Using the downloadable diag facility b57udiag -cmd, choose the device and then disable PXE boot.
使用下载的诊断工具 b57udiag-cmd，选择设备，然后禁用PXE 引导。
As an example, consider a client computer getting the address 192.168.0.2 from the server during PXE boot.
例如，假设一台客户计算机在PXE启动期间从服务器得到地址192.168.0.2。
The idea is to take a default firmware update image and modify it so that you can use it as a PXE boot image.
其原理是获得一个默认固件更新镜像，对其进行修改，这样就可以把当用作PXE启动镜像。
Once you are satisfied with your modified BIOS update image, you can create a PXE boot image from the floppy disk with the following command.
对修改后的BIOS更新镜像满意之后，就可以用以下命令用软盘创建PXE启动镜像。
When all updates are complete, return the default PXE boot configuration to boot from local disk to avoid any accidents if a computer were to make a PXE request.
更新完成后，把默认PXE启动配置改为从本地磁盘启动，防止计算机再次发出PXE请求时发生意外。
If you have PXE support enabled through the System Setup Program (see Integrated Devices Screen), this keystroke allows you to configure NIC Settings for PXE boot.
如果你启用了PXE支持通过系统设置程序(见集成器件屏幕)，这按键允许您配置PXE启动网卡设置。
This problem affects the storage nodes where, if PXE boot is enabled, there is not sufficient space for the Qlogic PCI adapters to initialize properly. One work around to this is the following.
如果启用了PXE引导，这个问题就会影响存储节点，其中Q logicPC i适配器没有足够的空间正确进行初始化。
Also, the principles behind this type of firmware update can also be applied to any other type of firmware you might need to flash, as long as you can obtain a firmware update image to PXE boot.
而且，这类固件更新使用的原则也可以应用到需要刷新的其他类型的固件，只要能从PXE启动得到固件更新。
Now ensure your PXE boot configuration file can send the correct image by changing the appropriate comment to set the default to BMC in the /tftpboot/pxelinux.cfg/default file previously created.
现在修改适当的注释，在前面创建的 /tftpboot/pxelinux.cfg/default文件中设置BMC 为默认项，确保PXE启动配置文件能发送正确的镜像。
For this step, each node must be booted using the PXE network boot option in the BIOS.
对于这个步骤，每个节点都必须在BIOS中使用PXE网络启动选项来启动。
The virtualization support will include alternative boot sources, ISO mounts, PXE, building your own images, and cloning images from other machines.
虚拟化支持包括可选择的启动源、ISO挂载、PXE、构建自己的镜像以及从其他机器克隆镜像等。
Clients without a CD-ROM drive but with a Linux-supported bootable network card, for example, can boot remotely from a Knoppix-running server by means of PXE.
例如，不带CD - ROM驱动器，但是带有支持Linux的可引导网卡的客户机可以通过PXE从正在运行Knoppix的服务器进行远程引导。
Note that if your project does not require a hard disk, as is the case for many thin clients, it must boot via CD, USB, or Preboot eXecution Environment (pxe-that is, network boot).
注意，如果您的项目不需要硬盘(许多瘦客户机就属于这种情况)，则它必须通过CD、u SB或Preboot eXecutionEnvironment (PXE—也就是网络)来启动。
This means that a PXE server must respond within that time period to ensure that the client boots from the network and that it does not pass to the next device in the boot order.
这意味着PXE服务器必须对作出响应，以确保从网络引导客户机，并且它不传递到下一个设备启动顺序中的该时间段内。
All PXE request packets have a DHCP option value that indicates the time (in seconds) since the most recent boot.
所有的PXE请求数据包具有一个dhcp选项值，该值指示最近启动以来的时间(以秒为单位)。
This enables a PXE server to know (at boot time) the exact architecture of the client from the first network boot packet.
这使PXE服务器能够知道(在启动时)从第一个网络引导数据包的客户端的确切的体系结构。
PXE defines the way in which a PC should load its operating system from a remote boot server.
PXE定义了从远程引导服务器给PC机装操作系统的方法。
A discover image is a type of boot image that you can use to install an operating system on a computer that is not capable of network booting using the Pre-Boot Execution Environment (PXE).
发现映像是网络的一种可用于不能引导使用预启动执行环境(PXE)的计算机上安装操作系统的启动映像。
A discover image is a type of boot image that you can use to install an operating system on a computer that is not capable of network booting using the Pre-Boot Execution Environment (PXE).
发现映像是网络的一种可用于不能引导使用预启动执行环境(PXE)的计算机上安装操作系统的启动映像。
应用推荐