Fluoride sulfonic proton exchange membrane has a much bright future for its high thermal stability, high chemical stability and good mechanical strength.
含氟磺酸型质子交换膜是一类具有高热稳定性、化学稳定性及良好机械性能的离子交换膜,具有极其广阔的应用前景。
Electrocatalyst durability has been recently recognized as one of the most important issues that have to be addressed before the commercialization of the proton exchange membrane fuel cells (PEMFCs).
近来电催化剂的稳定性被认为是质子交换膜燃料电池(PEMFC)商业化之前需解决的最重要的问题之一。
Output voltage of proton exchange membrane fuel cell was modeled for control design.
为了进行电池控制设计而为电池输出电压建立模型。
Second, we prepared the pore-filling organic-inorganic hybrid proton exchange membranes.
制备了三维有序大孔填充的有机-无机杂化质子交换膜。
The principal component influencing the performance of the DMFC is proton exchange membrane.
作为其重要组成部分的质子交换膜的性质是影响电池性能的关键因素。
Bipolar plate is one of the critical components of proton exchange membrane fuel cell (PEMFC).
双极板是质子交换膜燃料电池(pemfc)的关键部件之一。
Humidifying technology is one of key technologies for proton exchange membrane fuel cell (PEMFC).
增湿技术是质子交换膜燃料电池(pemfc)的关键技术之一。
A gas diffusion media for a fuel cell, such as a proton exchange membrane fuel cell, is provided.
提供用于燃料电池例如质子交换膜燃料电池的气体扩散介质。
A new structure of static water removal for proton exchange membrane fuel cell (PEMFC) was designed.
设计了一种新型的质子交换膜燃料电池的静态排水结构。
The necessity of humidification treatment for reacting gas of the proton exchange film fuel cells is dissertated.
阐述了对质子交换膜燃料电池反应气体进行加湿处理的必要性。
This paper reviews the research progress in sulfonated polyimidesas materials for proton exchange membrane fuel cell.
综述了磺化聚酰亚胺作为质子交换膜燃料电池中膜材料的研究概况。
Aim at the response lagging of proton exchange membrane fuel cell electronic vehicle, which affects its commercialization.
针对质子膜燃料电池电动车响应速度较慢影响其商业化问题。
This paper reviews the research progress in sulfonated polyimides (SPI) as materials for proton exchange membrane fuel cell.
综述了磺化聚酰亚胺作为质子交换膜燃料电池中膜材料的研究概况。
The practical significance of CO removal in methanol reformed gases for proton exchange membrane fuel cell (PEMFC) was introduced.
评述了质子交换膜燃料电池(pemfc)甲醇重整气中CO去除的现实意义。
The membrane electrode assembly (MEA) and the bipolar plate were the key components of proton exchange membrane fuel cell (PEMFC).
膜电极和双极板是质子交换膜燃料电池(pemfc)的关键组件。
The effects of fuel cell structures and operating condition on the performance of proton exchange membrane fuel cells are discussed.
讨论了电池结构参数和运行条件对质子交换膜燃料电池性能的影响。
After expounding the working principles of the PEMFC, the research progress in proton exchange membrane and catalyst are introduced.
本文在阐述了质子交换膜燃料电池工作原理的基础上,首先介绍了其质子交换膜与催化剂的研究现状。
Thermodynamic and kinetic considerations for the ethanol electrooxidation in a proton exchange membrane fuel cell(PEMFC) were discussed.
从热力学和动力学角度讨论了质子交换膜燃料电池中的乙醇电氧化过程。
The performance of Bipolar Plate directly affects the reliability, stability and longevity of proton exchange membrane fuel cell (PEMFC).
双极板性能的优劣直接影响着质子交换膜燃料电池(pemfc)的可靠性、稳定性和寿命。
Research progress in PEMFC including catalyze, electrode, proton exchange membrane, electrolyte, bipolar board and carbon nano-tube were described.
综述了包括催化剂、电极、质子交换膜、电解质、双极板和碳纳米管在内的质子交换膜燃料电池的研究进展。
Variously existing mathematical models of proton exchange membrane fuel cell (PEMFC) were introduced and sorted by their structures and working mechanisms.
介绍了质子交换膜燃料电池(PEMFC)至今已有的各种数学模型。根据PEMFC的组成结构、工作原理进行了模型分类。
Widely application of proton exchange membrane fuel cell in automobiles will make a contribution to savings on fuel and reduction in the atmospheric pollution.
质子交换膜燃料电池在汽车上的规模应用有助于降低燃料消耗,减少大气污染。
Reversible proton exchange membrane fuel cell (RPEMFC) is an electrochemical cell working both as the water electrolyzer (charging) and fuel cell (discharging).
可逆质子交换膜燃料电池(RPEMFC)是一种在同一装置上实现水电解(充电)和燃料电池发电(放电)两种功能的储能电池。
This paper reviews the influence of air contaminants, i. e., impurities in air stream of cathode, on the performance of proton exchange membrane of fuel cells (PEMFC).
论述了城市空气污染物(即阴极气体杂质)对质子交换膜燃料电池(PEMFC)性能的影响。
This paper is to develop the economic and convenient hydrogen source from partial oxidation and steam reforming gasoline for the proton exchange membrane fuel cell (PEMFC).
本论文的目的是研制开发以汽油为原料的经济、方便的质子交换膜燃料电池(PEMFC)的氢源。
In this study, the swelling problem of the proton exchange membrane in MEA fabrication is solved by using the self-manufacture jig and the heating system below the membrane.
在MEA 制程中,当质子交换膜涂布时,膜会产生皱缩和膨胀问题,利用自制夹具和底部加热系统,将此问题解决。
The optimal composition of catalyst layer in proton exchange membrane fuel cell (PEMFC) electrode was prepared through orthogonal method, which is called hydrophilic electrode.
利用正交实验设计法优选出质子交换膜燃料电池(PEMFC)电极催化层制备的最佳条件,即制备亲水电极。
Based on the energy conversation of proton exchange membrane fuel cell (PEMFC) stack, the nonlinear temperature model of PEMFC stack with the large range of disturbances is developed.
基于质子交换膜燃料电池电堆的能量守恒,建立了在大范围的负载扰动下电池电堆温度的非线性模型。
Each elongated cell includes a central proton exchange membrane, a cathode element mounted on one side of said membrane and an anode element mounted on the other side of said membrane.
每个细长的电池包括中心质子交换膜、设置在所述膜的一侧的阴极单元和设置在所述膜的另一侧的阳极单元。
The oxygen reduction catalyst can be applied to the fields of proton exchange membrane fuel batteries, direct methanol fuel batteries, metal-air battery cathode materials and the like.
本发明的氧还原催化剂可应用于质子交换膜燃料电池、直接醇类燃料电池和金属-空气电池阴极材料等领域。
应用推荐