The flexural buckling of continuous chord with rigid joint;
刚性支座下双轴对称截面连续压杆的弯曲屈曲；
At a rigid joint of a space frame, three resolution and three moment equations can be written.
在空间框架的一个刚性节点处，可以写出三个分力方程和三个力矩方程。
The results show that the stress distribution mechanism of rigid joint of arch foot improved by various measures is more reasonable than before.
计算结论表明：通过优化和改进后的拱脚刚结点局部应力分布机制更趋于合理。
Because the ideal "rigid joint" and "hinged joint" are inexistent, the stiffness of any connection types is between ideal rigid joint and hinged joint.
因为理想的刚节点和铰接点是不存在的，任何连接形式的刚度都是介于理想刚接和完全铰接之间的。
Because the idealistic "rigid joint" and "hinged joint" are inexistent, the stiffness of any connection types is between idealistic rigid joint and hinged joint.
因为理想的刚节点和铰接点是不存在的，任何连接形式的刚度都是介于理想刚接和完全铰接之间的。
The articles are raised about semi-rigid joint in "Code for Design of Steel Structures" (GB50017-2003) promulgated recently. But it has no necessary theoretical help.
《钢结构设计规范》(GB50017- 2003)中对半刚性连接提出了条文要求，但没有必要的理论支持。
The welding seem stress of beam-flange is the major factor which decides the behavior of dog-bone style rigid joint and only the better welding can exert the function of the dog-bone.
梁翼缘处的焊缝强度是决定狗骨式刚性连接节点性能的主要因素，只有具有良好的焊缝质量才能发挥狗骨的作用。
In order to resist the structure's lateral load and reduce the lateral displacement efficiently in the tier or tall building structure, it is generally designed the joint as rigid joint earlier.
早期的多高层建筑钢结构设计，为了能有效地抵抗结构的侧向荷载和降低结构在侧向荷载作用下所产生的水平位移，一般把梁柱连接设计成刚性连接。
In the design of tall building structure, the engineers generally design the joint as so-called "rigid joint" to resist the structure's lateral load and reduce the lateral displacement efficiently.
高层建筑钢结构设计中，工程师们一般都将节点做成所谓的“刚节点”，以抵抗结构的侧向荷载和降低结构在侧向荷载作用下所产生的水平位移。
Result rigid ankle foot orthoses could supply a reasonable motion in three levels control ankle joint plantar flexion varus and valgus and inhabit spasticity.
结果硬踝足矫形器能够在三个平面提供合理的运动控制，能较好地控制踝跖屈、内外翻及抑制痉挛。
In the framework design, different kinds of node are commonly assumed to be rigid or hinge joint, which possess different node characteristics.
在框架设计时，大都假设为刚接或铰接节点，因而节点的受力特性有一定的差异。
The effectiveness of the method is demonstrated through simulation of two flexible-link and flexible-joint 3R robots manipulating a rigid load.
文中就两个具有柔性关节和柔性臂的3R机器人协调操作刚性负载为例，验证了本方法的有效性。
A gymnasium consists of space truss structure and shopping basket shaped truss structure, and the T-type rigid connection joint is adopted when the circular tube is intersected.
某体育馆是由网架结构和落地提篮形桁架组成的杂交结构，圆管相交采用T形相贯刚接节点。
The stiffness matrix of semi-rigid steel frames and the fixed end moment are deduced, based on the connection element method incorporating the effects of joint flexibility.
采用连接单元法，考虑连接柔性的影响，推导出半刚性框架梁柱的刚度矩阵及半刚性梁的固端弯矩。
Methods Patients with knee and hip joint fractures were treated with primary rigid internal fixation, and early intermittent passive and active motion were used.
方法对膝髋关节骨折患者采取早期坚强固定，并于术后早期进行关节的间歇被动活动和关节间歇主动活动。
The results show that the T-type connection joint can be regarded as rigid under some circumstances but the effects of certain joint flexibility on the structure system should be taken into account.
分析结果表明，在一定几何条件下，T形相贯节点可以看作刚接节点，但应考虑一定的节点柔性对整体结构变形的影响。
Because BEM has an advantage in dealing with a rigid or flexible joint, its application in modeling and analysis of mechanical system plays an important part.
而边界元法对于处理机械系统中的刚性和柔性结合部比较方便，因此，运用边界元法对机械系统零、部件及整机进行建模和解析具有非常重要的意义。
The general motion equation of rigid body in gyroscopic theory is used to analyze the motion of double universal joint in the transmission system of engineering mechanism vibration grinder.
用陀螺理论中刚体一般运动的方程对汽车、工程机械、振动磨机等系统中传动系的双万向节进行了运动分析。
In addition, the jointed element has certain thickness, so the calculative parameter can be determined by those of the actual joint. It embodies the improvement to rigid block discrete element method.
另外，节理单元有实际的厚度，可以根据实际节理的性质确定计算参数，这一点也体现出了对刚性块体离散元方法的改进。
The finite element model of the semi-rigid connection between members of frame structures is established in this paper, and it is applied to the model of joint parameters identification.
构造了半刚性结构连接单元，并应用于结构连接参数识别的模型中。
In view of the rigid link flexible joint, the industry mechanical arm which actuates by the flexible planet gear, this paper proposed one kind of new modeling and the computational method.
针对带刚性连接挠性接头、以柔性行星齿轮驱动的工业机械臂，提出了一种新的建模和计算方法。
The joint deformation of DC upset butt welding was studied by using theory of plastic deformation and rigid-viscosity plastic material model.
采用塑性变形理论和刚粘塑性材料模型研究了直流电阻对焊接头的塑性变形。
The present utility model provides an AGC flexible rigid high-pressure oil feeder, comprising pipeline characterized in that it comprises 2 steel tubes and 3 high pressure rotary joint.
本实用新型提供一种AGC可弯式刚性高压供油装置，包括管线，其特征在于该管线由2段钢管和3个高压旋转接头组成。
Therefore , the paper is dedicated to study a new type joint-top and seat angle with double web angles semi-rigid connection.
为此，本文在参照国内外大量文献资料的基础上，致力于研究一种具有优良抗震性能的新型节点一双腹板、顶底角钢半刚性连接节点。
Therefore , the paper is dedicated to study a new type joint-top and seat angle with double web angles semi-rigid connection.
为此，本文在参照国内外大量文献资料的基础上，致力于研究一种具有优良抗震性能的新型节点一双腹板、顶底角钢半刚性连接节点。
应用推荐