块构成。
Air compressor constant pressure gas supply intelligence control system is by the transducer, pressure sensor, programmable controller (PLC) control unit, software control unit etc.
空气压缩机恒压供气智能控制系统是由变频器、压力传感器、可编程控制器(PLC)控制单元、软件控制单元等组成。
The result shows that the algorithm, which has better adaptability, can fulfill the demand of fault tolerant control in fault system with single sensor failure.
结果表明，该控制策略可以满足有单个传感器失效的故障系统容错控制要求，具有更强的适应性。
It introduces a design and implementation of constant temperature control system which based on L4960 single chip switching integration manostat and AD590 temperature sensor.
介绍了基于单片开关式集成稳压器l 4960和温度传感器ad590的一种恒温控制系统的设计和实现方法。
BP networks on fault diagnose of sensor used on generator speed control system of Marine is introduced.
介绍了BP网络用于船舶发电机转速控制系统传感器故障诊断的方法。
In its control system, the ultraviolet radiation sensor and photoresistor are used to form a detector to track the sun with solar energy modules.
控制系统采用紫外线传感器和光敏电阻组成对太阳光线的探测器，实现了太阳电池组件对太阳的跟踪。
The system design and implementation methods of timing control circuit for a new CMOS image sensor are proposed.
本文主要论述了CMOS图像传感器时序控制电路的系统设计和实现方法。
Based on performance of real-time and closed loop feedback flight control system, a set of robust adaptive observers are set up for sensor fault isolation and reconfiguration.
考虑到飞行控制系统闭环反馈及实时的特性，设计了多个鲁棒自适应观测器用于传感器的故障隔离与重构。
The working principle and implementation method for rector control system of non-speed sensor with 80c196 are introduced.
并介绍了一种由80c 196实现的无速度传感器矢量控制系统的工作原理及实现方法。
Generally speaking, in the PMSM (Permanent-magnet synchronous motors) control system, mechanical sensor on the rotor shaft is required to detect the position and speed of the rotor.
一般来说，在电动机调速控制系统中需要在转子轴上安装机械传感器，测量电动机的速度和位置。
The system design and implementation methods of timing control circuit for anew CMOS image sensor are proposed in the paper.
本论文主要论述了CMOS图像传感器时序控制电路的系统设计和实现方法。
Hardware circuit part of control system mainly includes controller, sensor, and motor driver chip.
控制系统的硬件电路部分主要包括控制器、传感器和电机驱动芯片。
For a vector control of a speed sensor less induction motor drive system, a novel speed estimated method using an extended Kalman filter is proposed.
本文针对无速度传感器异步电机矢量控制系统，提出了一个基于卡尔曼滤波器的异步电机速度辨识方法。
In a word, we integrate into the system the advanced technology of computer, communication, control, sensor, measurement and database.
综上所述，该系统融合了计算机、通讯、控制技术，以及先进的传感技术、测量技术和数据库技术。
This system consists of control cell, sensor, mathematical model, control algorithm, and computer and technological process.
本系统由控制单元、传感器、数学模型、控制算法、计算机及工艺过程组成。
To keep the capability of control process, the control system of thermodynamic system must be able to detect sensor failure and take related measures.
大型热力系统的控制系统必须能够检测传感器故障，并采取相应的措施，保证控制过程的顺利进行。
It was mainly composed of the (vibrating) sensor, the temperature control system, the pressure control system, and the signal adjust system.
振动丝黏度仪主要包括振动丝传感器、温度控制系统、压力控制系统和信号调节系统。
This paper introduces the software and hardware design of CAN intelligent sensor node, which is used in a distributed motion control system.
介绍了应用于某分布式运动控制系统的CAN智能传感器节点的软硬件设计。
An experimental device was designed and established to detect seam automatically employing vision sensor, stepper motor driver and the industrial PC control system.
本课题通过一套焊缝跟踪实验装置，采用视觉传感、步进驱动和工控机控制系统，来实现焊缝的自动识别控制。
The whole of this robot included dynamic system, mechanical system and control system. This control system mainly included PIC single chip, motor drive circuit, and sensor module.
该机器人由动力系统、机械系统和控制系统组成，其控制系统主要由PIC单片机、电动机驱动电路和传感器模块三部分组成。
This robot consists of dynamic system, mechanical system and control system. The control system mainly includes PIC single chip, motor drive circuit and sensor module.
该机器人由动力系统、机械系统和控制系统组成，其控制系统主要由PIC单片机、电机驱动电路和传感器模块三部分组成。
The SH1 is equipped with a computerised fire-control system, with a muzzle velocity sensor which feed the data directly to the fire-control computer.
SH 1装备一套计算机火控系统，用一个炮口速度传感器直接反馈数据到火控计算机。
This paper gives a design of sensor-less direct torque control system based on DSP (TMS320LF2407A). The hardware and software schemes are introduced.
提出了一种基于DSP（TMS320LF2407A）无速度传感器直接转矩控制系统，给出了硬件设计和软件设计方案。
The star sensor is a measuring unit used for providing information to the attitude control system on spacecraft .
星敏感器是为空间飞行器姿态控制系统提供姿态信息的测量系统。
The control system are consisted of computer, laser sensor, A/D converter and the power driver of output etc.
实验系统由计算机、激光传感器、A／D转换器及输出功率驱动器等实验装置组成；
应用推荐