The mechanical properties and microstructure as well as reinforcing mechanisms were investigated.
研究了复合材料的力学性能与显微结构，并对强化增韧机制进行了分析。
This paper studies the influences of polymer on the mechanical properties and microstructure of HPLWAC.
研究了掺入聚合物对高性能轻骨料混凝土力学性能及微观结构的影响。
The effects of rare earths on properties and microstructure of low-alloy wear resistance steel were studied.
研究了稀土对低合金耐磨钢组织和性能的影响。
The influence of carbon fiber content on the properties and microstructure of the C/MC composite was studied.
研究了不同纤维含量对复合材料性能的影响。
The effects of cold deformation and heat treatment on the properties and microstructure of alloy GH169 are studied.
研究了冷变形与热处理工艺对GH169合金组织和性能的影响。
Mechanical properties and microstructure of metabainite (BZ11) and 20 steel were studied at different temperatures.
研究了准贝氏体钢和20钢在不同温度下的组织和力学性能。
This paper deals with the mechanical properties and microstructure of two kinds of new four grade chain cable steels.
本文对两种新型四级锚链钢的力学性能与显微组织进行了研究。
Influence of fibre content, fibre style on the mechanical properties and microstructure of the composites are discussed.
探讨了纤维含量、纤维类型对复合材料力学性能和微观结构的影响。
The magnetic properties and microstructure of Fe3O4 thin films prepared under different conditions have been evaluated.
本文报导了不同制备条件下四氧化三铁薄膜的结构和磁性。
The influences of glass fiber (GF) and glycol on the mechanical properties and microstructure of PA66/GF composite were studied.
研究了玻璃纤维（GF）、乙二醇对PA66/GF复合材料性能和微观结构的影响。
The influence of squeeze casting technique on mechanical properties and microstructure of bar-shaped ZA27 alloy was investigated.
分析了挤压铸造工艺对棒状ZA27合金力学性能及组织的影响。
Results showed that the basic physical properties and microstructure of recrystallized graphite with dopant zirconium was improved.
结果表明，掺杂锆使再结晶石墨的基本物理性能及其微晶结构有较大幅度的改善。
The basic properties of some expansive soils such as composition, physic-chemical properties and microstructure etc. are studied in this paper.
本文就笔者搜集到的几种不同的膨胀土样进行了基本特性研究，如物质组成、物理化学性质、微观结构等。
The Influence of quenching temperature and tempering temperature on mechanical properties and microstructure of ZG310-510 cast steel was studied.
研究了淬火温度和回火温度对ZG310- 510铸钢组织和力学性能的影响。
This study examines the properties and microstructure of viscose rayon-based activated carbon fiber (ACF) adsorbent modified by supporting silver.
本研究目的系利用金属银抗菌的特性，在嫘萦系活性碳纤维表面进行镀银改质。
Influences of normalizing temperature and tempering temperature on mechanical properties and microstructure of ZG310-570 cast steel were investigated.
研究了正火温度和回火温度对ZG310- 570铸钢组织和力学性能的影响。
The variation of properties and microstructure of the low carbon microalloyed steel with vanadium was analyzed after tempering at different temperatures.
研究了含钒低碳微合金钢经过不同温度回火的性能和组织的变化关系。
The technique, properties and microstructure of the graphite porous PTCR that is prepared by using commercial materials are introduced and researched in this paper.
对采用规模工业级原料取得的石墨造孔PTCR的工艺技术、性能和微观结构进行了全面的研究和探讨。
The properties and microstructure were observed and analyzed by the modern test method. Factors that influenced ceramic pore feature and volume density were discussed.
采用现代测试方法测定了样品理化性能，观察分析了样品的显微结构，并探讨了影响多孔陶瓷滤料孔特性和体积密度的诸因素。
The tensile properties and microstructure of LF6 aluminum alloy weld joint under simulating near earth space environment are studied by means of vacuum thermal cycling system.
采用真空热循环试验装置，模拟近地轨道空间环境，研究了LF 6铝合金焊接接头拉伸性能和微观组织，分析讨论了真空热循环对焊接接头的影响规律。
The recent status and trend of the development of metal oxide coated anode are reviewed with relationships between its electrochemical properties and microstructure discussed.
综述了电解海水用金属氧化物涂层阳极的研究现状和发展趋势，以及该阳极的电化学特性与微观组织结构的关系。
Tensile properties and microstructure of the first loading region, last region and transition region of TA15alloy parts with different local loading were studied by experiment.
研究了不同加载方式下TA15钛合金方坯先加载区、过渡区和后加载区的组织和力学性能。
The effects of RE compound modificator on the mechanical properties and microstructure of high carbon high speed steel used for roller ring were investigated by SEM, EDS and EPMA.
通过扫描电镜、能谱分析仪和电子探针研究了稀土复合变质剂对离心铸造的高碳高速钢轧辊组织和力学性能的影响。
When the local loading is applied only, the tensile properties and microstructure are better in comparison with those with local loading first and than with whole loading at last.
只采用局部加载时，各区的组织性能优于先局部后整体加载时各区的组织性能。
The electrical conductivity, hardness and mechanical properties of Cr Cu alloy in various heat treatment states are tested and its properties and microstructure variations are analyzed.
测试了高导电铬铜合金在各种热处理状态的导电率、硬度和力学性能，并分析了性能变化及金相组织。
In this paper, the axial-fed plasma spraying gun was used to obtain ceramic coatings on steels. Its parameters, properties and microstructure were compared with those of a traditional one.
对比研究了新型轴向送粉等离子涂枪和普通等离子喷涂枪的喷涂工艺参数和制备涂层的性能及其组织。
A support material with low expansivity and high conductivity, called DG alloy, was prepared by powder metallurgy. The effects of sintering process on its properties and microstructure were studied.
采用粉末冶金技术制备了一种低膨胀高导热支撑材料(简称DG合金)，研究了烧结工艺对合金组织和性能的影响。
However, there are large distinctions between the influences of the two types to the workability of cement paste and fresh concrete, the mechanical properties and microstructure of hardened concrete.
它们对水泥净浆和新拌混凝土的工作性的影响有所不同，此外掺加两类减水剂的硬化产物的力学性能和微观结构也具有很大差别。
The microstructure and properties of the pavement asphalt reinforced by polyester engineering fiber were investigated.
研究了两种聚酯工程纤维改性道路沥青的微观结构与性能。
Simulating different solidification cooling rate with step-metal mould and sand mould, the effect of solidification cooling rate on microstructure and properties of high boron steel were studied.
利用阶梯型腔金属模和砂型模拟不同的冷却速度，研究了冷却速度对高硼钢凝固组织和性能的影响。
应用推荐