Aiming at how to reduce the pump noises, a new type of double acting piston radial pump with lower noises is designed here.
就针对如何降低泵的噪声问题,本人设计出了一种新型的低噪声双作用径向柱塞泵。
Pump axial force and radial force by the rolling bearing box to bear.
泵的轴向力与径向力分别由轴承盒内的滚动轴承来承受。
Bearings shall be specifically selected to carry all radial and axial loads imposed by the pump and motor.
这些轴承都是经过特别挑选,能够承担油泵和电机产生的径向和轴向负载。
Simulation results show that the dynamic characteristic of electro-hydraulic servo controlling radial piston pump using this self-adapting fuzzy PID controller is very good.
仿真结果表明,基于自适应模糊pid控制器的电液伺服控制径向柱塞变量泵具有良好的动态性能。
This article designed a displacement setting mechanism by the fixed quantity of valve model radial column piston as base pump.
以阀式径向柱塞定量泵为基泵设计了控制进油阻力的变量机构。
The principle of hydrostatic pressure bearing is introduced in the paper, the sliding boot of radial piston pump is designed by using principle of hydrostatic pressure bearing.
本文介绍了静压支承原理,并利用静压支承原理对新型径向柱塞泵的滑靴进行了设计。
Simpler equation was educed by using power bond-bound graph for the model founding of the electro-hydraulic proportional radial piston pump controlling system.
用功率键合图对电液比例径向柱塞泵控制系统进行建模,导出一组相对简单的方程。
A virtual modal is developed by focusing on the type of JBP-63 electro-hydraulic control radial piston pump as to fit its working conditions.
以JBP- 63型电液比例控制径向柱塞泵为例,建立了符合其工作情况的虚拟模型。
The imbalance of the radial force of the single action vane pump is a main problem which affects the enhancement of the working pressure.
单作用叶片泵径向不平衡力是影响其工作压力提高的主要问题。
However, the heavier unbalanced radial force existed in the traditional two-gear's gear pump is a chief factor to affect the pump's service life.
但是传统的二齿轮式齿轮泵存在较大的不平衡径向力,成为制约齿轮泵寿命的主要因素。
Aimed to decrease damping coefficient and enhance pump's dynamic performance, a method for reducing the radial plunger pump stator forces was developed by analyzing the type JBP-63 pump stator forces.
为了降低阻尼系数进一步提高泵的动态性能,通过对JBP-63型径向柱塞变量泵定子受力仿真分析,研究了减小径向柱塞液压泵的定子不平衡力的方法。
The clearance between oil distribution axle and rotor of radial piston pump can directly influence the performance and life of pump.
径向柱塞泵配油轴与转子配合间隙直接影响着泵的性能和寿命。
As has been shown in practice, it is a new generation of the radial plunger pump which has new structure and reasonable design.
实践证明,该泵是一种结构新颖,设计合理的新一代径向柱塞泵。
The synchronization gear pump can reduce the radial and boost the work pressure.
同步齿轮泵能够降低齿轮泵径向力,提高齿轮泵的工作压力。
In this paper, a radial piston pump with a revolving outer ring is designed for tidal energy conversion and the static characteristics of the prototype are studied.
针对潮流能水轮机及其能量转换的特点,设计了一种动外壳式海水径向柱塞泵,研究了其静态性能;
The results, which obtained by using radial diffuser, show that due to the high loss through the diffuser, the efficiency of the liquid hydrogen pump is lower.
采用径向导叶的液氢泵的试验结果表明,导叶损失大,导致液氢泵效率低。
Radial piston pump with interior admission;
内配流径向活塞泵;
This pump is of horizontal single stage and single suction type with radial split, axial suction and radial discharge. It is fully enclosed and leakage free.
该型泵为单级、单吸、卧式、径向剖分,轴向吸入、径向排出。全密封,无泄漏。
The radial piston pump can adopt manual-control or electro-hydraulic proportional control to realize the control of constant flow, constant pressure, constant power and load sensitivity etc.
径向柱塞变量泵可以采用手动控制、电液比例控制或负载敏感控制等多种控制方式,实现恒流量、恒压力、恒功率的控制。
This apparatus is enable to change the rotational speed of the pump in a wide range, to heat recirculating water and to load both axial and radial forces on the pump spindle.
该装置的特点是调速范围大,工作介质温度高,可以同时对泵轴进行径向和轴向加载。
Secondly, analyzing statics characteristic of the multi-gear pump demonstrates that radial hydraulic pressure, meshing force and resultant force are balanced on the center wheel.
其次,对多齿轮泵的静力学特性作了分析,证明了中心轮径向液压力、啮合力及总作用力平衡。
Simulation results show that the dynamic characteristic of electro-hydraulic proportion controlling radial piston pump using this self-adapting fuzzy PID controller is very good.
仿真结果表明,基于自适应模糊PID控制器的电液比例排量变量泵具有良好的动态性能。
This paper introduces the structure principle of parallel gear pump in plane, analyses the hydraulic forces and mesh forces in radial direction of driving and driven gear.
介绍了平面式并联齿轮泵的结构原理,对主从动齿轮的液压径向力,啮合力分别进行了分析。
As has been shown in practice, it is a new generation of the radial plunger pump which has new structure and reason...
实践证明,该泵是一种结构新颖,设计合理的新一代径向柱塞泵。
In the second order, radial basis function neural network was applied to estimate the flow rate of the pump at different rotational speed of the blood pump.
在第二级中,运用径向基网络估计血泵转速连续变化对流量的影响。
The common gear pump has such merits as simple structure, low cost, insensitive oil pollution, etc. but it has such demerits as high flow pulsation, unbalanced radial force, strong noise, etc.
普通齿轮泵具有结构简单、成本低、对油液污染不敏感等特点,但具有流量脉动大、径向力不平衡、噪声高等缺点。
The study indicates that the pump can reduce the radial force on the gear and raise the working pressure of the pump. The pump has vast application vistas.
研究表明,该泵可显著降低齿轮泵的径向力,提高泵的工作压力,具有良好的应用前景。
The paper proposes a new method to realize constant power control for electrohydraulic proportional load-sensing radial piston variable displacement pump.
本文提出了对电液比例负载敏感径向柱塞变量泵实现恒功率控制的新的控制方法。
In this paper, a detailed analysis is presented for the radial forces of gear pump with expended high pressure area. Some accuracy formulas are given.
本文详细地分析了具有扩大高压区结构的外啮合齿轮泵的径向力和传动扭矩,给出了其精确计算公式。
Axial Force and radial Force of the pump are bore by single-direction thrust ball bearing, single-row radial ball bearing and sliding guide axle.
泵轴向力与径向力,均由轴承盒内所装单向推力球轴承,单列向心球轴承及滑动导轴所承受。
应用推荐