Splitting force is the key to the process of fracture splitting connecting rod.
裂解力的选择是发动机连杆裂解加工成败的关键。
Through the analyse on the current situation separation process of coarse slime, a new floatation technology about coarse slime separation after rod milling was presented.
通过粗煤泥分选工艺的现状分析，提出对粗煤泥经棒磨后进行浮选的新工艺，并对某厂的粗煤泥进行了可行性试验。
The valve rod (steel 35) is nitrided in the fluid soft nitriding process, the main material being made up of urea.
采用以尿素为主要原料的液体软氨化工艺，对阀杆(35钢)进行了氮化处理。
It can improve the control quality to fit the requirement of a process control system for use with a no oxygen copper rod furnace.
该方案在无氧铜杆炉控制系统投用，使控制性能有较大的提高，能满足生产过程的要求。
Therefore, this structure maintains a consistent rigidity and there is virtually no fiber rod configurational change during the deburring process.
因此，这种结构能够保证去毛刺过程中纤维坚固不变形，保持研磨的一致性。
The temperature field and warming process of the transient and steady state in the laser rod by symmetrical trigonal side-pumping were simulated using the finite element analysis method.
用有限元法计算模拟了三角均匀分布侧面泵浦结构激光棒瞬态温升过程及稳态温度分布情况。
The smelting parameters and continuous-casting process in developing carbon welding rod steel of H08A are introduced, the cause for success and lost is analyzed, some measures proposed.
介绍了宣钢试验碳素焊条钢h 08 A的冶炼参数和连铸工艺，分析了试验成功的原因和失败的教训，提出了解决措施。
The article mainly introduces the hot crimping process and its test methods for the vehicle thrust rod.
主要介绍汽车推力杆的热铆接工艺及其试验方法。
The paper introduces the isothermal quenching process for wirt rod and some significant measures against quenching deformation and provides quality assurance for high grade products.
介绍了盘丝的等温淬火工艺及解决淬火变形的主要措施，为生产一级品提供了质量保证。
In the boring process of deep holes, the insufficient rigidity of the boring rod usually influences the machining accuracy.
在镗深孔加工中，常因镗杆刚度不足而影响加工精度。
Based on different physical and chemical properties of components in synthetic rod, a new purification process for synthetic diamond by gas phase oxidation method is proposed.
根据人造金刚石合成棒中各组分不同的物理、化学性质，提出了一种采用气相氧化法提纯人造金刚石的新工艺。
This method can decrease the costs of the carbon rod using in zinc chloride type paper-lined battery and break a new path for common soaking paraffin process in zinc type paper-lined battery.
本方法降低了锌型纸板电池碳棒的成本，闯出一条锌型纸板电池用的普通碳棒浸蜡工艺的新方法。
The rod wire production process in Tangshan Steel Company was introduced. The problems met in production were analyzed, and the trouble shooting methods were provided also.
对唐钢高速线材厂的生产工艺及生产中出现的问题进行了分析，并提出解决办法。
In the process of milling special spiral rod, a comparative analysis of all kinds of signals that indicate the state of tool wearing has been made.
在异形螺杆铣削过程中，对反映刀具磨损几种信息进行分析比较。
The axial flotation of chuck plays an important role in the protection of rod pipe threads and prevention of rod pipe stripping or cutterhead from dropping during the process of raise boring.
在天井钻进过程中，卡盘的轴向浮动对保护钻杆螺纹和防止钻杆脱扣、刀头坠落等方面具有重要作用。
Taking the model S6120 air compressor as an example, this paper presents the cold extrusion process of connecting rod bushes and measures for improving the tools used in the process.
以S6120型空压机为例，介绍了连杆衬套冷挤压的生产工艺及其所有工具的改进措施。
On the basis of the analysis and derivation, some improvements have been made on the former process and then the failure of drawing rod is much less than before.
在此基础上，对原有生产工艺进行了改进，使生产中引丝失败的情况明显减少。
Production Process: Ptfe rod is made by ptfe resin , using the method of pushing and then sintering.
生产工艺：聚四氟乙烯推压棒由聚四氟乙烯树脂在常温下用推压法成型，再经烧结制成的。
Mechanical property and surface quality of alloyed welding wire rod have been improved on optimizing process parameters.
通过优化工艺参数，提高了合金焊盘条性能和表面质量。
The main production process all kinds of gear, worm gear, sprocket, spline, the long axis, filament rod mechanical parts.
主要制作加工各类齿轮、蜗轮、链轮、花键、长轴、长丝杆等机械配件。
Forming process of combustion welding rod was studied and the best parameters of forming process are following: controllability of the burning with the density of the rod 2.
通过对燃烧型焊条成型过程实验研究，得出最佳成型工艺参数：药粉密度在2。
This article introduces manufacturing technological program of present process equipment (general machine tool mainly) which are applied to connecting rod forging die of D114 diesel engine.
本文介绍了D114柴油机连杆锻模用现有的加工设备(主要是普通机床)进行制造的工艺方案。
In this paper the working principle of electro - spark surfacing is introduced. Surfacing process is applied to restoring hydraulic piston - rod and gains good effectiveness.
主要介绍了电火花沉积堆焊工作原理，应用沉积堆焊工艺修复液压活寒杆，取得了良好效果。
Optimizing control cooling process can make microstructure of wire rod more even and increase torsion number.
通过优化控冷工艺，线材组织更均匀，扭转指标大为改善。
Modeling of crank shaft connecting rod slippery piece mechanism and process of optimization design were introduced, and its optimized result was analyzed and compared.
阐述了曲柄连杆滑块机构的建模、优化设计计算的过程，并分析比较了其优化结果。
The structural characters of steel pipe drilling rod, the signification of welding repair for the rods and the narrow gap welding process and equipment are introduced in the paper.
介绍了钻铤钢管的结构特点、焊接修复的意义，以及窄间隙焊接工艺与设备。
A drawing process for sealing cover of automobile connecting rod and a method of chamfering by punching were analyzed. The die structures designed for the key procedures were introduced.
分析了汽车连杆油封盖拉伸工艺及用冲压成形完成倒角的方法，介绍了关键工位的模具结构。
The injection moulding device comprises a substrate nut (2), a process screw rod (4) screwed into the substrate nut (2), and two positioning nuts (1).
注射成型装置包括基体螺母(2)及旋入基体螺母(2)中的工艺丝杆(4)和两个定位螺母(1)。
The surface temperatures of 304 stainless steel wire and rod during 18 passes hot continuous rolling process was measured.
实测了304不锈钢棒线材18道次热连轧过程各道次的表面温度。
The surface temperatures of 304 stainless steel wire and rod during 18 passes hot continuous rolling process was measured.
实测了304不锈钢棒线材18道次热连轧过程各道次的表面温度。
应用推荐