Therefore, establishing the precise and practical rolling-force calculation model has become a research project with important applied worth in the continuous rolling-seamless steel pipe field.
因此，建立精确实用的轧制力计算模型，就成为连轧无缝钢管轧制领域内的一个具有重大应用价值的研究课题。
The crown can be controlled by optimum distribution of rolling force.
轧制力的合理分配可以有效控制板凸度。
This paper introduced the development of the online intelligent detecting system of rolling force by LabVIEW software.
本文介绍了一个利用虚拟仪器技术开发的轧制力在线智能监测系统。
On the basis of theoretic analysis and experiment, the new rolling force model has been developed.
通过理论推导和现场实验相结合，建立了新的轧制力模型。
With the monitoring system, the attached type ergometric sensor can be used for the online rolling force monitoring, which proves nice effect.
最后又结合轧机工况监测系统，使用附着式测力传感器对轧制力进行在线监测，证明具有较好的使用效果。
The theory and measurement method of measuring the rolling force are correct and practicable.
用该传感器测量轧制力是正确、可行的。
Balancing system provide proper rolling force with rolling down system.
平衡缸系统配合压下系统提供合适的轧制力。
So, the casting speed plays an efficient role in readjusting the molten steel surface level in pool and rolling force.
铸轧速度是调节熔池液面高度和轧制力的有效手段。
Because of its unique ability to process information, the technology of neural networks is very appropriate for the computing of rolling force.
神经网络技术以其特有的信息处理能力，为轧制力的计算提供了一条很好的途径。
The analysis results supply a theoretic foundation and reference for forecasting rolling force online and working out the regulations of slab siding press.
分析结果为板坯侧压规程的制定和轧制力的在线预报提供了理论依据。
This model provides necessary theoretic basis for 304L stainless steel calculation of rolling force.
该模型可为计算304L不锈钢的轧制力提供理论依据。
Experiment results indicate that the designed rolling force model has better adaptive capability and high prediction accuracy.
试验研究证明，所设计模型具有良好的适应能力，提高了轧制力的预报精度。
The finite element model of HBeam rolling with and without deviation of vertical roller was established. The HBeam head displacement field and rolling force parameters were studied in detail.
利用有限元方法建立了立辊偏移前后H型钢轧制的有限元模型，研究了立辊轴线偏移时H型钢头部位移场和力能参数的变化规律。
The mass scaling method and hourglassing technology were applied in the simulation and the deformed results and rolling force curves of each pass were obtained.
在模拟过程中应用质量放缩、沙漏控制技术，得到了各道次轧件变形结果及轧制力曲线。
Influences of different radial and axial feeding speed on the radial and axial rolling force, growth rate of diameter and temperature have been systematically analyzed and proved by trials.
同时对不同的径向和轴向进给速度对径轴双向复合轧制过程中轧制力，直径增长速率及温度分布的影响进行了系统分析，并进行了相应的实验验证。
Based on the measured data from a hot strip mill, the rolling force in roughing was predicted by means of BP neural networks which adopted two kinds of training methods.
利用BP神经网络，以某热轧厂粗轧机组数据库中的数据为训练样本，采用两种训练方案，对粗轧过程轧制力进行预测。
It was approved that the prediction precision was obviously enhanced compared with the practical data for vertical rolling force.
经与现场实测数据比较，明显提高了立轧轧制力的预报精度。
The simulated rolling force matches the reference experimental data, and therefore the study results provide an important basis for the design of rolling equipment.
轧制力的计算结果与参考的实验数据吻合，能为导体轧制成型设备的研制提供依据。
First, this paper summarizes the mathematic models of rolling force and AGC used in traditional rolling process and the relative methods of modeling. The defects of those methods are pointed out.
首先总结了轧制过程中传统的轧制力数学模型和AGC数学模型及相应的建模方法，指出了它们存在的缺陷和不足。
The models can be used to predict strip surface roughness, arrange steel strip rolling order reasonably, decide the time of work roll off mill and modify the calculation model of rolling force.
这些模型可以用于生产中预测轧后带钢表面粗糙度、合理安排带钢轧制顺序、决定工作辊下机时间和修正轧制力计算模型。
On the basis of the limited conditions, entry thickness, exit thickness, rolling speed, tension, rolling force and rolling torque, etc. are calculated.
根据极限条件，计算出入口厚度、出口厚度、轧制速度、张力、轧制力、轧制力矩等。
The paper gives a rolling force formula of rolling aluminum foil, which indicates actual rolling process and physical deformation.
从铝箔轧制过程的实际出发，提出一个能够反映铝箔轧制过程物理变化规律的计算铝箔轧制力公式。
Basing upon the experimental data, comparison has been made for different deformation schedule in regard to the corresponding rolling force, rolling energy and rolling cycle.
并根据试验所得的数据，对各种变形制度所对应的轧制力，轧制功以及轧制周期进行了比较。
For improving the precision of prediction of rolling model, a new method using artificial neural networks of rolling force modeling is put forward.
为了提高轧制力模型预报值的精度，提出了一种基于人工神经网络的轧制力建模新方法。
To improve the precision and efficiency of rolling force prediction on tandem cold rolling mill, a neural network model combined with ant colony algorithm is presented.
为提高冷连轧机轧制力的预报精度和预报速度，用蚁群算法和神经网络相结合的方法进行轧制力预报模型设计。
The rules of node's temperature change and rolling force with time were analyzed in steady deformed field of slab. The simulation results and experiment results of rolling force show good agreement.
得到了板坯在稳态变形区内节点温度和轧制力随时间的变化规律，通过轧制力的模拟结果和试验数据比较可知，两者吻合良好。
According to this formula of rolling force, through the rolling force and roll flattening radius conditions for decoupling calculation, the explicit calculation expression of rolling force is derived.
针对该轧制力公式，通过对轧制力和轧辊压扁半径条件进行解耦计算，推导出轧制力的显示计算式。
Rolling force is the important parameter for skew rolling process design of anchor rod.
轧制力是斜轧锚杆工艺设计的重要参数，轧制力的变化受到各工艺参数的影响。
In order to control the rolling force, we must build the mathematic model of rolling force.
为了控制铸轧力，必须建立铸轧力控制数学模型。
The rolling force distribution was analyzed to obtain its character which reaches the maximum value in the centre of the rolling zone, while at the entrance and exit, the stress fades away.
对轧制过程中轧制压力分布进行了分析，得到其分布规律为轧制压力在变形区中间区达到最大值，而在入口和出口处逐渐减少。
应用推荐