Applying the numerical simulation program ANSYS to analyze the stability of pillar, it proved pillar is stable.
运用ANSYS程序对煤柱的稳定性进行了数值模拟，验证了煤柱的稳定性。
The static and dynamic characteristics of a weather radar tower are analyzed by using the commercial finite element program ANSYS.
运用通用有限元程序ANSYS对某天气雷达站塔楼结构的静、动力特性进行了分析。
Nonlinear finite element models by incorporating geometric and material nonlinearities were developed using finite element program ANSYS.
首先利用ANSYS程序建立了构件的非线性有限元模型，模型中包含了几何和材料双重非线性。
The overall stability tests of monosymmetric I-shaped overhanging beams and two-span continuous beams are simulated by finite element program ANSYS.
利用ANSYS有限元程序对单轴对称工字形单伸臂梁和双跨连续梁整体稳定试验进行了有限元模拟。
The equivalent age method is extended successfully to the concrete cracking control in structures through the use of the finite element program ANSYS.
与有限元软件一起使用，等效龄期方法还可以运用于混凝土结构的温度裂缝预测与控制中；
Using general finite element program ANSYS, we simulate a dynamical evolution process of the lithosphere of west Liaoning, northeast China in the late Mesozoic.
利用大型通用有限元分析软件ANSYS简单模拟辽西地区中生代末期岩石圈动力学演化过程。
Using general-purpose finite element program ANSYS, a three-dimensional finite element model of interaction between raft foundation and groundwork soil is established.
结合大型有限元软件ANSYS，建立了筏形基础地基相互作用体系的全三维有限元模型。
One real skew arch bridge is investigated using the finite element program ANSYS so as to study the generic phenomenon of bridge damage, especially the regular cracks.
本文以某斜交拱桥为研究对象，阐述其病害的一般现象，尤其是规则性裂缝。
According to the actual condition of high-cutting slope of Wushan-Wuxi Road K95 section, general-purpose finite element program ANSYS is used to simulate excavation process.
根据两巫公路K 95段高切坡的实际情况，运用ANSYS软件对其开挖过程进行了模拟。
According to consideration of restriction and creep deform in mass concrete, the temperature field and thermal stress are simulated through the finite element program ANSYS.
并考虑混凝土的内外约束及混凝土的徐变变形，用有限元法求解混凝土不利面的温度应力，并用大型有限元软件ANSYS对温度场和应力场进行了模拟。
The simulated wind vibration loads are then applied to the time-history analysis of wind vibration response of single-layer spherical latticed shells by the finite-element program ANSYS.
将模拟出的风荷载作用于单层球面网壳，用有限元程序ANSYS进行了网壳结构的风振响应时程分析。
Thirdly, we apply the theory of increment method to analyze the stress field of basement in construction period under the action of temperature and shrinkage strain by finite program ANSYS.
再次，运用增量法的原理，用ANSYS分析地下室结构施工期间在温度、收缩变形作用下的应力场。
Using FEM theory and large general-purpose program ANSYS, the paper discussed the cable-stayed bridge space stress characteristic and the relationship between several main design parameters.
在桥梁成桥以后，采用有限元理论和大型通用程序ANSYS研究探讨了斜拉桥结构的空间受力特性，并分析了斜拉桥几个主要设计参数之间的相互关系。
A simulative calculation was conducted of the natural frequencies of the frame towers using large-scale finite element program ANSYS, and the calculated value was compared with the test value.
利用大型有限单元程序ANSYS对框架塔的自振频率进行了模拟计算，并将计算值与试验值进行了对比。
By means of the finite element program ANSYS and using orthogonal design method, the parameters having effect on the stability of this structure were analyzed and primary factors were obtained.
本文利用ANSYS有限元程序通过正交设计的方法对格构式斜腿刚架进行了平面外整体稳定承载力参数分析，得到显著影响因素。
The transient temperature and stress field during starting of a turbine first stage disc's 3-dimensional model has been calculated by using the general finite element calculation program ANSYS.
用通用有限元计算程序ANSYS对某燃气轮机启动过程中透平第一级涡轮盘的三维模型瞬态温度和应力场进行计算。
This paper discusses the analysis on forces and determination of installation dimensions of main structural parts of the suspension pipe bridge by means of finite element analysis program ANSYS.
文章对在悬索式管桥体系中应用ANSYS程序有限元结构分析方法，分析管桥主要构件的受力情况并确定安装尺寸方面进行了探讨。
The calculate result proves that the ANSYS program is an effective calculation tool for wave load and power analysis.
计算实例说明ANSYS的动力模块程序是计算波浪载荷，进行动力分析的有效工具。
This analysis process can be compiled with the command chain APDL in the ANSYS software; it can also serve as the post-process program to some similar structure.
用ANSYS中的命令流apdl把以上分析编写成疲劳分析的后处理程序可以作为相似结构疲劳分析的后处理程序。
Connecting the strength reduction of finite element method, the paper used the new criterion to analyze slope stability problems by importing it into ANSYS program.
本文将新准则引入到大型通用有限元程序ANSYS中，并与强度折减系数法相结合用于分析岩土工程中的边坡稳定问题。
Partial buckling of hoist boom is analyzed with ANSYS finite element program.
采用ANSYS有限元程序分析起重臂的局部屈曲。
Finally, the parametric simulation program was designed with ANSYS APDL language, various simulation of welding and hammer peening can be analysed through defining different parameters.
最后，利用APDL语言编制了具有一定通用性的参数化模拟分析程序，通过改变模拟参数可以模拟分析不同条件下的焊接与锤击处理。
The characteristics of loading transmission of the CFG pile composite foundation has been analyzed by use of the ANSYS program.
采用有限元ANSYS程序对CFG桩复合地基的应力传递特性进行了分析；
Finally, by using the ANSYS program, the thermal vibration characters of the plate and missile body structures with different materials is analyzed.
最后，采用ANSYS程序分析了合金材料、复合材料的板、弹体结构的热振动特性。
Designed model established by ANSYS program is used to analyze the loading behavior of the CFG pile composite foundation such as vertical displacement, stress and character of destructive capability.
利用ANSYS有限元程序建立模型，对CFG桩复合地基承载性状(竖向位移、应力分布、破坏特点等)进行了分析。
ANSYS program is a good tool that carries on thermal and structural analysis, and its application on the ladle is very wide.
A NSYS程序是进行热和结构分析的好工具，它在钢包上的应用非常广泛。
The calculation of the examples proves that the result of the nonlinear FEM program is consistent with that of ANSYS.
算例结果表明，本文的三维土体非线性有限元程序与大型通用软件ANSYS结果吻合，计算结果令人比较满意。
The calculation of the examples proves that the result of the nonlinear FEM program is consistent with that of ANSYS.
算例结果表明，本文的三维土体非线性有限元程序与大型通用软件ANSYS结果吻合，计算结果令人比较满意。
应用推荐