A comparative test between green sand mold casting method and resin sand-coated iron mold casting method was conducted.
介绍了球铁刹车盘的不同铸造工艺，对粘土砂湿型铸造工艺和覆砂铁型铸造工艺进行了试验对比。
During this month, I learned lathe work, miller operating, benchwork, digital control processing, sand mold casting, heat treatment, and welding.
在一个月中，我们学习了车工，铣工，钳工，数控加工，沙型铸造、热处理、焊接等等。
Simulation results show that grain size is smaller for metal mold casting, but larger for sand mold casting, which is in good agreement with the experimental results.
模拟结果表明，金属型铸造晶粒尺寸较小，砂型铸造的较大。模拟结果与金相观察结果相符。
The additive of correcting metal penetration for green sand mold casting, made from the waste of oil further fabricated——namely DK material, is researched in this paper.
研制了利用植物油深加工后的废料———DK材料作为铸造用湿型砂防粘砂添加剂。
Effect of low freqency vibration on solidified behavior of ferro-carbon alloy was inspected in sand-mold Casting.
本文研究了在普通砂型条件下，低频振动使铁碳合金凝固组织的影响。
Because the mold is formed around a one-piece pattern (which does not have to be pulled out from the mold as in a traditional sand casting process), very intricate parts and undercuts can be made.
由于这种铸型是环绕整块型模形成的(无需像传统的砂型铸造工艺那样拔模)，能制作十分复杂的零件和浮雕。
Mold material of rapid sand casting is one of important factor for realizing rapid sand casting.
快速砂型铸造用模具材料，是实现快速砂型铸造的重要因素。
One method to make casting sand mold directly from the bozzetto (mud draft) of the sculpture is introduced.
介绍一种在雕塑泥稿外直接制作铸造砂型的方法。
In order to improve the abrasion-resistant on the casting surface, the low-Cr cast iron matrix composite reinforced by WC particles in sand mold was made in the experiment.
为了提高铸件表面的耐磨性，实验以低铬铸铁为基体，WC颗粒为增强体，制备出颗粒增强表面耐磨复合材料。
Precision injection molding, casting, mold repair metal jewelry and accessories, precision stampings, welding, lost wax castings, aluminum castings, stainless steel sand hole repair.
精密注塑、压铸、模具的修补金属饰品及配件、精密冲压件的焊接、失蜡铸件、铝铸件、不锈钢产品砂孔修补。
The green sand mold with even density and proof of the impact of liquid metal is one of the critical factors in the production of quality casting.
紧实度均匀、能抵抗金属液体冲击的合格砂型是保证铸件质量的关键因素之一。
The use of vibration and impact to the mold casting equipment in separation of molding sand and casting.
利用振动和冲击使铸型中的型砂和铸件分离的铸造设备。
If a hollow casting is to be made the pattern will include extension pieces so that Spaces to accept the sand core are molded into the sand. These additional Spaces in the mold are termed core prints.
如果铸造空心铸件时模型上包含伸长杆便于在砂中放置砂芯的空间称为型芯座。
Casting quality and rejection rate are remarkably affected by the quality and property of molding sand, in the process of clay sand green mold casting.
在粘土砂湿型铸造中，型砂质量和性能对铸件质量、废品率有明显的影响。
High-Kun Industry Co. , Ltd. The company was founded in 1978, has more than three decades, the company specializes in producing shell mold sand brains and heart sand casting shell mold.
高昆工业有限公司本公司创立于西元1978年，至今已逾三十年，本公司专业生产壳模砂心机和壳模砂心铸造。
The experience of cast Mg alloy in graphite green sand mold was summarized and its casting characteristics were analyzed.
总结了采用石墨砂湿型铸造镁合金的经验，分析了镁合金铸造的特点。
This standard is applicable to carbon steel castings of sand casting and casting mold casting which owns equivalent thermal conduction with sand mold.
本标准适用于在砂型铸造或导热性与砂型相当铸型铸造的一般工程用铸造碳钢件。
We can also adopt sand shell moulding or metal mold casting as for allotype castings.
对异形铸件，还可用砂型铸造或金属型铸造。
Abstract: One method to make casting sand mold directly from the bozzetto (mud-draft) of the sculpture is introduced.
文摘：介绍一种在雕塑泥稿外直接制作铸造砂型的方法。
It is easy to adhibit sand on the surface of the casting in the foundry using green sand mold.
粘土砂湿型铸造，铸件表面容易产生粘砂。
The sand-lined metal mold casting technique for bimetallic squeezing axle was investigated. The suitable chemical composition in the white cast iron was to be adjusted.
介绍了双金属榨轴的铁型覆砂铸造工艺，并对榨螺用白口铸铁的化学成分作了适当地调整。
The sand-lined metal mold casting technique for bimetallic squeezing axle was investigated. The suitable chemical composition in the white cast iron was to be adjusted.
介绍了双金属榨轴的铁型覆砂铸造工艺，并对榨螺用白口铸铁的化学成分作了适当地调整。
应用推荐