This product is mainly used for metals and metal products, metal rust surface pretreatment liquid.
本品适用于金属板、带、箱制品表面短期防锈保护。
This preparation consists of sanding away any paint or rust to obtain a smooth but not highly polished surface.
准备工作包括用砂纸打磨，除去油漆和锈迹，以使表面光滑但又不抛得很光。
When such damage comes to the surface of steel and rust occurs, the surface shall be cleaned by power tools to the secondary surface preparation grade and coated as originally painting scheme.
如果钢表面发生上述损坏，产生锈，用电力工具对表面进行清除，处理至二次表面处理等级，涂上一层与原始油漆一样的涂层。
So it is important to discover the original shape of excavated iron antiquities and stabilize the rust of iron surface.
这对恢复出土铁器的面貌及进一步化学稳定转化铁器表面的锈层都具有重要的作用。
First, clear the gap and around the base surface of the dirty debris or water surface rust, scrub clean with a damp cloth.
首先清除缝隙及周边基面的脏杂物或水管表面的铁锈，用湿布擦洗干净。
All non-check fixture AL details surface should be painted medium blue and steel details surface should be treated for rust prevention.
所有非检测用铝件表面应漆成适中的蓝色。 易生锈的钢制零件应进行表面防锈处理。
In a long time stop, remove the pump and dry the parts and coat rust-proof grease on the processed surface.
长期停止使用时，应拆开水泵，将零件上的水擦干，在加工表面涂上防锈油保管好。
Steel surface should be no visible oil, dirt, scale, rust and paint coating and other debris should as far as possible eliminate, any attachments should be strong.
钢材表面应无可见油脂、污垢、氧化皮、铁锈和油漆涂层及其它杂物应尽可能除去，任何附着物均应是牢靠的。
Steel surface should be no visible oil, dirt, scale, rust and paint coating attachments, any markings should be only slight discoloration of dot or stripes.
钢材表面应无可见的油脂、污垢、氧化皮、铁锈和油漆涂层附着物，任何残留痕迹应仅具点状或条纹状的轻微色斑。
The pipe shall be protected with surface paint to prevent pipe rust during transportation for ensuring the quality of pipe during galvanized pipe production process.
镀锌钢管生产工艺中，为保证产品质量，防止运输过程中产品生锈，需对钢管进行表面喷漆保护处理。
Steel surface should be no visible oil, dirt, scale, rust and paint coating and other attached objects, the surface should be showed homogeneous metal color.
钢材表面应无可见的油脂、污垢、氧化皮、铁锈和油漆涂层等附着物，该表面应显示均匀的金属色泽。
If the fog drops appear in the table, should be timely maintenance, wipe the fog water, to prevent water falling, parts rust, surface color.
如果表内出现雾气水珠，应及时检修，擦去雾气水珠，以防进水日久，机件生锈，表面泛色。
Steel surface should be no visible grease and dirt, and there is no attachment not firm scale, rust, paint and other impurities (water soluble salt and welding residue).
钢材表面应无可见的油脂和污物，并且没有附着不牢的氧化皮、铁锈和油漆涂层及其它杂质（水溶性盐和焊接残渣）。
SEM observation showed that the surface of 1420 Al-Li alloy turn colors, and rust spot become bigger after salt corrosion.
电镜扫描观察发现，1420铝锂合金锈点直径较大，且连成片，表面明显变色。
It can remove the rust on the surface of the stainless steel tube, oxide skin, old layers of paint and other dirt.
它能去掉不锈钢管表面的锈、氧化皮、旧的漆层及其他污物。
Steel doors: doors to over rust treated steel plate, the surface of the paint.
钢木门价格：门扇为经过防锈处理的钢板，表面做的烤漆。
Clean dirt (rust, grease etc.) in surface of work-piece with remover.
用清洗剂将被检工作表面的污物(锈，油脂等)清洗干净。
Rust is not thick, can use steel wire brush, steel wire cloth to wipe the surface, until the instinctive quality with stainless steel pipe, reoccupy cotton rub-up.
锈蚀不厚，可用钢丝刷、钢丝布擦拭表面，直至露出不锈钢管本色，再用棉纱擦净。
On steel surface which is removed rust by sand blasting spray, and can be applied on steel surface which is removed rust by hand or machine tools.
它既可用于喷砂除锈的金属表面，亦可用于手工或小型风动工具除锈的金属表面。
Surface finish: Degreasing, rust, rust phosphating, powder coating.
表面处理：脱脂，除锈，防锈磷化，喷塑。
With good flexibility and dust removal, high efficiency and long working life time. Mainly used for polishing the surface of metal, non-metal, removing rust and burr etc.
弹性强，磨削量大，高效，长寿命，主要用于金属、非金属表面的抛光，对复杂型面进行修焊缝、去毛刺、除锈等。
We are the company member of China cleaning Association and the company member of China Surface Engineering and Anti-rust Association.
中国洗净工程技术合作协会会员单位、中国表面工程及防锈协会会员单位。
Aluminium flower pieces by various surface treatment, color bright, luxurious and never rust, is widely used in super five-star hotel, high-end villa, garden villa area and so on.
铝艺花件经多种表面处理，色彩光亮，富丽豪华且永不生锈，被广泛应用于超五星酒店、高端别墅、会所、花园洋房等领域。
This paper expounds the necessity for improving oil and rust removal process on metal surface, as well as its operating mechanism, the whole process, the bath control and its main characteristics.
阐述改进金属表面除油除锈工艺的必要性、工作机理、工艺全过程、槽液控制和主要特点。
Salt spray test machine for a variety of surface materials by electroplating, anodizing, painting, rust-proof oil, anti-corrosion treatment, testing its products on the corrosion resistance.
盐水喷雾试验机针对各种材质之表面经电镀、阳极处理、喷涂、防锈油等防腐蚀处理后、测试其制品之耐腐蚀性。
It enhances rust protection and corrosion resisting property through adopting special surface treatment.
采用独特的表面处理技术，有效提高了产品的抗锈耐蚀性能。
Cleaning the oil stain and rust of the welding surface before welding, choosing suitable welding standard.
焊前须将焊件表面的油污及铁锈清理干净，选择适宜的焊接规范。
This is because once the damage to the surface of the paint, rusty iron products easily, so use that paint off in time with a special "refinish" repair, to avoid rust.
这是因为一旦破坏了表面的防锈漆，铁艺制品很容易生锈，所以在使用中发现漆皮脱落要及时用特制的“修补漆”修补，以免生锈。
This is because once the damage to the surface of the paint, rusty iron products easily, so use that paint off in time with a special "refinish" repair, to avoid rust.
这是因为一旦破坏了表面的防锈漆，铁艺制品很容易生锈，所以在使用中发现漆皮脱落要及时用特制的“修补漆”修补，以免生锈。
应用推荐