The paper introduces principle of scanning electronic microscope briefly;
简要介绍了扫描电子显微镜的工作原理；
The fibrous material images are captured from a scanning electronic microscopy(SEM).
该文所处理的纤维材料图像由扫描电子显微镜获取。
The ommatidial surface ultrastructure of ommateum of 6 butterfly species were observed with scanning electronic microscope.
利用扫描电子显微镜观察了6种蝶复眼小眼面的表面结构。
And the worn surfaces morphologies of the reinforced PTFE composites were examined with scanning electronic microscopy (SEM).
利用扫描电子显微镜对材料的磨损表面进行了观察和分析。
By scanning electronic microscope (SEM) it was tested for the interfacial state and morphological structure of different composites.
应用扫描电子显微镜(SEM)分别对不同复合材料进行了界面形态和微观结构的研究。
The anatomic and surface structures of the seed coat of 3 species of Soja are observed under the light microscope and the scanning electronic microscope .
在扫描电镜和光学显微镜下分别观察了黄豆亚属3种植物种皮的表面结构和解剖结构。
The failure of the powder metallurgy valve seat was analyzed by optical microscopy, scanning electronic microscopy, X-ray energy spectrum and X-ray diffraction.
采用力学、物理性能测试，金相、扫描电镜、能谱和X衍射分析研究了气门座圈产品失效的主要原因。
SEM (scanning electronic microscope) was adopted to observe the morphologies of the oxidized alloys. The wear resistance and corrosion resistance property were assessed.
采用扫描电子显微镜对膜层进行了形貌分析，并对氧化处理前后样品的耐磨性和耐蚀性进行了测试分析。
Under scanning electronic microscope, four kinds of metal structure may be observed including black core phase, white core phase, gray ring phase and white adhesion phase.
在扫描电子显微镜下可观察到四种金相组织：黑色芯相、白色芯相、灰色环形相和白色粘结相。
Eyes were enucleated at 24 HRS and 1 week after injection. Light microscopy, transmission electronic microscopy (TEM), and scanning electronic microscopy (SEM) were performed.
注射后分别在24小时和1周摘除眼球做光镜、透射电镜和扫描电镜检查。
By means of stereomicroscopy and scanning electronic microscopy (SEM), the fracture mode and mechanism of the broken K18 superalloy cast blade in a supercharger turbo were investigated.
采用体视显微镜、扫描电镜等分析手段对K18合金增压器涡轮铸造叶片的断裂形貌与断裂机制等进行了分析。
By using visual examination, scanning electronic microscope, X-ray energy spectrum and metallurgy and chemical analysis, the cause of crack occurred in bellow expansion joint was analyzed.
采用宏观检查、扫描电镜、X射线能谱、金相分析及化学分析等方法，对金属波纹膨胀节开裂的原因进行了分析。
The x-ray diffraction (XRD), x-ray photoelectron spectroscopy (XPS)and scanning electronic microscopy (SEM)were employed to analyze the structure, composition and surface morphology of the films .
用x射线衍射（XRD）、扫描电镜（SEM）和x光电子能谱（XPS）对样品进行了结构、形貌及组分分析。
Structures and properties of these materials were studied by X-ray diffraction (XRD) analysis, scanning electronic microscopy (SEM) observation and differential scanning calorimetry (DSC) analysis.
并采用X—射线衍射分析、扫描电镜和差热差重分析，研究了复合蓄热材料的性能和结构。
The effects of polymer concentration and agitation rates on the size of microspheres and drug incorporation efficiency were studied by scanning electronic microscopy (SEM) and UV-spectrophotometry.
利用扫描电镜和紫外光谱考察了内相聚合物浓度和搅拌速度对微球粒径和药物包封率的影响。
Scanning electronic microscopy showed that cells with spindle shape spread on PGA fiber.
扫描电镜可见细胞在PGA纤维上生长良好，呈长梭形。
Scanning electronic microscope is used to check the fracture form of swing arm trier and energy spectral analysis is done in special area.
利用扫描电镜考察摇臂试验品的断口形貌，对个别区域进行能谱分析。
A study has been made on the stability of fertility transformation of HPGMR Nong-Ken 58a and its pollen morphology under Scanning Electronic Microscopy.
对HPGMR农垦58A进行育性转换的稳定性研究，用扫描电镜观察其花粉外部形态。
Pollen morphology of 10 plant species in tessellated meadow of Inner Mongolia was observed and described particularly under Scanning Electronic Microscope(SEM).
本文通过采用扫描电镜（SEM），对内蒙古五花草塘10种植物的花粉形态进行了详细的观察描述。
The surface defects of silver COINS was analysed with auger electron spectroscopy (AES), Scanning electronic microscope (SEM) and energy dispersive spectrum (EDS).
采用扫描电镜、能量色散谱和俄歇电子能谱检测方法，对银币表面缺陷进行了分析。
The samples were characterized by X-ray diffraction (XRD), Scanning electronic microscope (SEM), photoluminescence (PL) and X-ray excited luminescence (XEL) spectra.
分别以X-射线衍射（XRD）、扫描电子显微镜（SEM）、光致发光（PL）光谱及X-射线激发的发光（XEL）光谱对样品进行了表征。
The observation of Scanning Electronic Microscope (SEM) on a shankbone shows that the bone is a kind of natural bioceramic composite consisting of hydroxyapatite and collagen protein.
扫描电镜观察显示胫骨是一种由羟基磷灰石和胶原蛋白组成的自然生物陶瓷复合材料。
Scanning Electronic Microscope(SEM)and EDAX were used to analyze the surface defect of mandril for hot rolling steel tube. Appearance and growth of the surface defect were investigated and discussed.
采用扫描电镜及能谱分析对热轧管用失效芯棒的表面缺陷进行分析，探讨了芯棒表面缺陷的产生原因和长大机理。
The reasons of hot cracking susceptibility are analyzed through electronic-scanning, electronic-probing and energyspectrometric methods on the patterns of fracture surface of hot crack and base metal.
利用扫描、电子探针及能谱分析技术，从母材、热裂纹断口形貌等方面分析了8090合金热裂纹敏感性高的原因。
The reasons of hot cracking susceptibility are analyzed through electronic-scanning, electronic-probing and energyspectrometric methods on the patterns of fracture surface of hot crack and base metal.
利用扫描、电子探针及能谱分析技术，从母材、热裂纹断口形貌等方面分析了8090合金热裂纹敏感性高的原因。
应用推荐