The results indicate that the semi-solid slurry with much finer and uniformer primary phase particles is gained by self-inoculation method.
结果表明，通过自接种法得到具有更细的单相颗粒的半固体泥浆。
Semi-solid processing in a new material formation technique.
半固态加工技术是新的材料成形技术。
The final vegetable oil product will be a semi-solid ingredient at ambient temperatures.
在室温下，最终的植物油产品呈现半固态。
So the composite has sensitivity of strain rate during compression in semi-solid interval.
复合材料在半固态区间压缩时具有应变速率敏感性。
The squeezed-casting formability of AZ91D magnesium alloy in semi-solid state was studied.
研究了AZ91D镁合金在不同半固态温度下的挤压铸造。
The shaped mechanism of semi-solid ZA27 alloy is changed along with different shaping temperatures.
随变形温度的不同，半固态ZA27合金呈现不同的变形机理。
It has been proved to be a simple model, which can represent the deformation behavior of semi-solid alloys.
该模型形式简单，能够较好地描述半固态合金的变形行为。
The temperature collect and control system for electric heating furnace in Semi-Solid Metal Processing is introduced.
介绍了半固态金属加工中使用的电加热炉的温度采集与控制系统。
The results show that the ceramic coating on semi-solid forging mould can improve the service life of the mould remarkably.
试验表明，在半固态金属加工模具内表面用静态法制备陶瓷涂层，将显著提高模具的使用寿命。
With the rise of temperature in squeeze process, the Theological property of semi-solid magnesium alloy slurry was improved.
在半固态挤压成形过程中，随着成形温度的升高，镁合金半固态浆料的流变性改善。
This paper researched the refining and spheroidization mechanics of the semi-solid grains of AZ91D magnesium alloys by SIMA.
本文利用sima法，对细化和球化AZ 91 d镁合金铸件晶粒的机理作了细致的研究。
Result of research shows that proper technology of induction heating satisfies the technologic request in semi-solid metal forming.
研究结果表明，适当的感应加热工艺能满足金属半固态成形技术中的二次加热的技术要求。
Features, principles, substance and present situation of research and application of semi-solid forming of EMS have been summarized.
文章综述了电磁搅拌技术的特点、原理和实质，以及当前电磁搅拌技术的研究及应用现状。
The result shows that the technology of semi-solid strip casting and rolling can improve plastic processing property and refine grain.
结果表明，半固态连续铸轧技术可以提高板带的塑性加工性能，细化晶粒。
But the remaining facades are wrapped with a semi-solid surface comprising vitrified ceramic tiles fixed to a stainless-steel wire lattice.
但是剩下的立面包裹着一个半立方体面，由釉面陶瓷瓷砖粘贴在不锈钢金属网格上而构成。
Semi-solid forming is one of new types of material processing. This paper analyses the present and the future of this new forming technology.
半固态加工是金属材料成形领域中的一种新工艺。本文分析了铝合金半固态成形技术的现状及发展趋向。
Semi-solid metal forming technology is a new metal forming technology and it is a forming technology with enormous developmental potentiality.
半固态金属成形技术作为一项新兴的金属成形技术，是一种具有巨大发展潜力的加工技术。
It establishes the study foundation for metal matrix composites prepared by infiltration-stamp forging in semi-solid state integral technology.
新工艺为金属基复合材料压力下浸渗半固态模锻成形一体化工艺奠定了研究基础。
Due to the special properties of semi-solid metal, it provides a possibility for metal near net shaping with high efficiency and low consumption.
半固态成形具有加工温度低，变形抗力小的特点，为高效低能实现金属近净成形提供了现实可能。
A die with internal lining ceramics coat was made by using this technology. Then a semi-solid aluminum alloy forming experiment was made in the die.
应用自蔓延技术制备了带有陶瓷内衬涂层的模具，并应用该模具进行了简单的半固态铝合金加工实验。
The mechanical property of the hypoeutectic high chromium cast iron extrusion samples was analyzed after extruded by semi-solid rheocasting forming.
分析了亚共晶高铬铸铁半固态浆料进行流变挤压成形后挤压件的力学性能。
Semi-solid slurry of A356 alloy is prepared by compound process, and the fractal characteristic of morphology in semi-solid primary phase is studied.
利用复合工艺制备了A356铝合金半固态浆料，研究了半固态A356铝合金初生相形貌的分形特征。
The solidification modes of liquid phase of semi-solid AZ91D Mg alloy were in close relationship with the degree of supercooling determined by cooling rate.
AZ 91d镁合金半固态液相的凝固方式与冷却速度所决定的过冷度有重要关西安理工大学硕士学位论文系。
The research prog ress of semi-solid forming magnesium alloys at present was reviewed in this paper, and the prospect of its industrial application was viewed.
综述了目前国内外镁合金半固态成形技术的研究及其应用现状，展望了镁合金半固态成形技术在我国的发展前景。
Research method and main results is as following: Using electrical resistance furnace and cooling slope to melt A356 aluminum alloy and gain the semi-solid slurry.
研究方法和主要成果如下：使用电阻炉熔炼a356铝合金，并采用斜坡冷却法进行半固态熔体的制备。
Compression experiments were carried out to investigate deformation behavior and microstructure of semi-solid ZL101 alloy fabricated by controlled crystallization technique.
研究了控制熔体结晶法制备的半固态zl101合金的压缩变形行为以及显微组织的变化。
It is important to study deformation behavior, deformation mechanism and microstructure evolution of semi-solid alloys because the semi-solid alloy has special characterization.
由于材料在半固态下具有特殊性质，开展其变形行为、变形机理和组织演化等方面的研究显得尤为重要。
It is important to study deformation behavior, deformation mechanism and microstructure evolution of semi-solid alloys because the semi-solid alloy has special characterization.
由于材料在半固态下具有特殊性质，开展其变形行为、变形机理和组织演化等方面的研究显得尤为重要。
应用推荐