Dislocations consist of screw dislocation and edge dislocation.
位错有螺位错和刃位错。
The stresses inside and outside the core of a screw dislocation are obtained.
得到了螺位错芯区内、外的应力场。
The screw dislocation in the film strongly influences the properties of the YBCO.
在薄膜中的螺旋位错强烈地影响YBCO的性质。
The elastic interaction between a screw dislocation dipole and a mode III interface crack is investigated.
研究了多晶体材料中螺型位错偶极子和界面裂纹的弹性干涉作用。
This paper is concerned with the behavior of a screw dislocation in a half-plane piezoelectric composite medium.
研究了半平面压电复合介质中螺位错的性能。
The interaction between piezoelectric screw dislocation and circular crack under remote uniform heat flux was investigated.
研究压电材料在均匀热流作用下螺型位错与圆弧裂纹的相互作用。
Its explicitly explained how the cleavage step pattern is formed by the cleavage crack intersecting with screw dislocation.
本文对解理台阶的形成模型——解理裂纹与螺位错交割模型进行了诠释。
The moving problem of a screw dislocation at subsonic velocity in a transversely isotropic piezoelectric medium is considered.
考虑横观各向同性压电材料中螺位错的亚音速运动问题。
This paper investigates the problem of the elastic interaction between a screw dislocation dipole and a circular interface crack.
该文研究了螺型位错偶极子和圆形夹杂界面裂纹的弹性干涉作用。
The image force acting on the piezoelectric screw dislocation and the generalized stress on the surface of rigid line are calculated.
导出了作用在位错上的像力和刚性线夹杂表面剪应力和电位移的解析表达式。
In the fourth chapter, the interaction among a screw dislocation, circular interfacial crack and inclusion under remote uniform heat flux is derived.
第四章分析压电材料在远端均匀热流场下螺型位错、圆形界面裂纹与夹杂之间相互作用的问题。
The variation of screw dislocation forces for correlative material parameters and different radians of crack or rigid line is discussed particularly.
并讨论了位错力随材料相关参数，非理想界面参数，裂纹和刚性线弧度的变化规律。
Based on the nonlinear geometry field theory of continuum mechanics, this paper analyzes the stress field due to a screw dislocation in an infinite medium.
本文以非线性连续体几何场论为理论基础，分析了无限大体中一个螺位错引起的应力场。
The interaction effects between the circular interfacial cracks and the screw dislocation located inside the matrix under longitudinal shear are dealt with.
研究了无穷远纵向剪切下圆形弹性夹杂界面裂纹与基体中任意位置螺型位错的相互干涉问题。
The problem for the interaction between a uniformly moving screw dislocation and interface rigid lines in two dissimilar anisotropic materials are investigated.
研究了压电材料中压电螺型位错和共线界面导电刚性线夹杂的电弹干涉效应。
The solutions of the researched problems are obtained by solving screw dislocation solution and steady state temperature field solution of correlative problem in this paper.
本文主要通过求解相应问题的螺型位错解和稳态温度场解来获得所研究问题的解。
The electroelastic interaction between a piezoelectric screw dislocation and an elliptical inclusion containing an electrically conductive interfacial rigid line is investigated.
研究了无限大压电基体材料中压电螺型位错与含界面导电刚性线椭圆夹杂的电弹耦合干涉问题。
Column in the same horizontal line, the high speed rail board installation is very easy, convenient, otherwise there will be a phenomenon of screw dislocation, can not be installed.
立柱在同一水平线后，高速护栏板的安装也就非常容易、便捷了，否则会出现螺丝错位的现象，无法安装。
As a result, analysis and discussion show that the influence of interfacial crack or rigid line inclusion on the interaction between screw dislocation and inhomogeneity is significant.
分析结果表明，界面裂纹和刚性线夹杂对螺型位错与夹杂的干涉作用具有强烈的扰动效应。
In the second chapter, the interaction among a screw dislocation, circular interfacial crack and inclusion is solved based on the electromechanical coupling relation of piezoelectric material.
第二章基于压电材料的机电耦合关系求解螺型位错、圆形界面裂纹与夹杂之间相互作用的问题。
The interaction among a screw dislocation, circular inclusion and interface crack or elliptical inclusion and interface crack under remote uniform heat flux is mainly researched in this paper.
运用共形映照、解析延拓以及柯西型积分运算等复变函数方法研究无限大平面中楔型向错偶极子与界面裂纹、圆形夹杂的弹性干涉问题。
This experimental phenomenon proves that the screw phase dislocations evolve into a new type of dislocation—edge phase dislocation with the optical field propagating.
实验上验证了带有相反拓扑指数的光学涡流中的螺旋位错在传播过程中会演变为边位错这一理论结果。
Objective: To observe and measure the Sacro-iliac joint and correlative parts for clinical reference in Hemipelvic dislocation internal fixation by double head hollowed screw.
目的：通过骶髂关节及相关的解剖观测，为半盆脱位骶髂关节穿钉固定术提供临床应用依据。
Methods a dislocation was separated into pure edge part and pure screw part and their superposition was used to find the elastic field.
方法通过将位错分解为刃型和螺型分量，该位错引起的整个弹性场可由两个分量所引起的弹性场叠加得到。
Objective To investigate the outcome of trans-scaphoid perilunar dislocation treated with bone anchor and AO/ASIF hollow screw.
目的探讨骨锚和空心钉联合应用于经舟骨月骨周围脱位的临床疗效。
Under the same axial compression load, the dislocation of the pedicle screw in AFC group was apparently less than that in fixation group.
在相同轴向压缩载荷作用下，AFC组椎弓根钉受力移位较内固定组明显减小。
Objective To evaluate the function of the cervical spine anterior screw-plate system in the early operation of cervical spine fracture and dislocation.
目的：评价颈椎前路钉板系统在早期颈椎前路手术中的作用。
Objective: to explore the clinical efficacy and imaging assessment of posterior arthrodesis with pedicle screw fixation in the treatment of atlantoaxial instability or dislocation.
目的：探讨后路寰枢椎椎弓根钉固定技术治疗寰枢椎不稳或脱位的临床疗效及影像学评估。
Objective: to explore the clinical efficacy and imaging assessment of posterior arthrodesis with pedicle screw fixation in the treatment of atlantoaxial instability or dislocation.
目的：探讨后路寰枢椎椎弓根钉固定技术治疗寰枢椎不稳或脱位的临床疗效及影像学评估。
应用推荐