A statistical regressive mathematical model for processing the measured data of lossless network is presented.
提出了处理无耗正切关系网络测量数据的统计回归数学模型。
Based on the Wien's law temperature and emissivity of flame were obtained by processing the measured data with an optimization algorithm.
根据这一特点,从维恩公式出发,利用最优化方法处理测得的火焰辐射光谱信号,得到了火焰的温度和黑度。
By measuring the capacitance of sub-capacitor sensor then processing the measured data to get the interface position is the overall idea of this paper.
通过测量各分段电容传感器然后对测得的数据进行分析处理得到各界面位置是本论文的总体思路。
In summary, parallel processing, in the context of DataStage, is an internal characteristic of a job that is measured by the number of data or processing partitions that are utilized.
总之,在DataStage上下文中,平行处理是一个作业的内部特征,该作业通过被利用的数据或处理分区的数量来测量。
The contact force during impact process was measured by force sensor and data signal processing system in real time.
冲击过程中的接触载荷由压力传感器及数字信号处理系统实时测量。
This paper introduces a data processing method about the low yield neutrons from irradiation drive which are measured at the "Shenguang" facility with a plastic scintillation detector.
本文介绍了在“神光”装置上用塑料闪烁探测器测量辐射驱动内爆低产额中子的数据处理方法。
Based on introduction of main properties of MATLAB language, the advantages of processing measured fan's performance data through MATLAB language and using Least Square Method are discussed.
介绍了MATLAB的主要特性,并讨论利用MATLAB语言通过最小二乘法对风机性能实测数据进行处理的优点。
Through theoretical analysis and processing the real measured data, the new method is proved to be right and feasible.
通过理论分析和对机载双通道雷达实测数据的处理,验证了该方法的正确性和有效性。
This paper introduces the methods of gathering the signal and data processing when a force is measured by multiple load cells.
本文介绍了用多个力传感器共同实现对一个力负荷进行测试的信号采集方法和数据处理方法。
A diagram of variation of acceleration with time was drawn up by processing the measured original displacement data using the data processing software.
测得原始位移数据后,利用数据处理软件对位移进行处理,得出的加速度随时间的变化图形。
The practical fiber ODFs of nonwoven fabrics with 4 different processing methods are measured and the data are compared with that of fiber orientation distribution measured by microscope projector.
实际测定了四种不同加工方法的非织造布纤维取向分布函数,并将数据与显微投影法测得的纤维取向分布实测数据进行了比较。
In measuring and evaluating the parallelism error with the leveler, data processing is conventionally carried out by manually graphic and calculation methods according to the data measured.
在使用水平仪对平行度误差进行测量及评定时,目前一直沿用着用手工按图解法或计算法进行数据处理。
The measured signals are sent to the computer for data analyzing and processing.
检测信号送计算机,由计算机进行数据分析和处理。
This paper describes the design features of a test bed for diesel engine combined with hydraulic torque converter and represents the test specifications and the processing of measured data.
本文介绍一种柴油机-液力变矩器联合试车装置的结构特点、试车规范及测试数据的计算。
An data-processing method was developed to obtain the device parameters from the resistance-voltage(R-V) characteristics measured in long-wavelength HgCdTe photodiode.
报道了一种适用于碲镉汞长波光伏探测器的由典型电阻电压(R-V)曲线提取器件基本特征参数的数据处理途径。
The line density of varied-line-space gratings have been measured by using interferometry. The principle and geometry are introduced, the methods of data processing and the results are given.
用干涉法测量变线距光栅的线密度,给出了测量原理、实验中的光路、数据处理的方法、测量结果。
Through theoretical analysis and processing the real measured data, the method is proved to be exactness and feasible.
通过理论分析和对机载双通道雷达实测数据的处理,验证了该方法的正确性和有效性。
The measured data show that the cascade filtering of CIC and ISOP is suitable for signal processing in seismic exploration.
实测数据表明,CIC与IS O P滤波器级联适用于地震勘探信号处理。
The air shock wave is measured by the multiple channel data acquisition and processing system and the blast damage power to ground surface targets is evaluated by the simulation targets.
本文通过相同条件下不同炸高的FAE装置进行实验,利用多通道数据采集仪和地面模拟目标进行空气冲击波测量和地面毁伤效应评估。
The air shock wave is measured by the multiple channel data acquisition and processing system and the blast damage power to ground surface targets is evaluated by the simulation targets.
本文通过相同条件下不同炸高的FAE装置进行实验,利用多通道数据采集仪和地面模拟目标进行空气冲击波测量和地面毁伤效应评估。
应用推荐